Reviews
watchman
The rear area has been refreshed and looks great. Reflector needs to be prepared separately. View detail
cheap
Fender Eliminator from ksStyle was not available, so we substituted it here
The number angle is a little loose, so if you want to raise the number angle precisely, use another manufacturer's number angle.
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
Not compatible with Pannier case.
I looked at the price and bought it because it was cheaper than the Puch and it would pass inspection (some people say it won't pass because the Number standards have changed …). The installation process was easy to understand because the Instruction Manual was enclosed. (I might introduce it on myGarage too.) When I tried to install the H2sx OEM blinker, it was not possible to install the Pannier case, so I bought the Active blinker and installed it including the press-up which took a little time. If you want to use it with Pannier case, I think you have to spend a little bit of money or DIY. However, I am glad I installed it because the Rear Fender area is very refreshing! View detail
Is the thing with many components removed variously only a KAWASAKI vehicle?
Is the thing with many components removed variously only a KAWASAKI vehicle? View detail
Even if it was attached simply and you carry out what time contribution, tell the reason for a send-off!
Even if it was attached simply and you carry out what time contribution, tell the reason for a send-off! View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
Since the price was cheap, this was chosen, but structure is also very solid and he is smart. Although it had written that a tail cowl was removed, attachment was able to be attached even if not removed. However, it is although workability was not
Since the price was cheap, this was chosen, but structure is also very solid and he is smart.
Although it had written that a tail cowl was removed, attachment was able to be attached even if not removed.
However, it is although workability was not good and being carried out.
Although wiring of the number LGT is a plug terminal, the thing of attachment to a kit is an easy thing which can be attached without a press-fit tool.
Since it was disagreeable to have damaged the original wiring, a plug terminal was bought, it was stuck by pressure and I connected.
View detail
customize your 750 zephyr
Hello
I love my 750 heritage and I wanted to remove this ugly plastic mudguard I wanted to buy it on a French site but I tried direct from Japan and a week later I had it ------------- --------------------------------------------- Hello I love my 750 Heritage and I wanted to delete this ugly plastic mudguard I wanted to buy the French site but I tried direct japan and a week later I had it Powered by Google Translator
View detail
Refreshing?
I was looking for a Fender Eliminator Kit, as the presence of Fender made it somewhat less Sharp. I looked at several companies, but chose Active based on cost and design. The installation was easy, but the preparation before the installation was quite large and strange, and it was a little difficult to understand because the Instruction Manual was in white and black. I managed to complete the work without any problems, and the removal of the fender gave it a refreshing and sharper look. View detail
ACTIVE Active Fender Eliminator Kit
To give the Rear area a Refreshing look, we replaced it with a Fender Eliminator Kit.
Mud splatter may be worse, but we prioritized appearance.
Among the Fender Eliminator Kits, I chose ACTIVE for its appearance and quality, and so far I am very happy with it.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Active fender eliminator kit
Fast delivery, item was packed safely and arrive in good condition, Really recommend you guys to order from here, Thank you guys! View detail
Fits: KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400
Refreshing
The quality is good and installation is easy.
If you are going to make it a Blinker reply in the future, the look of this Kit with the Blinker Bracket still in place may not look so good.
View detail
Fender Eliminator
I used it on my GROM. The number was not as high as I thought it would be, but it's not a problem at all. View detail
It's hard for a complete amateur...
I installed it on my BMW S1000R 2018.
This is my impression of the installation as a complete novice in electrical systems, wiring, etc.
I tried to install it, thinking it would be possible since there is an instruction manual. I thought it might be possible and tried to install it, but I gave up at the last part, Wiring, because the explanation of the detailed part was too general. (´-ω-`) .... I had a friend who knows a lot about machines help me. 。
I'm very satisfied with the design and texture! The design and texture are very satisfying. 5 stars if you can provide more details about the wiring.
View detail
Fits: KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400
Rear Area Refreshing
[How is it used?
I had a Ninja 400 and a thick Fender in the way.
Was the installation difficult?
There is an instruction manual for installation, so the difficulty level is low, but if you don't have any knowledge about the electrical components, please study it thoroughly or leave it to the shop.
How was your experience with it?
Refreshing around the rear. The angle is not too violent, so it is good for people who do not like too vulgar Number installation.
Tail lamp gets very dirty, so please wash your car frequently.
[Included Parts:were they on?
It came with everything.
[Was there anything that disappointed you?
It's a bit expensive.
[Note]
If you don't buy Reflector (sold separately), you can't drive on public road.
View detail
The simplest construction among the things that can be attached to the GSX-R.
Product Name
ACTIVE Active Fender Eliminator Kit
Item Number
1155040
Vehicles
GSX-R1000R 2017
Number of man-hours
About 30 minutes
Why did you choose this product?
I bought it because I thought the OEM Fender was too large and I thought the whole body would be cooler with a lesser design.
Impressions after using it
The product is as expected, both good and bad.
