Reviews
Very easy to use!
Used for Oil replacement!
The scale is accurate and it has a lid!
I guess you have to buy from a proper manufacturer.
It was the right decision to go with KITACO!
View detail
KITACO Oil Jug1Liter
I wanted an Oil Jug with a lid, so I bought one.
Good because Garbage doesn't get in when storing.
View detail
Very easy to use
I wasn't expecting much, but I bought it for Sale. The scale is easy to read and accurate, the nozzle diameter is appropriate, and it comes with a Cap, so overall I'm glad I went with this. 1L product was purchased, but it was the right choice as it is better to fill it with titbits. View detail
Not Just an Oil Jug!
【Impressions】
I am satisfied with this product because it is not just a product to put oil in and pour it, but a detailed device that makes it easy to change oil for motor cycles.
[Good point.
Scale in 100 ml increments
Many products do not have a scale or are measured in 500 ml increments, but the Large body is measured in 100 ml increments.
●Cap included
A cap is attached to the nozzle tip and to the oil supply port to the body.
Prevents dripping during storage and foreign matter from entering the body.
Mesh is attached to the root of the nozzle.
It has a rough mesh. Even if insects or parts fall on the body, they can be caught.
[What's on your mind]
Nozle is not self-supporting when attached in the empty state.
Be careful when filling the jug with Oil because the jug may topple over on windy days.
When putting Oil in the jug, it is safer to remove Nozzles.
No place to put the Nozzles when they are removed.
I would like to be able to keep the removed Nozzle attached to the Body. This is my hope.
★I introduce the maintenance method of SUPER CUBPRO in my blog.
https://cub-noru.com
View detail
This is the only option.
[How is it used?
Used for Oilfor Replacement.
How was your experience with it?
It is insanely comfortable.
It is great that there is a lid on both of these when the Nozzle tip and Oil are inserted.
Without a lid, dust and other debris will inevitably get in.
This eliminates all the hassles of cleaning them with Parts cleaner each time, or keeping them in bags to prevent Garbage from getting into them.
It is wonderful that no impurities are mixed with Oil.
View detail
Ideal for moped Oil replacement
This is my first attempt at changing oil. I have been asking the shop to change the oil in my other ZX-10R, but I tried to change the oil in the ZOOMER by myself. To sum it up, it is very easy.
Various Oil Jugs are available from other manufacturers, but I think Motorcycle Products Manufacturer is the easiest to use for Motorcycle use. The deciding factor in purchasing this product was that it comes with a lid and the memory is engraved in 100cc increments.
The Oil Exchange is an opportunity for me to try other maintenance by myself.
View detail
Convenient with a lid
I used to store my Oil Jug in a bag because Garbage would get in it when I stored it, but this one has a lid, so it's less work and more convenient.
It was easy to understand the amount because it came with a memory.
View detail
It is good to have many Type of capacity
I bought the 1L one, but since I bought the Large type, I needed more Oil at once, so I bought the 2L one.
It is as easy to use as the 1L.
View detail
Improved workability for oil replacement
When I changed the oil, I used to put in the oil with a conventional roto, but the diameter didn't match and it leaked.
The Nozzle tip diameter of this product is Exactly the same as the Motorcycle side inlet, and I felt that it is indeed a Motorcycle product.
Also, the tip of Nozzle has a screw, and it can be sealed with the attached cap, so it doesn't stain the surroundings with the oil left in Nozzle when it is stored.
I wanted a scale in 100ml increments, so I went with 1L. The durability is yet to be seen, but if it lasts to some extent, I would like to Repeat.
View detail
Oil Jug with Lid
[How is it used?
I bought this to replace my old Oil Jug which was too hard to use.
Was the one you received as per Image?
The product was exactly as shown in the picture and there were no problems.
How was your experience with it?
There is also a lid on the Nozzle, so even after you've finished using it, you can store it without dripping oil, so it doesn't stain the surrounding area and can be used in a clean way, which is very helpful.
