Reviews
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
One missing part was delivered
Hello, I received the product yesterday and checked it. As a result, it was delivered without pulley grease (5.0g) X1. It was delivered in good condition, but the pulley grease was missing in the photo. Please check it~ Good job ------------------------------------------------------- -------------- Hello, me check results hayeoseo yesterday received the goods, The pulley Greece (5.0g) X1 is shipped without. Shipping status, although preferably Shipping The photo shows Greek shipping pulleys were missing in the state. OK, thank you ~ work hard Powered by Google Translator View detail
Continental
"Kıtaco variator is really super, but when I put it on for the first time, I put 7 gr. It didn't happen when I put the 10 gr bags on it ------------------------------ ---------------------------- Kıtaco variator really super lonely I was when I first installed the Plug think I did not wear 7 g 10 g on the seat inserts Powered by Google Translator" View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
needed performance upgrade
i was running stock unit which was not performing well enough this setup with 6G rollers has fantastic acceleration and a massive improvement to top end speed (100kg rider in gear tops out at 80kph on flat roads with CDI upgrade) View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Accelerated start UP! Meter Perhaps 70 km / H place!
Used for Honda DUNK.
Dunk Parts is still few, and at first I attached Mukawa's High Speed ??Pulley conforming to DUNK
.
Starting and accelerating was honestly honest just because I got a little bit of growth at the maximum speed without NORMAL and Large difference.
Because there is a change in the Exhaust System, slow speed is chilling, so WR is lightly set.
Later I installed High Speed ??Pulley for ZOOMER.
I am getting better and the maximum speed is 70 km / I got up to h place, but WR, Center spring etc, how to set 30 km / Rotation falls near h and does not accelerate to Smooth.
The face is on the verge and the angle is on the way from the middle of the Ramp Plate, where a valley is created for acceleration.
Make River's Ramp Plate was straight and accelerating was also straightforward, so I tried to use the Mampakawa's Ramp Plate, but the outer diameter is Small..
So, although it can be used for DUNK, the effect was written as slight, but since Ramp Plate is Straight and its outer diameter is larger than Mukawa Pulley, purchase it as a trial.
WR 5 g × 6 pieces and center spring 5% UP (Compared to ZOOMER Center spring) With Setting.
Since I was getting upset with acceleration and acceleration was not good, I put Slider in the center spring of LIVE DIO and tried it with WR 5 g × 6 pieces.
Beginning and accelerating also improved considerably 30 km / The valley of acceleration near h disappears and it accelerates to Smooth.
The maximum speed is 70 km / I think that it is near the h.
Therefore, OEM. 5 mm long 36. WR 4 g × 3 pieces in a 5 mm boss - Test run with 5 g × 3.
Even though I get better, the acceleration is slightly worse and the maximum speed is 58 km / It fell to h.
Just climb the slopes Guyugui.
Finally 4. 5 g × 3 - Setting completed with OEM boss to 5 g × 3 pieces.
It was pretty pleasant to start 0 and I felt that I was satisfied with acceleration and also the fastest speed.
I have tried 3 types of Pulley other than OEM so far, but this Pulley is the best.
To ignore the highest speed and climb up the slopes Guyguy 0. I put up a 5 mm Shim and I climb up considerably.
For DUNK riders it is Recommendation!
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Like its rebranded kitaco lot of very good quality Like its rebranded kitaco lot of very good quality it was worth a try, then I am not disappointed Hurry, hu
Like its rebranded kitaco lot of very good quality Like its rebranded kitaco lot of very good quality it was worth a try, then I am not disappointed Hurry, hurry, do not be the first to post a few of the well.(Google Translation) View detail
I think that it is a good product of COSPA.
All including Tire OEMSpec. 15,000 km elapsed as it is.
Even a long straight road does not reach 75 km by Meter reading.
Also, was the acceleration from 0 km also lost to the original?.
As we were considering replacing expendable items such as V Belt,
Read the Webike Impression article,
Also purchasing this kit thinking that it is better to unify with the same Manufacturer.
After wearing, to habituation up to 300 km up to 50 km,
After that, I tried to confirm, but the fastest speed nearly three digits came out.
However, the highest speed is an omnibus way of thinking, rather than acceleration from 0 km,
40 / Pickup for intermediate acceleration from 50 km is improved,
I thought that it was a sleepy engine, was it a driving system problem,
I felt it again. Even in local rural commuting times,
I can now LEAD the traffic flow gradually.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Against the price [Contents] Is good
I was thinking to introduce High Speed ??Pulley for exchanging the driving system, but since the face was worn out and it was able to step up, I used it as a whole set here.
It was my first time to replace the original drive system, but I can understand the difference clearly by exchanging.
Also, because this one has all but Weight Roller, I think that it is a good deal.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
It is okay
I made a step in the OEM so I exchanged it.
Because it is not High Speed ??Pulley, I think that speed and initial speed etc. will not change.
It is okay, is not it good?.
I think COSPA is good.
View detail
Shop and goods satisfied
It was Sale time so it was very profitable to purchase and I was very satisfied with arrival in 7 hours from shipping.
The crucial impule, we 117 CC Bore PWKAir cleanerSpec. Although it was a Nomaph, I used it with Malossi, KNMania Pulley and it was one short, but this Pulley feels good to allow from bottom to top. The drop is 0. It enters only 5 mm Washer, but it is good because it is large from the original.