Product Contents is a simple product, so there was no difficulty about installation.
If I had to say, it's not a messy design, so it's easy to blend in with the vehicle.
For myself, I prefer a matte surface finish.
Also, this is the fate of the Fender Eliminator.
When this product is installed, the back gets dirty well because it bounces up badly in the rain.
▼ Attention
It takes the exterior around Seat to install, so if you are not confident about the work, it is better to ask PRO.
View detail
For the Tire replacement!
ZX-6R (2016) I've installed it on!
The reason for this is because I started competing in Race classes with numbers and the frequency of tire changes went up and I got tired of the OEM Fender getting in the way every time lol.
The replacement process was almost effortless, and even I, who had never even removed a RearCowl before, was able to finish the job in about 2 hours!
There are many Reviews on the look and feel of this site, so the required tools and OEMFender removal instructions that are not in the Instruction Manual. (Not surprisingly, it's not listed anywhere) I'm going to write briefly about what I wanted to know before I bought it, OthersSmall stuff, etc.
Minimum tools required
On-board tools
(5mm and 4mmHexagonal Wrench, Phillips Screwdriver, 10mmWrench)
10mm Socket and something that can turn it
(50mm Extension&Ratchet wrench or Tren etc.)
Nipperor Powerful Scissors
Useful tools to have
・Radio pliers
・Electric Works Pliers
5mm and 4mm Hex
Arm strength
OEMFender Removal Instructions
Remove RearSeat
? Remove both Side cowl
Remove the Seat
Remove the RearPanel
Remove the LeftRearCowl.
Remove the Connector that was hidden in the LeftRearCowl.
(3 Wirings that are missing towards Fender)
Remove the 4 bolts that are fixing the Fender from under the Rear Seat.
completion
Others
Cowl is connected by a lot of nails, so please be careful not to break it.
You might want to take a look at the YouTubers!
The removal and installation of the Blinker is the most difficult part.
The way to remove it is simple enough to see, but it's hard anyway!
(It took me a little over an hour of my two hours to do this).
It is easy to remove by twisting after removing the two gold plates.
The installation is something of a spirit, good luck!
Electric Works Pliers is required to make a connector for License Plate Light.
(Because of the crimped terminals)
If you don't have one, please cut off the OEM connector part and connect it using the included Electro Tap.
Electro Tap is not very durable, so buy or borrow some Electric Works Pliers and make a Connector somehow!
that's all
I hope that helps in some way!
View detail
Can be installed on the 2021 model year with a little modification.
The grace period for the new number angle standard has been extended until October 1, so I bought this 45-degree version instead of the 40-degree DAYTONA.
The following two modifications are required for the 2021 model year.
1.The hole of the base plate is small and the Coupler of Blinker cannot pass through.
→Wiring is cut in the middle, and after passing through the hole, it is converted to Bullet Terminal and reconnected.
2.The coupler of License Plate Light is female, and the body side is also female, and it cannot be connected.
→OEM Wiring with TAB coupler is Cut, Bullet Terminalized and reused.
It can be installed without any problem with the above two modifications.
After all, Fender Eliminator is better for Parenthesis if it sleeps to some extent.:5pcs.
Because there is a hole and a gap considerably afterwards, some Waterproof measures may be necessary. It is a little troublesome.
View detail
Fender Eliminator Kit of Japanese Vehicle Inspection Correspondence
Installed on a GSX-R1000R 2019
I installed it the day I took delivery of my car.
I remember that the work was not so difficult to say, but it may be a burden for the person who is not familiar with it because Cowl removal around Rear is necessary.
The quality of things is good for the price.
I mean, even though the finish is beautiful, it's a bit pricey for a combination of board gold bent…
In addition, the angle of the license plate is firmly fixed as it is named "Japanese Vehicle Inspection Correspondence".
It is not possible to raise the Pushing by bending the root, so if you want to raise the Pushing, you need a little ingenuity.
The Neck of the most Large of this product is that the multiple holes that are exposed by removing the Tail cowl of the NORMAL are left intact.
I made full use of Black Gum Tape and Sponges to seal it, but you need to be careful because the inside of the Tail cowl will be dirty if you don't do something about it.
Also, if you don't need the root of the OEM blinker, such as the License Plate Holder with Active Blinker, you can buy parts without this part for about 1000 yen.
However, the license plate holder with active blinker cannot be used on the R1000 after L7 because the blinker voltage is special. (Resistance required) Please note that due to the
View detail
It's nice
We replaced OEMTailCut with Trust Active products.
I've Refreshing quite a bit from the 1100 yabbiness.
However, at the time of installation, the OEM Small Case did not fit and I had to turn the Wiring back several times.
It took me a while to get there.
But I am satisfied with the design because it is Parenthesis good.
View detail
ได้รับสินค้าตามรูปแบบครบตามจำนวน แพ๊คมาอย่างดี สมบูรณ์ไม่มีรอยขีดข่วน ถึงตามเวลาที่กำหนด View detail