Reviews
It can be used normally
It is safe and normal. It is also normal in terms of price. View detail
Brake CaliperCustom accompaniment
Purchased in conjunction with Caliper replacement.
We are also considering MASTEROverhaul at a later date, so the Quantity:I think 1 pc. spare in 1 Set of 3pcs.
The inside diameter is a little loose, so there is no feeling of being snugly fitted, and you can also feel the responsiveness of the crush feeling when Torque is applied.
The thin cheap ones don't feel crushed when Torque is applied, so I'm worried about using the Torque wrench, but these are thick-walled and fine.
View detail
When replacing the banjo bolt!
I bought this when replacing my Banjo bolt. As a spare! It gives me peace of mind in case of failure. The price was good and reasonable. View detail
the expendables
I have it as a spare because it needs to be replaced when I need to adjust the brake hose routing, overhaul, etc. View detail
Replace when retightening Banjo bolt.
[How is it used?
Used to replace the brake master cylinder.
How was your experience with it?
Material:There are aluminum crush washers available, but since this is not a part that is replaced frequently, we used a copper crush washer this time for durability. To be honest, the crash washer does not make any difference, so I have been able to use it without any leakage from the banjo bolt.
Quantity as a spare because I was planning to take the brake hose off and on in the future.:I bought 1 set of 10pcs. but it is still cheap so I think it is good to have a lot of them.
How did it compare to other products?
I have done spec. for other companies' products, but I don't think there is any particular large difference.
[Points to note]
Be careful with Torque when tightening, and if the same Washer is used many times, it will be crushed and not airtight.
View detail
Let's change it when we retighten the banjo bolt.
Product Name
SWAGE-LINE Swage line Crash washer
Item Number
ESP303
Vehicles
GIORCUB (disc. Spec.)
Number of man-hours
About 2 hours
Why did you choose this product?
I bought it this time along with the brake hoses and other products as a result of the disc conversion of the GIORCUB.
I was not particular about Brand, but chose it because it was the most cost-effective product at the time.
Impressions after using it
Especially with regard to the feel of the product, it is just like a regular CrashWasher and maintains a decent airtight seal.
Recently, there are more and more washers that have rubber on the surface of the washer to tighten the airtightness, but I prefer this type of washer because it may blot due to the possibility of rubber or other problems.
Wouldn't CrashWasher be more reliable for old-fashioned people?
▼ Attention
We do not recommend using the same name for the same purpose.
View detail
For adjusting the handling of the hose.
It is the same Manufacturer's product, so there are no problems. View detail
1pc. extra
I have 1pc. left over and will use it as a spare, but then I am 1pc. short. View detail
I'm doing my job reasonably well.
The one currently in use leaked oil, so I decided that a distortion of the body had occurred because the leak did not stop even though I replaced Seal, so I purchased it for renewal.
The performance of the OEM parts is very different from that of the OEM parts, because the OEM parts did not stop at the high speed corner approach at Izu Skyline. After the change, the same Breaking Point can be used for the approach with no worries.
This product can be installed with confidence because it is crushed during installation by the short parts that support its performance.
View detail
It's the same brand of brake hose, so get it together
I bought the Swage line Brake hose, so I bought the same for Washer, just in case We have them all at Brand
It was a Stainless Hose, so I thought it was the non-aluminum Copper I chose Washer
I braked with Circuit, but of course it doesn't leak, and there is no problem None
View detail
When I remembered
It's not a consumable item, but for some reason I use it often, so I buy it when I remember
In the GSX1300R, the first time around [Color] I went from ClearMesh to Black the second time I replaced it
Even then, I think it's 9 cards in Brake and Clutch?
Quantity in a Rear:1 Set of 4pcs.…。
When I made KLX and CRF also a colored Brake line, … or
Master Cylinder's Overhaul or …
I'm going to have to use it for something, like when I'm organizing I'm gonna go buy some more Like … 。
View detail
Good stuff
I used it for GORILLA's external Front DiscCaliperHose washer
I used it when I changed the brake fluid and the drain bolt when I changed the engine oil I change the washer once every two times, but when I change the brake fluid, I make sure to do it once every time It's just right for the quantity, because it's an exchange, and the feeling of using it is tightening up It's very comfortable and the Pushing of the Torque wrench's tightening sound is very good It feels good
View detail
I've only used the Swage line
I try to keep some stock on hand because it's something I always replace when I remove the Hose etc I've only used the Swage line, so I don't know if it's good or bad, but I've had problems with it I have never done this before View detail
Battle at price
Takekawa Oil cooler's Oil takeout Oil seems to blur from Valve and it leaked even if we tightened it, so we thought about buying KITACO's Oil cooler but if you replace Washer before that I tried to replace it with a regulation Torque firmly tighten it and make it move Large Succeeded! I went to the Touring over 350 km on the next day, but thanks to no bleeding Oil cooler fee Since it floated, other parts can be purchased.
View detail
It is as expected.
Brake hose from NORMAL to DAYTONA product
I bought it together as it was replaced.
For personal tastes, copper is the better one than Aluminum.
View detail
Because I will use it someday
Because it is not a great deal of value, it does not deteriorate due to long-term storage, and it is not troubling at the place. Quantity : 1 Set of 20pcs. I bought it in.
As a thing, it is not possible and it is impossible, it is an ordinary Copper Washer.
It is good to overhaul with ease if there is enough room.
View detail
To exchange Brake hose
With the exchange of Handlebar, I used it for replacing the long part of Brake hose which is Bypassing to h type.
【What made you decide the purchase?】
Especially I was not particular about Brand and Material, but when I first got Brake hose to h type Bypass at the Motorcycle Supplies Store, I was assembling with the invented PLOT made Crash washer, I thought that it should fit all the same product and I bought the same thing.
【How was it actually used?】
There is neither addiction nor impossible normal CrashWire.
Of course, even if you apply Hard to Brake, it will not leak.
【Mounting was difficult?】
Exchange of Crash washer = Air bleeding is indispensable, so if you do not have confidence let's ask obediently Motorcycle shop.
Also Torque is stated in Package so I think that if you have Torque wrench you can assemble with more peace.
【Please tell me the installation point and hang】
I feel painful and crashing crash washer is bad for my heart, so I painted Silicon grease thinly on Crash washer.
By doing so, it does not make it feel stiff and can be gently attached to the heart (Lol)
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
Quantity : 1 Set of 5pcs. Depending on the location, it will be surplus in half, Quantity : 1 Set of 2pcs. Or Quantity : 1 Set of 4pcs. I thought that I also wanted it out.
【Have you compared items?】
- Copper made of PLOT Crash washer
Because I used Black Aluminum Banjo, I thought that Copper Washer was cool, but because I kept the shorter of h type Bypass as it was, I removed it as a candidate that I should go to Tig Hag.
In addition, I will choose Copper Washer when it all assembles.
[Others]
Since it is a re-important security part, I think that it would be better for those who used reliable Manufacturer's things to use things of reliable Manufacturer if they use strange things Manufacturer's stuff.
View detail
The marginal strength
Brake fluid never bleeds or loosens, and it fulfills the Seal nature firmly.
It is made of copper, so the texture is good, different from the Aluminum Washer Luxury feeling is looking for satisfaction.
View detail
Washer
Material : I made it to Fitting of Stainless Steel, so I bought a copper Crash washer. Oil will cause leakage, so be sure to use a new one. View detail
Same Manufacturer
I bought the SWAGE-LINE Easy Order Brake Hose Kit, so Crash washer was also made by PLOT of the same Manufacturer.
Especially, it can be used without problems.
View detail