Reviews
Active Tail Tidy
Instructions in Japanese only, but the pics were enough to get by. Probably easier since I already fitted an R&G Tail Tidy that was s shocker in terms of leaving all of the wiring exposed and vibrated uncontrollably due to the single flat plate design. Don’t get an R&G for your H2 SX or SX SE!! The Active eliminator is so so much better. And has a proper plug for the number plate light...shame I cut mine off to fit the R&G eliminator!!! This product fits well, looks great and doesn’t vibrate!!! View detail
H2 SX SE - ACTIVE Fender Eliminator
I fitted an R&G eliminator that cost me over $200 and although it fitted ok, it was essentially just a set of two flat plates that had no cover for electricals. So I had to tape up all of the wiring and was very untidy. The worst was yet to come as the flat plates vibrated terribly. Never happy with the set up!! So I decided to try the Active Tail Tidy. Besides getting instructions in only Japanese, the pictures helped a little and the kit fitted really well and it protects and neatly hides all of wiring, (that took me over 30min to strip off the special waterproof tape I used for the R&G kit). Additionally, the R&G kit had different connectors so I had to cut off the bikes original tail light connector, and guess what... the Active kit had the correct connector!!! So it was a shame that I cut off the original as now I’ve got shitty connectors to fit a great kit. I found that the panniers are now touching the indicators, but I’m going to have a go at bending the side plates slightly forward that should fix this issue easily enough. Stay away from an R$G and get an Active kit !!! View detail
so-so
With the help of a friend, I managed to install it, but it was difficult to do so on my own
Also, I wish I had put a Reflector on it, because Sticker doesn't go in
Because there is no Plate frame, the Plate bends quickly
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
It was a product as expected.
There are several Fender Eliminators of H2SXSE, but in my case Fitting, Number and Blinker interfere with Fender Eliminator in connection with wearing the GIVI Top case, so existing products are irritating right…
Since it was made ACTIVE made at the time of 14R, I purchased it because I got out waiting for commercialization from ACTIVE.
The fitting feeling is as expected, Blinker changed to Slim type, so GIVIFitting did not interfere Limit and was satisfying Large.
In the manual "OEMPannier impossible" Is there a ...
If it really can not be installed it may be better to include it in webike's item description.
I am irresponsible as Pannier pear.
View detail
It does not match the LED Blinker of MT-09 OEMOption
Looks like OEMOption's LED Blinker and the root 1. About 5 cm hidden by Number,
The LED part is also hidden.
Although there is no problem in practical use, the automobile inspection will not pass.
Whether you extend the length with Spacer,
Return to STD Blinker,
Do you want to find another Blinker ...
View detail
Silhouette will be better
As a matter of fact there are not many people who want to get close to Race cars even if they ride a little on the SS?
I do not like the back of the OEM.
So I bought this item.
Stable Active made and installation was possible without problem.
I thought that it looked a little like a Race car!
This item Reflector is sold separately so do not forget to purchase!
View detail
Instruction Manual is unkind
There is no problem at all in terms of function. I prefer a sleeping angle of Number a little more, but because it is Japanese Vehicle Inspection Correspondence, it is a way we can not help it.
Installation struggled. If you do not pay attention to the installation and assembly of License Plate Light, I think that it will take time. I think it would be good if you could kindly create the Instruction Manual.
View detail
So ...
Installation can be done relatively easily by following the Instruction Manual. However, since SS's Motorcycle must be Rose all around Rear in any Manufacturer's Fender Eliminator, it may take quite a lot of work if you are not familiar. View detail
I refreshed very much!
It was very refreshing and it became even cooler!
I think installation is easy except for Blinker.
The installation of Blinker was very difficult and it took quite a while.
I did not understand well that Instruction Manual was only written quite easily.
There are people who are giving way to do it by Net so I think that you can work without problems if you refer.
View detail
I had trouble installing Blinker
I'm very pleased with the items on the Image street.
