Reviews
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
KEIHIN Jet needle
Stable KEIHIN Jet needle.
I am satisfied with the quality.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
The packaging is too messy for the shipping!
I thought the shipping cost was high for the parts, but since they are precision parts, I thought they were carefully packaged, but they sent the products in a Vinyl bag with no cushioning material and a single paper bag, which was a big surprise.
I can only hope that there are no deficiencies, but I am anxious and displeased.
The product may be trivial, but the buyer should be aware once again that he/she is paying a Gold for the product.
That's all
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
Essential for FCR Carburetor BodySetting
Used for setting FCR Carburetor Body.
This is a companion for the long road of Setting from now on.
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
It worked fine
It is no different from the one before the replacement, and I am using it with no problems at all. View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
I bought an EFN and received EMS, and when I requested an exchange, I received EMS again!
I received the wrong item and then the wrong item again.
The other thing that bothered me was that the Needle made of Brass was not handled well and was quite corroded, although I am not sure if it was put in by someone with a lot of hand oil.
I am concerned even if the correct product is delivered because the product cannot be polished by Compound due to its precision.
First of all, I want you to send me the correct product immediately.
View detail
For CRBig body
As this is the first time to set up CR Big body, I purchased 51 series Needle from 5177 to 5179 as a standard number. Unlike Small body, needles are not common at all, so I bought Needle for the first time in a while.
In the case of KEIHIN's Carburetor, it is easier to buy all the setting parts at once once once you have identified a large number of hands that you think you will need.
Both Slow Jet and Jet Needle are easy to set up because you can clearly feel the change at the first turn. I feel that the range of setting parts that I have is more important than Mikuni. (Of course, I need Mikuni, too...)
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
In fcr mx 37 Setting.
I have several types of fcr mx with different Straight diameter for seasonal setting. fcr has many consumable parts including main nozzle and floating valve, so I replace them regularly. View detail
Keihin Parts
Great purchase, parts are as ordered and discribed, prompt delivery, Good to deal with, will purchase from again. Thank you A+ View detail
In cr26Carburetor.
I bought this for cr26Carburetor Setting. View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
You'll never know until you change it.
Mounted on SingleFCR Carburetor Body28.
I bought a used fcr28. After finishing the provisional setting, I was able to get a good feel for the actual driving.
However, I decided to change the Needle to make it a little more ideal fee ring.
It's not ideal yet, but it's looking good.
I'm still going to need a few Needles (sweat).
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Solving a problem?
Used in setting of single, fcr28/H.
Selection of Large rough Jet number to be used was completed for both PJ and MJ.
As you proceed with Setting, the number of Clip steps goes back and forth between the first and second steps from the top…
If this continues, there may be no end in sight for the Needle tier? (LOL)
Start Setting again with another Needle, and
It's looking good, so I'm going to try to fill it up even more…
However, I also wanted this Needle, which I didn't have on hand, so I bought it.
I still think it's better to have several Needles.
I've changed the needle and it's a temporary setting, but I'm on the third level now.
I have two more steps to go, so I'm not too worried? (Laughs)
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
I couldn't get a Setting out in the end, but …
Purchased OCEMT for setting up FCR Carburetor Body41 on SR400.
With the standard OCEMS, the plug burn was too thick at 1/8th, and when I thinned the 1/8th by adjusting the Clip step + Throw, it caught at 3/4th, resulting in poor acceleration. Therefore, I decided to buy an OCEMT with a larger Straight diameter just to make 1/8 thinner.
Even a slight difference in thickness of 0.01mm makes quite a difference when compared to OCEMS.
When I installed it, I thought it would be Large sturdy. Ugh, that's so thin!"
The bottom is obviously too thin to blow up.
I managed to get it to blow by using the number of steps, SJ, and Air Screw, but the connection did not improve much and there was continuous backfire and gasping for air. 1/8th was completely set out, so I returned to OCEMS.
To begin with, when using FCR Carburetor Body41 on SR, it seems that the bottom part of the body becomes darker when the setting is adjusted at the top, but since there is no problem when running, we decided to assume that this is how big single is like.
This is the first time I have changed the needle in my long motorcycle life, and it was a valuable experience for me to see how large a difference one rank can make. If you only want to follow the numbers on the chassis, you may want to replace the needle and set it up comprehensively, but if you have no particular problem on the street, you may not want to change it. The change is too Large.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
FCR Carburetor Body For Small MotorcycleNeedle
Setting parts for FCR Carburetor Body.
Throttle setting in the middle opening range will be affected.
It is good to have several Sizes so you can compare them, but with a 4-cylinder Motorcycle, you have to have 4 of them, which is a bit expensive.
View detail
Somehow good setting now....
Somehow good setting now.... View detail
It is selection of such Monn kana ? trial and error.
It is selection of such Monn kana ? trial and error. View detail
Setting
You'll have to buy a few different ones, but once you get the Settings right, you'll get pretty good acceleration and not bad gas mileage!
17 kilometers per liter!
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
I bought the FCR Spigot this time with a Setting change because I shortened the FCR Spigot. I think I'm getting so-so Settings. I think I have to use PRO for this one. I enjoy this setting so much that I don't leave it to PRO. View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
Thickness is important.
I use different thicknesses in summer and winter, and I think the thickness is a very important point in determining the fee ring. I think the thickness is a very important point in deciding the fee ring. As with other packing products, it's really helpful to be able to choose from the Parts List and buy immediately. View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
This time I bought it to change the Needle. If you are able to do some setting, this is a good choice, but it is not a task for amateurs. If you have an AFR meter, you can set it to some extent. View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
This is the second time I have purchased this Needle. I used it on my friend's motorcycle so I bought it for my own motorcycle.
There are many types, but if you decide on the right one, you can ride with one front and one rear for a year without any problems. Next year I want to have a PRO look at it and see how much difference it makes.
View detail