Reviews
Fits: HUSQVARNA TC 125, HUSQVARNA TC 250, HUSQVARNA TE125, KTM EXC, KTM EXC-F, KTM SX, KTM SX-F
Great replacement clutch lever
Best lever on the market,Buy one of these levers,Looks great and functions flawless. you will remember my words when you drop your bike and race because of a broken OEM lever.Durable levers, bike cartwheeled 4-5 times and the levers only had minor scuffs. View detail
First time Inner protector
With one of these, you can use it all year round.
I used to wear Protector jackets, but they were tacky and I had to change them with the seasons, which was inconvenient.
Chest Protector is a little unreliable, which is a complaint
If you're worried about it, you can just change the chest area.
I wear a t-shirt on my chest in the summer anyway, so I don't think you can tell the difference from the outside, even if you use a different Protector.
170 cm, 62 kg, standard build.
View detail
Good fit
I like LEAD's Helmet because of its high cost performance.
I think the size is a little loose, but it holds up well.
Opening and closing the chin guard requires a lot of force. sun visor did not interfere with Glasses.
The cap is Large size and a bit heavy, but it's a System helmet so it's probably TradeOff.
The ventilation area is very elaborate with Qu-Rear Parts, red stitches, and other small details.
It will be useful for rehydration etc. in summer.
View detail
A bit pricey.
With bar ends made entirely of gold, the basic rule is to replace the bar end when it falls over, but in this case, only the resin part can be replaced, so there is no need to buy a new one if it is just a standing bump.
However, the replacement of the resin part is a bit Large strange.
View detail
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
light
[How is it used?
After installation, the car traveled about 200 km.
Was the installation difficult?
It is not so difficult to install except for the Flange, which is a type of two-piece flange, so it is difficult to install unless you get under the motorcycle.
How was your experience with it?
The OEM one is quieter, both idling and running, but the OEM one is louder. Personally, I was satisfied with the quietness, as it was just right for me. The sound quality is not as harsh as the OEM, but low and smooth.
Lightness is somewhat felt when pushing and pulling.
[Was there anything that disappointed you?
There are too many springs to install, but since spring hooks (devices) are not included, it is better to prepare them.
[Others]
Point or hang for installation...nothing special. If you dare to say so, there is no need to twist the O2 Sensor when installing it. If you install the O2 Sensor lightly before fixing the middle Pipe and turn the Pipe side around, you don't have to worry about the O2 Sensor wiring twist.
Availability and clarity of Instruction Manual - I can understand without it.
Items to buy together...Gasket is a good thing to have. The only other thing I need is heat resistant grease.
【Review】
Personally, I don't like the length of the exhaust end, the degree of raising, and the color (I prefer shorter, lower, and Polished Titaniumium), but I am very satisfied with the lightness, the Hand Bent-like curve of the exhaust pipe, and the high quality sound.
View detail
CHINA.
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
As per other reviewers.
Was the installation difficult?
Replacement with Mirror Lens was difficult. There was a Crack on the Lens from the original and it spread during removal.
The Nose guard was also difficult to remove and left a mark.
How was your experience with it?
This is my first time using Goggles and it worked exactly as I imagined it would.
There was a sensation of a nose being crushed.
[Included Parts:were they on?
Sticker and LensFilm, Film mounting stand
[Was there anything that disappointed you?
It was unfortunate that the 100%Logo paint was peeling.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Neoprene Gloves
[How is it used?
Winter Touring, Bicycle commuting in the middle of winter
How was your experience with it?
Palm is synthetic leather like KUSHITANI's summer gloves?
Motorcycle gloves are tough on the instep even with a Grip heater on.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
It is easy to install.!
OEMHalogen was replaced because it was too dark.
Installation is a simple matter of removing and replacing the OEM. I did a test run during the daytime, and it was a little brighter in the Tunnel. I don't drive much at night, so no problem! I don't drive much at night, so no problem! I don't know about durability, but I'm happy with JAPAN, it's well made and looks good.
View detail
The written Size is different.
The size is written, but the length was 75mm. The width is
Is there something about Sticker, or is there a notation?
Photos are uploaded for reference.
View detail
Lightweight bar ends from KIJIMA
Lightweight bar ends from KIJIMA, ideal to save some weight while still maintaining some vibration damping efects. Can be use on both the stock steel handlebars or aftermarket aluminium ones, as it cames with both adapters type and the Allen tool also. Overall a good quality/price product. View detail
Fits: HONDA PCX125 JF56, HONDA PCX150 KF18
Exhaust System replacement
I replaced it with YOSHIMURA's Exhaust System to see if it would have some effect. I was surprised to find that the overall acceleration was smoother and more effective. View detail
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
Protection Seat
If you are going to buy SeatBack, you may know that the first thing you should do is to copy the protective Seat pattern.
It would be good, if the Tail cowl is damaged, etc., and you need to replace or
When applying the protective Seat from the beginning, it may fail.
For your reference, here are some photos.
View detail
Cool?
For XSR (For SEA BASS GSX) I bought it because the color was Red and the design was good for Parenthesis. I tried to put it on anyway, and it went on surprisingly well. However, the two edges on both ends are angled, so they might come off. But I was satisfied with it in my own way, so I am glad. View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
It became a little Fashion.
The purpose of the parts is to make the Indicator Lamp easier to see. Of course it has that effect, but I think there is a little change in aerodynamics.
I feel strong wind pressure when I reach about 100 km/h at high speed. After installing this Visor, I felt it was reduced a little.
I recommend it to anyone who wants to do a little something better.
View detail
Normal for a Ratchet.
For some reason I didn't have a Ratchet in this shape, so I bought one.
Those who want to turn the machine in fine steps in a deft manner may find it a little lacking.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail