Reviews
very good
CB750 RC42 2006
I changed from OEM's Light.
As we all wrote, we were able to exchange with Driver alone.
I pushed the two OEMLight and turned it like turning it and pushed this product to the opened Socket and installed it.
Since this product is one socket, it will be finished if it is installed in either one.
Leave one left alone (Remove Light) So I'd like to close it with something.
The brightness that illuminates the brightness of the Stop-lamp and the Number is also perfect.
I thought that I wanted to reduce the load of Battery, power saving and exchanged.
Very easy, finished in a very good feeling, I am satisfied.
View detail
Fits: HONDA motorola, HONDA v-twin magna [v-twin magna]., HONDA V-TWIN MAGNA [V-Twin Magna] S, HONDA TOPIC [Topic]., HONDA TOPIC [Topic] PRO, HONDA NS-1, HONDA JADE [Jade]., HONDA GYRO [Gyro] X, HONDA GYRO [GYRO] UP50, HONDA GB250 CLUBMAN [Clubman] Type 4, HONDA GB250 CLUBMAN [CLUBMAN] Type 1, HONDA gb250 clubman type 1 - type 4, HONDA CB-1 400, HONDA motorola, HONDA v-twin magna [v-twin magna]., HONDA V-TWIN MAGNA [V-Twin Magna] S, HONDA TOPIC [Topic]., HONDA TOPIC [Topic] PRO, HONDA NS-1, HONDA JADE [Jade].
Untitled
Arrived in 3 days after ordering
Once installed, Size is perfect
It was easy to install! Also looks with the product image
It is bright and it seems like LED will be recognized soon
The price is high, but ...
But I am satisfied with Large change!
View detail
Fits: SUZUKI GSX250S KATANA [Katana]., SUZUKI GSX400S KATANA [Katana]., SUZUKI IMPULSE400 [Impulse]., SUZUKI GSX250S KATANA [Katana]., SUZUKI GSX400S KATANA [Katana]., SUZUKI IMPULSE400 [Impulse].
bright!
Until now I bought the LED Bulb purchased by Yahoo auction, but the difference in brightness between Small lighting and Brake is small, I was worried that the following car will not come in when running and stopping. However, such anxiety disappeared from this LED Unit. Compared with Yahoo auc's LED Bulb, the brightness at the time of Small lighting became much brighter and I think that the difference from when you hit Brake is solid.
The Reverse side of UnitBody is Coking and Waterproof is also perfect. Although it is expensive, it is Recommendation because it is possible to remove the Valve of OEM and leave it as it is.
View detail
Anyway it's bright
Charging of the smartphone and electric equipment increased to Grip heater and ETC, so I switched to LED Tail Lamp if it became a little power saving.
(Since the voltage before replacement was not measured, the effect is unknown.)
Regardless of the power saving effect, it became much brighter compared to NORMAL.
It seems that it will be a trouble for the following car.
However, the appearance is not so conspicuous each LED sphere, the Dress-up effect that it is changed to LED with the feeling that it is a bright Halogen bulb? Is not so good.
P. S. The exchange is very easy, but the NORMAL ball is hard, it pushes and turns but it did not turn easily and it could not come off.
View detail
Fits: HONDA XR350, HONDA XLR250, HONDA XL250 [Degree]., HONDA VRX400, HONDA TLR200, HONDA NSR50, HONDA GB400 TT, HONDA FTR223, HONDA CRM250 AR, HONDA CBR400 F, HONDA XR350, HONDA XLR250, HONDA XL250 [Degree]., HONDA VRX400, HONDA TLR200, HONDA NSR50, HONDA GB400 TT, HONDA FTR223, HONDA CRM250 AR, HONDA CBR400 F
It shines beautifully
Visibility from the side is not good, but it looks beautifully when looking from directly behind in Smoked lens.
Visibility well from a fairly long distance and good visibility from the back is good.
View detail
Old Motorcycle is now Motorcycle!
Until now, how many types of LED bulbs have I worn, but I did not care for brightness at the same time and did extra expenses
I regret having to do this from the beginning.
But I am convinced now!
View detail
Fits: SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana]., SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana].
Voltage stability
I got lost as to whether to make Made in China with a lower price to exchange as Assi, but I chose this in terms of confidence. I was able to install it to KATANA without problem. As a precaution when installing, it is necessary to remove the light bulb, insert the Socket firmly all the way inwards, then turn it to lock it. Otherwise the License lamp will not light up.
Even if the rectality is normal, when the Stop-lamp is lit with LightOn in the Idling state waiting for the signal, the voltage drops to the 11v level. That Spec. Maybe it's pretty exciting to watch the voltmeter. When this LED is replaced, the voltage no longer drops. I think that it is better to exchange those who have similar circumstances by all means.
View detail
Fits: SUZUKI GAG [gag]., SUZUKI GSX-R750 GR71, SUZUKI RG400, SUZUKI RG500γ, SUZUKI RG250, SUZUKI RG400, SUZUKI RG500γ, SUZUKI RG250
Lens does not come off.
Used for RG 500 γ. Instruction Manual also has nothing.
