Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Reinforced Belt Series Made In Japan Clear all

KN Planning

07 Jul 2022

Reinforced Belt Series Made In Japan

Fits: HONDA clair-scoopy, HONDA Gyro UP, HONDA Gyro UP, HONDA gyro X, HONDA gyro canopy, HONDA Johno., HONDA Journo Clare, HONDA SmartDio, HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA TODAY., HONDA Livdio ZX, HONDA Gyro UP, HONDA gyro canopy, HONDA SmartDio, HONDA SmartDio, HONDA byte

Japanese Webike user

2/5

Unsure how long it will last as I don't trust the quality.

I decided to replace the Belt, Pulley, and Clutch because I have no idea how the drivetrain has been taken care of on a used car with unknown mileage.

The arrows are marked, so be careful of the direction when replacing.
When the belt cannot be attached, the clutch can be widened to allow the belt to drop down and rest on the shaft on the pulley side.

Even with a reasonable one, the speed is normal because it is new.
I don't trust this Manufacturer's products now, so I will use something else the next time I replace it. View detail

KN Planning

13 Nov 2021

Reinforced Belt Series Made In Japan

Fits: HONDA eve (esp. Christmas Eve), HONDA gyro X, HONDA Julio., HONDA Johno., HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA baton, HONDA baton, HONDA baton, HONDA baton, HONDA baton, HONDA diocesan, HONDA DJ-1, HONDA DJ-1, HONDA livudio, HONDA baton, HONDA baton, HONDA baton, HONDA Gyro UP

NO NAME

5/5

KN 7011

Belt. A little longer than the original, somewhere 653 and width_ & 15.4 - with a daytona variator on the bushing it lay perfectly! // put on Honda tact AF: 30 I recommend. Dolgo chose between the belt -_dayton ₽ and this = Before that, there was a massimo (101) / also a good lane. I will order more! @ take you will not regret it. Kevlar nah, needed) Belt. A little longer than the original, somewhere 653 and width_ & 15.4 - with a daytona variator on the bushing, it fits perfectly! // put on Honda tact AF: 30 I recommend. Dolgo chose between belt -_dayton ₽ and this = Before that, there was massimo (101) / also lane is good. I will order more! @ take you will not regret it. Kevlar nah, needed) View detail

Reinforced Belt Series Made In Japan For JOG Series

KN Planning

13 May 2020

Reinforced Belt Series Made In Japan For JOG Series

Fits: YAMAHA Axis 90, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog 90, YAMAHA Axis 50, YAMAHA Apprio, YAMAHA Jog Z, YAMAHA Jog Z, YAMAHA Apprio, YAMAHA JOG (5KN1|2), YAMAHA JOG (5BM1), YAMAHA Vino (2-stroke), YAMAHA Super Jog Z, YAMAHA jogpochet, YAMAHA jog sports, YAMAHA Jog Aprio Type 2, YAMAHA Jog ZII

Japan User(translated)

4/5

Recommended for people who want to have a bit of extension at high speed

Long type is used for SA16J Second Type Model

The start is a little more mild compared to the OEM, but with the combination of high prep and external CDI, it is a high speed car In my case, it was about 5km/h faster than the OEM Belt under the same conditions In my case, I improved about 5km/h under the same conditions compared to the OEM Belt

It has been two years and 5,000 km since purchase, but no cracks, etc., deterioration has not occurred View detail

KN Planning

23 May 2018

Reinforced Belt Series Made In Japan

Irina

5/5

KN Planning

A good belt 34 dio-width 17 mm. the quality is excellent* the original expensive the price is acceptable /for aluminum pulleys suitable* and SX Honda 35 recommend looks good and hatin more than the old one! View detail

KN Planning

02 Dec 2017

Reinforced Belt Series Made In Japan For JOG Series

Japan User(translated)

5/5

Good product in all

Vino (5AUA SA10J) We mounted on.
I bought Long Type.
Length 810 mm. Width 16. 5 mm. Cog height 7 mm.
OEM Length 799 mm. Width 16. 5 mm.
It is the Length pulled to the outermost circumference of the Large diameter Pulley of Company K's Power drive.
It is kind to be able to understand the mounting direction on the Belt surface.
We reduced the opening degree of Axel and made a break-in operation for 100 kilometers.
I saw Belt after the break-in run, but no abnormality was found.
As of now it has good slip and no noise.
I have used P company's RACINGBelt for many years, but Belt from KN project is also very good.
It is a product that I want to prepare another pc for Spare.
View detail

KN Planning

13 Jan 2017

Reinforced Belt Series Made In Japan

SpringUp

4/5

KN Planning Reinforced Drive V Belt 7011-SS Compatible with HONDA DIO-LIVE ZX AF34 good durable Help in better speed and more speed.

