Reviews
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
Commuter Rapid Spec.
This is the second time I have purchased High Speed Pulley.
The last one was NRMagic.
The Slide Piece shattered and damaged the inside of the piece and turned elliptically to replace it.
This time I want to use it with care.
Compared to NRMagic, it feels a little slower at the beginning of the run, but once the speed increases, it doesn't bother me.
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
Honda today af67
I bought this for my Honda today af 67 It fits perfect . With the original variator the speed It was maximum 55 now with this kitako the speed is 60 km h and on downhill it's 67 km h . It accelerate very smooth . I'm happy with this product it's a very good deal . View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
I wanted to increase the maximum speed a little bit.
I'd like to get another 5-10k. I'm going to change Pulley. So I bought it.
I tried Total33 for WR, but I'm taking my time with NORMAL weight for now.
Smooth up to 55km, but tough from there on.
If there is a tailwind or a gentle downhill, it accelerates easily to over 60, so the lack of power cannot be denied.
The balance with WROthers will be better.
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
Increased speed increased significantly
My today50 is 20000 kilometers. After replacing this product, the speed increase is not particularly obvious, but the speed increase is very obvious. Previously, the speedometer speed was the fastest at 57 on flat roads. After replacement, it can exceed 65. It is smooth and the noise is also better than before. Decrease a lot. It feels great! I feel that fuel consumption may also be reduced. My today50 20000 km, after the replacement of this product, the speed increase is not particularly obvious, but the speed increase is very obvious, before the speedometer speed flat road fastest 57, after replacement can be more than 65, and very smooth, the noise is better than before Reduce a lot. It feels great! Feeling that fuel consumption is also likely to decrease. translated by Google Translator View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
Comfortable Pulley!
I bought a separate 5.5g 6g of Other Brand Product for setting up, but hellip;… result, the city with OEM ProductWeight Roller The ride setting out, 60km on meter reading, 67km downhill
5.Even with a 5g 6g mix, acceleration is only slightly faster and fuel economy is terrible My top speed was barely 60km
The belt is also OEM new
The OEM Pulley was also machined and used, but it made a go-go noise when the speed was increased
KITACOPulley will no longer have this Comfortable
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
honda dio of 62
the variator stood up like a native instead of the stock ... put the rollers of 6.5 grams, also stock from 0 to 35, is gaining briskly and then it is very hard to gain ... the arrow on the speedometer lays down .. I measured a maximum of 63 km by the application on the android. used to go 55 -57 km. I think I need to experiment with the weight of the rollers variator has risen as a native instead of stock ... put videos of 6.5 grams too stock from 0 to 35 is picking up quickly and then very tyzhelo dials ... the arrow on the speedometer is lying .. measured on the application on androde a maximum of 63 km. used to go 55 -57 km. I think it's necessary to experiment with the weight of the videos (translated by Google Translator) View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
high speed pulley
this pulley set is ecellent the quality is very good and fitts the honda today excellently would recomend for all honda today mopeds you need this pulley for your moped before top speed was 50kph max now will easly do 65-70 kph View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
af62
Its good for my honda af62 KITACO High Speed Pulley Kit Type 3, I installed it and take max speed the delivery is very fast I recommend to all these site and the product for honda af62. View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
Really good product, works well
Honda Today AF61, I went about 500kms since I installed it and had no problems. Acceleration did not change, but the top speed is way better. Before it was 50-55, now 60-65. You can really feeel the difference, it makes the scooter useable in traffic. Now I can overtake the cars going at 50. Before this kit, it was dangerous. It is highly recommended. Especially for this low price, its an awesome upgrade! View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
Excellent simple upgrade
Stock scooter - around 57km/hr max. Now top speed of ~65km/hr after adding the new pulley, also noted better acceleration. Very happy with the improved performance. Really easy to install. I tried lighter rollers (5.5g) with this pulley but this appeared to negate the performance improvement of the pulley. Would highly recommend for simple performance upgrade. View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
Excellent product! I'm very happy! With this pulley my stock 49cc Honda lead AF48 has the top speed of 72kph by GPS! I use 8,5g roller weights.
Excellent product! I'm very happy! With this pulley my stock 49cc Honda lead AF48 has the top speed of 72kph by GPS! I use 8,5g roller weights. View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
[Webike Monitor] It changed together with exchange of the Belt worn-out for ten years in the GIORNO CREA of the no-Maintenance, and the all worn-out Weight roller. The description was also intelligible, and since the Grease was also attache
[Webike Monitor] It changed together with exchange of the Belt worn-out for
ten years in the GIORNO CREA of the no-Maintenance, and the all worn-out Weight roller.
The
description was also intelligible, and since the Grease was also attached, attachment was easy and has worked immediately.
The
Weight itself thinks that the maximum high speed was extended a little by it although the same weight as a NORMAL was used.