The scale can measure up to 1 liter.
[Points to note]
The black lid at the top is very easy to remove, so be careful.
Even if you close the black lid, you can't prevent it from overflowing by slanting it.
How did it compare to other products?
The Nozzle tip lid is still reassuring.
I think it's a big difference between having this and not having this.
It's very helpful because it's so messy to think about all the drips and spills.
View detail
Store as is
It is convenient to store it as it is when it is left over because Cap is attached to jug. View detail
100ml increments are good
I used it to replace the OIL on my MONKEY125.
MONKEY is 900ml, so this product is easy to use because the scale is in 100ml increments.
What I'm interested in.
Nozzle is too long.
The netting on the nozzle slows down the flow of oil.
It's about the same.
It's also nice because the price isn't that high.
View detail
Expected
[How is it used?
I used it only once to change the engine oil.
Was the one you received as per Image?
It was smaller than I thought it would be.
How was your experience with it?
Until now, engine oil has been used in the lower part of the engine.
I had to adjust it while staring at it, but it was better to put it in after measuring it well.
It's convenient and gives you a different sense of security.
However, one thing that I thought I failed was that my Motorcycle, SB250, was
You need at least 1.2Liter when changing Oil, so you need to divide Oil into two times.
It's something you have to put in.
1.I should have bought a product that measures up to 5 liters...
[Points to note]
The lid is attached as an accessory, but it doesn't close that tightly.
Not to be used for spilling liquids.
Use it to prevent dust from getting in during storage. (Failure to do so)
How did it compare to other products?
This is my first purchase of Oil Jug, so I have nothing to compare it to.
1.If you have a 5Liter product, buy that one.
View detail
Just the right amount of Large
I bought this for my CT110 HUNTER CUB to do the oil change myself.
Not too much, not too little, and it's for 1L.
I decided on this product because it has Memory, a lid to prevent dust from entering during storage, and a Cap on the spout.
The hose on the spout seems a little too long, but it's easy to use.
View detail
Let's measure exactly how much Oil we have.
We use 2 kinds of oil, 1liter and 200cc, because too much or too little oil can damage the engine. View detail
The capacity of the 250cc Motorcycle is just right.
[How is it used?
Oilfor Replacement
Was the one you received as per Image?
It was stronger than I thought.
How was your experience with it?
With a 250cc Motorcycle, the capacity is just right.
[Points to note]
If you have a four-cylinder, large type, it is smoother to buy the Oil Jug of large threshold size.
How did it compare to other products?
Cheap
View detail
Easy to get in!
I purchased this for use when changing oil.
The scale makes it easy to measure the right amount.
In addition, the spout is thin and easy to pour.
It also comes with a Cap so your Oil won't drip when you're storing it.
A Cap is also included at the point where you pour the oil into the jug, so there is no dust buildup in the jug.
View detail
Not good for the price.
I bought this product to see how much oil I need to change, which seems to have a good reputation.
It seems to be a bit hard in terms of material and seems to deteriorate and crack quickly. This is a good product.
Nozzle is also hard and difficult to use, in my opinion, in terms of bending, etc.
Also, if you don't use the Nozzle, it's fine if you can store it inside, but the Nozzle is so hard that you have to force it out or it won't fit.
View detail
Maintenance essentials
The Oil Jug that I used to use, I think it was purchased at Home Center's Car Parts Corner I bought it because I ran out of Bellows in the Nozzle section. In OthersMaintenance, it is very useful. When storing, you can put Dustclothetc. in it to keep Dust and Garbage out of it. I think it's good. View detail
I thought it was good in Oil Jug.
I've used several Oil Jugs and I think this one is the nicest to use and store. It's also good that it has a little bit of a brown strainer inside.
If it's a cheap one, Oil leaks from the slot of Nozzle, but this jug has no leaks or It can be used without.
It also comes with a lid and a Nozzle Cap, so you don't have to worry about Garbage getting into it when you store it. There is no need to worry about it.
View detail