KN Planning Reinforced Drive V Belt 7011-SS Compatible with HONDA DIO-LIVE ZX AF34 good durable Help in better speed and more speed. View detail

KN Planning

27 May 2016

Reinforced Belt Series Made In Japan

Japan User(translated)

5/5

The fastest speed - - -

The maximum speed of DIOFIT used for commuting has fallen, so purchase. It's truly an exchange if you are running 10,000 kilometers. After swapping, also the fastest speed. Large satisfied! I will also buy it on next exchange. View detail

KN Planning

14 Feb 2016

Reinforced Belt Series Made In Japan For JOG Series

Japan User(translated)

3/5

It becomes a high-speed type.....

Although it becomes a high speed type, in Engineering Bore Up Kit, engine maximum rotation speed is slightly lower than Belt of OEM Length! Intake system, exhaust type etc.. If you do not fight, it seems difficult for LongBelt to show off.

But even if the maximum speed drops slightly, Belt is in a high speed type, so it is slight, but the maximum speed will rise. View detail

KN Planning

24 May 2013

Reinforced Belt Series Made In Japan For JOG Series

Japan User(translated)

4/5

although various things called strengthening Belt used for APRIO type 2 tried, die length is good exactly and acceleration is also smooth -- since only one is still used, the individual specificity of die length is not known. I think that it excels in the Cost performance since Belt width does not have a limit yet, either, although about 10,000 km is used. One more was purchased as a reserve this time. View detail

KN Planning

18 May 2012

Reinforced Belt Series Made In Japan For JOG Series

Japan User(translated)

3/5

One flat knot went out during the run. When checking
2 flat knot, it had exfoliated. Since the
Pulley had a crack, it may be that it is the cause. Since
3 flat knot changed the Pulley to the new article, it is looking at the situation.
However, the DAYTONA and the Belt of NTB had no damage also at the Pulley with a crack. If there is a thing of a Long type, I would like to purchase things other than KN, if
real intention is said. View detail

KN Planning

08 May 2012

Reinforced Belt Series Made In Japan

Japan User(translated)

3/5

[Webike Monitor] exchange needs to remove a Pulley and a Clutch. The specialized tool for removing and a certain device is required. It cannot turn by a Wrench then. durability is expected.

[Webike Monitor]
exchange needs to remove a Pulley and a Clutch.
The specialized tool for removing and a certain device is required. It cannot turn by a Wrench then.
durability is expected. View detail

KN Planning

14 Apr 2012

Reinforced Belt Series Made In Japan For JOG Series

Japan User(translated)

4/5

[Webike Monitor]
It is used for an AXIS 90. Since he wanted the Belt of a different size from the Belt of K company of the
stock, it purchases. Since it is not the size which he wanted if
acquisition is carried out and it measures, it is cancellation for the time being. Although
other company is also so, it will be saved if there is a display of the size of a Belt. In
quality, it is satisfactory. View detail

KN Planning

16 Jan 2012

Reinforced Belt Series Made In Japan For JOG Series

Japan User(translated)

3/5

Since the belt of the aprio was cracking, it exchanges.
A start dash and acceleration have been improved after exchange.
However, all the time, if it is running with the sufficient tune, heat Darre will be woken up gradually.
It is the shin without being pleasant even if he has a feeling which the drive-line is not committing at all and it is running when heat Darre is woken up.
What is necessary is just to obstruct heat Darre to a slight degree. View detail

KN Planning

13 Oct 2011

Reinforced Belt Series Made In Japan

Maksim

5/5

good size 15.3x652 I installed it on my Honda dio af27 I like its qualitative characteristics and dynamics of the scooter

good size 15.3x652 I installed it on my Honda dio af27 I like its qualitative characteristics and dynamics of the scooter View detail

KN Planning

13 Oct 2011

Reinforced Belt Series Made In Japan

Anonymous

5/5

good quality The size of 15.3x652 I installed it on my honda dio af27, I like the quality and characteristics of the belt.

good quality The size of 15.3x652 I installed it on my honda dio af27, I like the quality and characteristics of the belt. View detail

KN Planning

22 Mar 2011

Reinforced Belt Series Made In Japan

Japan User(translated)

2/5

Compared with an overseas article, it is a little high.
Although it did not understand whether it was how much strengthening, the moped which was the maximum high speed of 48 K until now was recovered to the maximum high-speed over of 60 K.
I would like to be cautious of a speeding offense from now on more than former.
Since it was unknown, the star was dropped for in between [ what ] such a maximum high speed comes out of the rest.
What is necessary is just to have about 5000 K. View detail