As Blinker could not fit along with the rattling-prevention Rubber according to the Instruction Manual, it is reversed to the contents as described.
There was absolutely no problem except for habit of installing Rubber.
View detail
I think that it is like this
We installed in L7GSX-R. Originally the shape of the installation site changed a bit, so Manufacturer side saw a sense of hardship. I think that it would have been better if the shape was a little more narrowed the width of Blinker. But compared with NORMAL, I think that it will become SMART and fit in Compact. View detail
Rear Clear! Parenthesis エ エ
I feel a little expensive, but I was satisfied when I saw around Rear after installation!
LED can also be installed with no need for processing such as connector exchange with a good feeling.
Parenthesis is Ee
View detail
Price is high for making!
The tail is too ugly and there is little function as Fender, so remove it!
The Kit for GSX-R 1100 M bought over 20 years ago was a miscellaneous work just bent a thick Aluminum board, but this shape was painted well, but from the making it is 10,000 yen I think that the degree is reasonable.
Although there is no problem in mounting, since the attached License Plate Light is too close to Number and unevenness occurs in the irradiation range, I would like to devise a little more attachment angle and distance.
Also, if possible, License Plate Light (Like Reflector) I treated it as an OP and usually wanted to use OEM and measure Reduction in cost!
In addition, because of Reduction in cost, Reflector diverted OEM.
View detail
Appearance Refreshing
I managed to install it even by myself servicing himself.
I am satisfied with a tight feeling.
View detail
LED is beautiful. Appearance Refreshing. Visibility Up.
Purchased for the purpose of Slim appearance.
However, due to the brightness of the LED, the visibility from the rear due to the height of the installation position Up, the scare feeling behind the car dropped by Large.
I feel relieved.
Installation is not difficult, but in the process of adjusting the position and final tightening from the temporary stop, it is rather difficult to insert the tool from the temporary assembling gap, the work was quite severe.
When final tightening, whether to remove the temporary work once, whether to put a tool in the gap, such as.
However, once you have decided the position, it does not matter so much, so overall satisfaction is quite high.
View detail
Only the mounting order...
Although it proceeded as instructed, blinker and License Plate Light 's Wiring processing was done and the temporarily assembled one was replaced by Rose. It was hard to process because the notch for passing Body's Wiring is Small.. Were you familiar with it, did it correspond to it by cutting away notches in advance? Maintenance It was awkward to me of amateur.
The accuracy of the parts of Others was high, I thought that it was Mr. Active.
View detail
It is Well, Refreshing.
Anyway I wanted to remove Normal fender like shippo I bought it
Japanese Vehicle Inspection Correspondence, Rear Refreshing
Since the LED License Plate Lamp has a Connector, it will not be reversed
Reflector is sold separately! It does not correspond to Japanese Vehicle Inspection. is
There is no problem if you do according to the instructions "Installation" I think that I can do it. "attachment" Ha!
Then what is the problem is Normal fender removal!
The dismounting of Cowl of SS is truly Mendoi!
Also, although it is also written in the manual "Block CowlInner's hole with Tape" There is a
It seems like luxury, but this is also the place I want Plate to cover.
View detail
It is good except for Reflector.
I thought of COSPA and made it ACTIVE.
Installation was also no problem, but because I do not like the shape of Reflector, I purchased separately.
If you change to the shape of DAYTONA, it will be more expensive.
View detail
It is quite good feeling
I am solidly synthesized..
The making of each Parts is also beautifully finished..
It is good to have Coupler and fine BlinkerWasherParts.
License Plate Light's LED is a bit disappointing.
Regrettably, the fabrication of the Bracket division is regrettable.
I feel it's expensive a little !?.
View detail
As expected it is ACTIVE.
License Plate Light with Black tone LED and R6's ass is Parenthesis better. If you do not put Reflector separately, Reflector is also perfect with choice of Small Shime. View detail