Since the former state was severe, he thought whether to change very well, but it was not a forge fire which changes dramatically.
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
It was equipped to Giorno crea of normal. The exchange itself was easy (the tool which fixes a pulley was made on my own) but compared to before, acceleration was not like I expected. I'm not sure whether WR has been genuine the belt may be exhausted, the
It was equipped to Giorno crea of normal. The exchange itself was easy (the tool which fixes a pulley was made on my own) but compared to before, acceleration was not like I expected. I'm not sure whether WR has been genuine the belt may be exhausted, the maximum high speed became slow a little for the moment. In the other's impression, it is said that the maximum high speed was extended after using for a while, I would see what happens. If useless, I would exchange a belt and do WR adjustment. View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
(1) Only a Pulley is 58 km by the time of exchange (WR 5.5gx3 pure 6.5x3). (2) Seven (a Belt, a Needle jet, and Muffler exchange are additions)g x six were reached now. The maximum high speed is 64 km. It seems that the direction constructed after bevelin
(1) Only a Pulley is 58 km by the time of exchange (WR 5.5gx3 pure 6.5x3). (2) Seven (a Belt, a Needle jet, and Muffler exchange are additions)g x six were reached now. The maximum high speed is 64 km. It seems that the direction constructed after beveling lightly with the Router, since the R section of WR was so so as surely it was in in play [ other ] can feel an effect more. It is considered that it is better to measure after checking it, decrease of a Tire, and air pressure. View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
AF61 was equipped. They are a bore up settled, and a gear ratio, WR weight and a CDI normal state. time of normal: -- 58 km/h -- :[ this ] 62-km/h takegawa: -- 68-km/h consideration: -- normal and the thing of a kitaco in near a pulley outermost p
AF61 was equipped.
They are a bore up settled, and a gear ratio, WR weight and a CDI normal state.
time of normal: -- 58 km/h -- :[ this ] 62-km/h takegawa: -- 68-km/h consideration: -- normal and the thing of a kitaco in near a pulley outermost periphery part, in roller guide form, although the roller movable part (curve) is lost,
As a result of as for the thing of a takegawa connecting the curve smoothly to the last, a roller's being able to move up until last minute by this and a drive face's pushing out, a ratio in variable speed spreads more and is considered to enable further improvement in the speed.
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
WR was attached to TODAY (AF61) normal by 5.5gx6 of the kitaco. Although the acceleration up to 50 km became better than before immediately after attachment, the maximum high speed is not extended easily. -- Acceleration and the maximum high speed wer
WR was attached to TODAY (AF61) normal by 5.5gx6 of the kitaco.
Although the acceleration up to 50 km became better than before immediately after attachment, the maximum high speed is not extended easily. -- Acceleration and the maximum high speed were extended in the place run about 15 km after attachment.
It is as good as the elongation in particular of acceleration is no match for normal.
buying it, if you think that he wants acceleration of Today to a slight degree -- it is -- !.
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
The HONDA today (AF61) is equipped. WR is 5.5x6. Since the place in which I live had many slopes, preparations exchange was carried out at acceleration serious consideration. After exchange rises and it reaches it that it is good and a slope d
The HONDA today (AF61) is equipped.
WR is 5.5x6.
Since the place in which I live had many slopes, preparations exchange was carried out at acceleration serious consideration.
After exchange rises and it reaches it that it is good and a slope does not have difficulty, either.
Although it seemed that the slide piece was attached and there was a problem in durability by word of mouth, mine has not broken [ whether it has been improved and ].
If it equips, a certain grade can strengthen acceleration and the maximum high speed, but since it is 50 cc fundamentally, a limit is visited.
If it equips also with a price according to its style since the thing of TAKEGAWA is cheaper, I will think that it is good.
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
It changed into this pulley. A belt is also exchanged for a weight roller together. The dio which comes out only 55 K came to exceed 60 K. Weight rollers are 5.5 g x six pieces. It will be made a little heavier, and the maximum high speed
It changed into this pulley.
A belt is also exchanged for a weight roller together.
The dio which comes out only 55 K came to exceed 60 K.
Weight rollers are 5.5 g x six pieces.
It will be made a little heavier, and the maximum high speed will be made to raise to a slight degree, or it worries.
Being extracted now by the same moped was lost.
Although attachment is also easy, when attaching, I consider that it is more nearly infallible for there to be a torque wrench.
I am fastening with feeling (^_^;)
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
After it carried out [ sound / strange ] whether the limiter was applied at 60 K from the pulley neighborhood, and speed was not extended, before [ with which DIO (AF62) was equipped ] attaching, but attaching this, an allophone also becomes small, and it
After it carried out [ sound / strange ] whether the limiter was applied at 60 K from the pulley neighborhood, and speed was not extended, before [ with which DIO (AF62) was equipped ] attaching, but attaching this, an allophone also becomes small, and it exceeds 60 K satisfactorily. View detail