I also use the high rotation closed closing quite a bit and the elongation is also good feeling. 7400 rpm Phillips km Why do I have to exhaust & set you aim to aim further.
When I was in AXIS 90, the boss shaft worn out and it became useless, so it would be perfect if it took 10,000 km.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Ideal for refreshing the drive system
【What made you decide the purchase?】 I referred it such as Review
【How was it actually used?】 It is getting better and better than NORMAL
【Mounting was difficult?】 It would be better to have special tools to remove Pulley
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer - Please tell me if there are any improvement points】 No particular
【Have you compared items?】 nothing special
[Others] Ideal for refreshing the drive system
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Used for ZOOMER
I heard rumor, but Ramp Plate is sharp, so it got scratched soon.
When Weight Roller rolls about 3000 km in use, it seems that KATANA scratch of Shinichi is 1 pc each. It was beautiful..
I do not know if there is an influence on the maximum speed, but 65 km is good..
Since it is uneasy with a round Weight Roller, Dr. I made it to Pulley.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Recommendation for OEM replacement
I replaced it because there was a step in the OEM's Pulley and Drive face.
Changes were seen at medium and high speeds as well as in other people's impressions. It takes time to arrive at the highest speed, but I think that 4 to 5 km has expanded. I think that it will change with Weight's setting.
View detail
GRAND AXIS 100
Purchase to the bad acceleration of GRAND AXIS 100. OEM Engine to OEM Type Spumakh, OEMcarburetor's Axis, but it accelerated - I got better with re acceleration. WR - It may be even better if you do carburetor adjustment, but I am satisfied with the current situation. I also have Instruction Manual, but I think that knowledge is necessary to some extent because of important parts such as drive system.
View detail
I chose by Brand
GRAND AXIS 5FA 2 type that we received from acquaintance This is 2ts 100cc lag behind Big reel decided to OH 11000 kilometers Drive system I will not hesitate and I am solid in making Type - 3 OEMWeight Roller of 5FA 2 is 9, Roller attached to 5 Gram is all NORMAL so I will continue to adjust Parts that have not come yet so I will have an OH schedule as soon as it is Incidentally KITACOV BeltClutch SpringDAYTONA 3% UpCenter spring By the way the current maximum speed is 73 km in the best of flat land View detail
Because of the last Impression, from a home Impact, a Pulley Nut does not separate and it gives up. a Nut can be removed from the Impact which has a Torque somehow or other this time [ ] -- Wearing ... , even if it sees your Impression
Because of the last Impression, from a home Impact, a Pulley Nut does not separate and it gives up.
a Nut can be removed from the Impact which has a Torque somehow or other this time [
] -- Wearing ...
, even if it sees your Impression,
the maximum high speed was
extended about 10 km at most !(^^)!
-- it became, so that it obtained and the Speed of 3 figures was reached in a few, whatever it might be extended as 20 km.
-- incidentally the low speed also became good a little -- Doesn't fuel consumption probably become good, either? ...
(if it does not run by full admission) -- it has in a 125-cc Scooter now -- it is -- Ike that's right.
View detail
Or [ that I will change a drive system ] ... From , however an Impact for home use, it was (-_-) !! where the Nut of a Pulley does not separate and which has not performed wearing... Immediately after wearing being able to do, in play co
Or [ that I will change a drive system ] ... From
, however an Impact for home use, it was (-_-) !! where the Nut of a Pulley does not separate and which has not performed
wearing... Immediately after
wearing being able to do, in play contribution is carried out after a trial ride again.
(we recommend you Impact purchase with a specialized tool or a Torque)
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
[Webike Monitor] It exchanged for the original manufacturer's product. A price is also cheap and the thing was also good. Attachment was also found enough with the attached description. It is it, if the original manufacturer's product has not been
[Webike Monitor] It exchanged for the
original manufacturer's product.
A price is also cheap and the thing was also good.
Attachment was also found enough with the attached description.
It is it, if the original manufacturer's product has not been worn out since WR is not attached! Since it is up to persons, *(it changes into 5.5) WR exchanged since I was worn out is a Setting.
The maximum high speed and acceleration were easy to change!
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Since it had worn an authentic positive one out, it exchanges. acceleration became loose. It is thought that the load to the Engine decreased.
Since it had worn an authentic positive one out, it exchanges.
acceleration became loose.
It is thought that the load to the
Engine decreased.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
Since it was good touch when it was purchased and used for the yamahas JOG before, it was purchased and tried to use it for honda zoomers this time but, and probably because the engine itself was powerless, the not much good physical feeling was not made.
Since it was good touch when it was purchased and used for the yamahas JOG before, it was purchased and tried to use it for honda zoomers this time but, and probably because the engine itself was powerless, the not much good physical feeling was not made.
The acceleration feeling could also be weak at the touch which only rotation goes up, and most speedup could not be found.
Since fuel consumption only worsened, it returned to normal.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
This variator has best top speed character, acceleration not too good. With its wider surface can let streched belt still work fine and still can get high top speed. If its weight rolling surface designed with lower slope can be better for acceleration to
This variator has best top speed character, acceleration not too good. With its wider surface can let streched belt still work fine and still can get high top speed. If its weight rolling surface designed with lower slope can be better for acceleration too. Generally this variator is the best that ever made, thanks to webike too. View detail