Reviews
I prefer a little more Up.
I wanted a little more angle on the Up. It would be better if the angle could be adjusted. So I am not satisfied with the angle of this Number.
Installation is not difficult, although a little cumbersome.
I wish it were a little cheaper.
View detail
Cb400 fender eliminator
The Daytona fender eliminator kit is a high quality Japanese piece. Even with the instructions in Japanese it is not hard to install at home with basic tools. With the option of the reflector the keep in line with some state laws(if you want) it makes the tail end look so much cleaner and would recommend it to anyone looking for a clean look. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Top quality
The fitment on my Zephyr C1 1991 was perfect and helped to upgrade the look to a modern feeling. Very high quality and finish! View detail
I use it with DAYTONA's License Plate Holder.
KIJIMA I bought it because it was less expensive than KIJIMA KIJIMA. I knew it was worth the low price. 。 KIJIMA is more expensive because it comes with a cover here. View detail
Fitting
Wiring of the License Plate Light can only be done from the top of the Bracket, there is no hole to pass the wiring through. This is a waste because the design is so good…; Since the number mounting bracket, reflector bracket, and body are all fastened with the same bolt, it is necessary to pass the wiring through three holes, which is a bit troublesome and quick. However, since it is compatible with the Hook for loading and the design is good, I don't mind it once it is on.
Finally, be careful with the Tail lamp protection Cushion as it is hard to locate. I use a small amount and store the rest FOR REPLACEMENT.
View detail
I bought it by mistake.
I made a purchase by mistake, it is like a pushy sale.
No response when I contacted them. Worst
Sorry, it's been about 2 months and this is my rating. Please contact me. I have filed for a return!
View detail
As expected from DAYTONA
No problems with installation.
Instruction Manual is easy to understand, even for the uninitiated.
If you have the tools, I think you can complete the work in Small one hour.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R
Fender Eliminator is a cosmetically pleasing product, but its construction is subtle.
[How is it used?
Installed on a YAMAHA XJR400R 2007 model.
I didn't want to go with OEMFender because it seemed too fussy, so I went with Fender Eliminator.
I thought the Fender Eliminator itself was made the same way, so I bought this one, which was cheaper on Sale.
Was the one you received as per Image?
It was just as Image.
I felt it was heavier than I expected due to the material, and I am glad I chose black, although there were also products in a plating style.
Was the installation difficult?
For those who usually disassemble for maintenance, etc., it is easy.
The actual work itself could be done in about an hour.
However, as I will add below, it was very poorly made, so Large was strange.
How was your experience with it?
The bolt is securely fastened with a lock nut so that the bolt does not loosen while driving.
[Included Parts:were they on?
Instruction Manual 2 copies, DAYTONASticker
[Was there anything that disappointed you?
This is the most NegativePoint of this issue.
The instruction manual says to install the tail cowl with the blinker attached to the Fender Eliminator Bracket, but in reality, the blinker is covered by the bolt at the bottom of the tail cowl, and the bolt cannot be tightened without the blinker attached. However, the blinker is actually covered by the bolt at the bottom of the tail cowl. In fact, the blinker is covered by the bolt at the bottom of the tail cowl, and the bolt cannot be tightened with the blinker still attached.
I can't complain since it is only an Other Brand Product, but I was a little disappointed that it could be called an exclusive product.
Other items that would be helpful
I hope you will take a look at the installation points and hang:I have attached a video of the installation.
Availability and clarity of Instruction Manual:It is written in simple Illustration and bullet points, but it is difficult to understand if you are not familiar with it.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
Well-fit and study kit
Installed this on my American ZRX1100. Instructions are included (in Japanese, which I read, but a translation app should work fine) and are detailed. Fender replacement is solid aluminum, seems very sturdy. Definitely cleans up the back and provides sturdy mounting for signals and taillight. Demerits: License plate holes are spaced for Japanese license plates, so you'll either need to drill out your plate, or the mounting surface if measurements don't line up. Mudflap materials do need to be cut by hand and rigged up to be secured to your frame - it can be tough to get a perfect fit, but the supplied materials come pretty close. You lose your tool kit box under the tail, but it looks like there's space for it. Maybe drill your own mounts if you want to try to keep it? View detail
Fits: KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100
Fender Eliminator
Easy to install, and most importantly, it looks Parenthesis good! View detail
Tail section Refreshing
The installation took a fair amount of time.
License Plate LightQuantity:I appreciate that it is a Set.
View detail
Fits: YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom)
It was felt refreshed!
It was felt refreshed! View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
Excellent Tidy-Up Kit
This Daytona Fender Eliminator Kit did a wonderful job of cleaning up the rear of my ZRX1100. Having the bulk of the product made out of metal helped a lot with rigidity and confidence in the product. I really appreciated the included spare plastic to use as a cover for the now open gaps in the bottom of the stock rear fender. In all, it is a great product. View detail
DAYTONA Fender Eliminator Kit
First, that got the package was well packed. everything was tidy in the box with protections to prevent damage from the delivery. when I unpacked the package everything was perfect. It's really hard in to install even following the instruction book. as you can the picture, it's really tidy and clean with good quality of hardwares. it looks very nice on my bike and is well protected for the bike. But some of the screws were too short to use. View detail
Stylish!
Surprisingly many people are dissatisfied with the BOLT Shoulder Bag's Rear Fender, aren't they?
Installation should take about 30 minutes to an hour.
In some videos, the Bolt on the Fender side is removed and the Bolt is lifted up, but it was not necessary to go that far to do the work.
One concern is that when the OEMFender is removed, the coupler inside the Fender is exposed, so I am concerned about whether the Fender will be waterproof and sturdy enough to withstand large amounts of rain.
The overall construction is solid, so I think it will be safe from vibration.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
It is easy to install.
Installation is easy, even for amateurs.
It will look Sharp and Refreshing ass.
Japanese Vehicle Inspection Correspondence, so installation can be done with confidence.
View detail
Smart & looking good on the super 4
Item fitted nicely & look smart on the bike. Did not regret buying this tail tidy although it is costly. Highly recommended for super 4 users View detail
Great
The Daytona Fender Eliminator kit is the best as it comes with the lights and reflector which is great for legal street use it is highly recommend it looks great on my Super 4 View detail
Fits: YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R
It has Reflector and is very affordable.
It is installed on WR250R.
WR is characterized by a pushed-up tail design, but
It is Fender Eliminator to make such Rear area more prominent.
As a result, I am satisfied with more Race ish.
Of course, the mud splashes more and more, so the emphasis is completely on appearance.
The Reflector is attached from the beginning, and the balance with the License Plate Light is also good leaving the OEMBlinker as it is, and I think that this product is one product that is very excellent in the cost performance. I think that it is.
View detail
Refreshing Rear
The rear area was refreshing and the reflector quickly loosened the screws and was gone! It seems that other people lost it too. Please do something about it, DAYTONA, or make it Nut to prevent loosening from the beginning, or put Spring washer between. View detail