Reviews
Fits: Others RCSClutch master cylinder
Note that Wiring is weak.
The size is very small, but the wiring is very weak. I wish the wiring part could be reinforced with a plate or something. View detail
Fits: Others Radial brake master cylinder
Loved the look of it.
Clutch Side and purchased at the time
Quantity:Pair (for Left and Right) I liked the same look and feel of the product sold at
I think it would be better for everyone if the instructions were a little easier to understand.
If you understand the structure of the Switch, you can install it without any problem.
I don't know how much longer RACING's Switch will be on sale, but Quantity:Pair (for Left and Right) I am very grateful that it looks the same in
View detail
Fits: Others Radial clutch master cylinder
It doesn't have to be.
I just used Hydraulic Switch on brembo and it still broke!
I was using it with a short circuit, but the Brake Side also stopped responding, so I decided to use the Quantity:Pair (for Left and Right) I bought it because KOHKEN's was the best quality for the product I was looking for.
If you understand the structure of the Switch, Wiring, etc., you can install it without any problem.
If you don't have the ability to understand it, don't buy it.
The manual is not easy to read, but I will basically ignore it and assemble it.
It seems to have Omron's WaterproofSwitch on it, so I think it's reliable.
View detail
Fits: Others RCSClutch master cylinder
It's expensive stuff!
(Large tear) For the first time in years, I had to get out the Soldering iron and install it! My hands were shaking and I melted the plastic part! To top it all off, it also made contact with the Mirror cover and left a mark! It's the worst.
Now, if you're asking me if I'd recommend it to a friend... I'm annoyed at the inconsistency of having to use it, even if I have to fix it, because if it doesn't come with brembo oem, it's the only way to go!
View detail
Fits: Others Radial brake master cylinder
It is easy to install.
I installed this on my RSV4 RF when I replaced it with a brembo radial pump master cylinder.
Some wiring is required for installation, but if you can do basic bullet terminal processing, you can install it without any problem. 。
In the case of RSV4, one of the three switch wires (maybe Black wire?) is not used. I cut it short and insulate it.
It's easy to fine-tune the Switch position, and once you do, it rarely gaps.
If you choose Mechanical's Switch for Brembo master, I recommend this Switch.
View detail
Fits: Others RCSClutch master cylinder
You need this Parts for bremboClutch on CB1300!
It looks like I need this Part for the Clutch lever, but I'm a little nervous because I can see the Bracket and
The price seems high.
View detail
Fits: Others Radial brake master cylinder
No problems after installation
Brembo master is new to me, so I needed to get a lot of stuff for it, Mirror Holder, Brake switch, MirrorConversion Adapter, and Banjo bolt, brembo has a Screw Pitch of 1mm, and the Switch itself is what I can use it with no problems, it's just that the Switch alone costs $6,500 And after adjusting Lever, the Switch side needs to be checked as well It is annoying because it leads to the damage of Switch when I forget to do this View detail
Fits: Others RCSClutch master cylinder
No good
The look and installation was good, but after installation, the Switch snapped from the base immediately
The price is not worth it for this quality
I wasted a lot of money
View detail
Fits: Others RCSClutch master cylinder
Connection part is weak
I had disconnected from the root of Wiring that I was out of the Switch unexpectedly when I was hanging Lever when changing Handlebar after installing. It is structurally unrepairable. Handling requires careful attention. Since it is not a moving part in normal use, there is no problem. View detail
Fits: Others Radial brake master cylinder
Price is Neck
I installed it on the Radial master of ADELIN Manufacturer
Although it is somewhat confusing, it is the same diameter as FRANDO's Push rod Pivot, but in the simple disassembly it can not remove Pivot,
Apparently it seems I have to disassemble up to Piston.
In this time, we did not disassemble so far and cut the PushPlate fixing hole of SwitchBody with Leutor and dealt with diameter expansion Large.
There is no problem with operation. Is it durable after that?.
View detail
Fits: Others Radial clutch master cylinder
Can be mounted on file-7NB
I attached it to 7 NB Radon Pon of Flanders. For installation it is necessary to have Koyken LYNX Push Rod Pivot for Brembo Radial Master. (Sold separately) The picture is seen from the bottom side of the Clutch side. View detail
Fits: Others RCSClutch master cylinder
Simple is good.
It is the same feeling that it is exclusively good. Installation is also easy because it just tightens with Nut removed and pinched. Just because the lines etc are exposed, it would have been better if you protected them with Tube etc.. View detail
Fits: Others Radial clutch master cylinder
Would not it be cheaper a bit more?
【What made you decide the purchase?】
Fland - 7 NB Radial master cylinder Left Side (for Clutch) I bought it to install MechanicalSwitch.
【How was it actually used?】
Safety mechanism works like OEM.
【Was it difficult to install? (Hard parts case)】
Easy to do according to installation Instruction Manual.
【Please tell me the point of installation and hang (in the case of Hard parts)】
In order to attach MechanicalSwitch to the Radarphone of Flanders, Koken's for Brembo Radial MasterPush rod Pivot (Material : We need to use Stainless Steel.
[Is there anything I was disappointed about?]
None.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Would not it be cheaper a bit more?
【Have you compared items?】
In order to attach a MechanicalSwitch to the Radarphone Clutch of Flanders, there is no choice as to only use this Switch.
View detail
Fits: Others Radial brake master cylinder
KOHKEN for Brembo Radial MasterMechanicalSwitch kit
For Brembo, but with Koken Push rod Pivot
Frando flandau : I attached it to the 7NB-19R Radial master cylinder.
I examined what it is possible to install with Net, but it was possible to install it like a special item.
Because it is an unexpected usage, it is natural on your own responsibility.
Hydraulic switch was attached to Master cylinder, but Mechanical Switch
I was looking for them.. It was easy to install and adjust, I am very happy.
View detail
Fits: Others Radial clutch master cylinder
Mechanical Switch Kit for Brembo Radial Master Cylinder
It is 5 years old, but Trouble has never been used now. Instruction manual was easy to understand with photos and it was possible to install without problems. Crimp terminal should be crimped to the tip of Wiring, so it would be nice to have a Crimp Tool. View detail
Fits: Others Radial brake master cylinder
It changed from hydraulic type.
Because the hydraulic type broke down unexpectedly, I replaced it to Mechanical.
It's very easy to install.
Those who are not confident, I think that it will be fine if you work with the MASTER removed.
Since construction is simple and straightforward, even if it should fail in any case, it seems to be able to repair on its own.
In this regard, I felt it was Large Merit compared with hydraulic type. (Both types can not be expected for durability - - - )
I can not compare because I have never used other Manufacturer in Mechanical,
If someone is lost depending on whether it is hydraulic or mechanical, I definitely recommend Mechanical.
View detail
Fits: Others RCSClutch master cylinder
If it is the direction which considers the purchase of the brembo, I think that you know, but since the MASTER is a Racing type, the Brake switch is not attached. In order to use it on the public road, a Brake switch is certainly needed. Although th
If it is the direction which considers the purchase of the brembo, I think that you know, but since the MASTER is a Racing type, the Brake switch is not attached.
In order to use it on the
public road, a Brake switch is certainly needed.
Although the Brake switch is put on the market from several companies, it is an impression which does not have an honest big difference.
If it purchases by the
price, a reliable brand name, etc., I will think that it is satisfactory.
As a reason for having chosen
Cau Ken, it is the main reasons that it is an agency of a brembo.
Although it was used and one year has passed, there is also no fault and durability is good!
View detail