It is necessary to remove OEM's Lens for installation, but it can not be removed.
I soaked it in hot water and warmed up, but Hot bond is painted solidly and I can not take it at all. After all Lens has broken.
There is a murmuring structure which removes Lens attached with Hot bond and install.
I bought and regretted.
View detail
Fits: YAMAHA XG250 TRICKER [Tricker]., YAMAHA VINO [Vino] (SA10J) (2-stroke model), YAMAHA VINO (5AU) (2-stroke model), YAMAHA serow 250 [serow]., YAMAHA serow 225 [serow] (type 2), YAMAHA serow 225 [serow] wwe, YAMAHA serow 225 [serow] w, YAMAHA serow 225 [sero] s, YAMAHA XG250 TRICKER [Tricker]., YAMAHA VINO [Vino] (SA10J) (2-stroke model), YAMAHA VINO (5AU) (2-stroke model), YAMAHA serow 250 [serow]., YAMAHA serow 225 [serow] (type 2), YAMAHA serow 225 [serow] wwe, YAMAHA serow 225 [serow] w, YAMAHA serow 225 [sero] s
- He buys it and there is no loss.If it is into [ dark ] , a difference is known clearly.It seems that the visibility from and a following car becomes good. and exchange were dramatically easy. It is enough if there is a Plus driver in th
- He buys it and there is no loss.If it is into [ dark ]
, a difference is known clearly.It seems that the visibility from
and a following car becomes good.
and exchange were dramatically easy.
It is enough if there is a Plus driver in the case of a XG250 TRICKER.
View detail
Since it was a weak Motorcycle of the Battery, it purchased targeting power-saving. attachment is super-simplicity, one + Driver, and 5 minutes. Although there is no description, it has no problem! When goods were gained to beginn
Since it was a weak Motorcycle of the Battery, it purchased targeting power-saving.
attachment is super-simplicity, one + Driver, and 5 minutes.
Although there is no description, it has no
problem!
When goods were gained to
beginning, it thought a handmade feeling is uncanny --, and felt some uneasy.
When the light was made to switch on after
attachment, it is uniform and
visibility felt it high rather than the electric lamp with a Beauty light.
It does not change even now which passed for six months.
Although the price was wavering highly, they were goods in which
satisfaction goes.
View detail
Fits: KAWASAKI ZEPHYR400χ [Zephyr]., KAWASAKI ZEPHYR400χ [Zephyr].
It purchased for energy saving of the prevention from a rear-end collision, and a Battery. I think that it is brightly conspicuous since there are more balls than the LED Tail of other company. attachment is easy -- past -- it is -- ♪
It purchased for energy saving of the prevention from a rear-end collision, and a Battery.
I think that it is brightly conspicuous since there are more balls than the LED Tail of
other company.
attachment is easy -- past -- it is -- ♪
View detail
Fits: HONDA GYROCANOPY [Gyrocanopy]., HONDA GYROCANOPY [Gyrocanopy].
[ -- the re-contribution ] -- [usable years ] -- removing the Tail lens stopped on the two [attachment] Screws about two months, and only substituting the power-source part of this article for the Socket which extracted the Normal valve
[ -- the re-contribution ]
-- [usable years
] -- removing the Tail lens stopped on the two
[attachment]
Screws about two months, and only substituting the power-source part of this article for the Socket which extracted the Normal valve! The hole of this article is united and attached to
tail body Screw receptacle portion.
It is great although the hole Size and the position were probably manufactured with the laser cutter and the Drill by the Exactly.
working hours did not take 5 minutes.
The Tail of lighting and the illuminance difference of the Brake are always [
[wearing effect]
] carrying out clearly, and it can be very much satisfied.
In the
Valve type, there is the visual confirmation effect unique to the Unit type which is not obtained, and it can be declared that it is more than a NORMAL.
The LED Unit purchased before the
[individual subjectivity]
in order to attach to other vehicles,
The resistance included in the Tail side by itself since illuminance difference of a Tail and a Brake was not able to be used few was exchanged, or since it was a made severe thing for which the position of a fitting hole shifts and is sufficient, it was ready for some repair this time also, but it was a completely perfect satisfying thing.
Although the quite expensive thing had resistance, it is the result which convinces him of a price, and considered it as the highest evaluation.
View detail
It remains as it is, and is exchanging Lamps and the work, and a webike Monitor Tail lamp cover is LED-ization. Termination of easy replacement of 1~2-minute work. Although it is an object for ST4, he attaches also to ST3 and has no problem.
It remains as it is, and is exchanging Lamps and the work, and a webike Monitor
Tail lamp cover is LED-ization.
Termination of easy replacement of
1~2-minute work.
Although it is an object for
ST4, he attaches also to ST3 and has no problem.
View detail
* which the electric lamp had exhausted since he wanted to reduce the burden on a Battery if possible and which was poured, boiled and exchanged -- since it only changes with a pure Valve, anyone can attach easily. although it cannot check by its
*
which the
electric lamp had exhausted since he wanted to reduce the burden on a Battery if possible and which was poured, boiled and exchanged -- since it only changes with a pure Valve, anyone can attach easily.
although it cannot check by itself while
running -- night -- lighting confirmation, then
-- it turned out that visibility is also going up pure lay clearly.
The always [
] turned-on Tail light is v which is an excellent piece with this price excellent also as a Cost performance in
LED Unit since influence is great to safety and power dissipation.
View detail
Fits: KAWASAKI ZZR400, KAWASAKI ZX-11, KAWASAKI ZZR1100 D, KAWASAKI ZZR1100 D
In the case of ZZR1100, attachment was quite serious although it may be based also on a vehicle type. Although the Tail lens is disassembled and it becomes a form where only contents are replaced, since the Coking of the Lens is carried out, a
In the case of ZZR1100, attachment was quite serious although it may be based also on a vehicle type.
Although the
Tail lens is disassembled and it becomes a form where only contents are replaced, since the Coking of the Lens is carried out, a Dryer etc. need to decompose it over many hours slowly with slight tepidness.
The Plastic of the
Lens also had a Risk of dividing, since it is soft.
I thought that its Type exchanged the whole ASSY of POSH could be a little easier although a price goes up if it does so far.
Although the
instruction manual was not attached, either, since it will answer carefully and concretely if it asks a Manufacturer, a Support is OK.
however the part attached, come out and troubled, and brightness are perfect -- it was .
A good place and a bad place are too going too far, and evaluation is difficult goods.
About the vehicle type which must disassemble a Lens like ZZR1100 at least, recommendation is seldom possible.
.
.
Since attachment difficulty also falls if it is a vehicle type which can remove a Lens easily with a Screw like a BALIUS to
* reverse, it may be recommended.
View detail
Wearing is easy and does not start with 5 minutes.The Screw of the Cover of the Tail lamp is removed with + Driver, a pure Lamp is removed from a two-piece Socket, the Socket of a Kit is inserted in, and it only equips with a Cover. Appearance bec
Wearing is easy and does not start with 5 minutes.The Screw of the Cover of the
Tail lamp is removed with + Driver, a pure Lamp is removed from a two-piece Socket, the Socket of a Kit is inserted in, and it only equips with a Cover.
Appearance becomes quite good touch by easy work.
It is recommended at the nonchalant joke effect.
View detail
Fits: HONDA VTR1000F FIRESTORM [Firestorm]., HONDA VTR1000F FIRESTORM [Firestorm].
Since it will separate if a Tail unit is removed and a Lens is warmed by a Dryer, it only includes in inside. quantity of light is perfect!
Since it will separate if a Tail unit is removed and a Lens is warmed by a Dryer, it only includes in inside.
quantity of light is perfect!
View detail
Although the instruction manual was not contained, when it asks by e-mail, it is Pons attachment in one ♪ Plus driver which corresponded kindly carefully. It is one article of the Recommendation!
Although the instruction manual was not contained, when it asks by e-mail, it is Pons attachment in one ♪
Plus driver which corresponded kindly carefully.
It is one article of the
Recommendation!
View detail
Fits: HONDA CB1000SF, HONDA CBX550 F, HONDA CB1000SF, HONDA CBX550 F
Although the attachment itself was dramatically easy only by removing a Tail light cover and exchanging for an electric lamp, as it was, it was darker than the electric lamp and was in the state where the arrangement of Marume type LED is not visible, eit
Although the attachment itself was dramatically easy only by removing a Tail light cover and exchanging for an electric lamp, as it was, it was darker than the electric lamp and was in the state where the arrangement of Marume type LED is not visible, either. In order to make the flesh side of a Cover diffuse the light of an electric lamp, the board of ? Plastic has pasted up, and it decided to remove it. It has pasted up powerfully, and although having removed without breaking a Cover was serious, it becomes very bright, the arrangement of LED is also clear, and it is like [ dazzling ] at the time of a Brake. Although workmanship was slightly serious, it is dramatically satisfied as a result. However, if it makes a mistake one step, there is a Risk of damaging a cover main body. View detail
Fits: BUELL CYCLONE M2 [Cyclone]., BUELL S1 [Lightning]., BUELL LIGHTNING X1 [LIGHTNING]., BUELL BLAST [Blast].
It was used for Buell M2. It is an old motorcycle, and the manufacturer having no longer existed, when aftermarket parts probably did not come out and I was going to opt for LED-ization by my original work, I discovered these goods. Attachment is to remov
It was used for Buell M2. It is an old motorcycle, and the manufacturer having no longer existed, when aftermarket parts probably did not come out and I was going to opt for LED-ization by my original work, I discovered these goods. Attachment is to remove an established electric lamp and tie to the socket. Since a main part is exactly settled in a lens case and it is equipped with the white LED for number LGTs, optional processing is unnecessary. Since it is an intense motorcycle of vibration although it is in a state without actual damage, this point is a wait-and-see. It usually compares with an electric lamp, brightness is quite UP also at the time of a tail lamp and a brake. From those who run in a back, there is also an opinion that it is dazzling cannot accept reality, and conspicuity is also improving considerably. It is killing two birds with one stone, and it is recommended at a safe side and an image change. View detail