Reviews
As expected from an OEM Product, the wind protection is very effective at any speed.
No instruction manual is included in the package, but installation is not difficult. The only thing to note is that an Impact Driver is required to remove the grip end because Screw lock is coated on it. In addition, the Screw lock attached to the removed Screw must be cleaned before Smooth installation is possible.
The small blind lid on the handlebar is removed and attached to the handlebar, which is secured at the grip end and at two points on the handlebar side. I am wearing OEM Product High Screen and I can use it comfortably without any interference even if I cut the handlebar to full lock. The windproof effect is high and the gloves are not exposed to any wind. In the summer, it is also good for keeping insects away. The price is high, but it can be mounted securely so you can ride with peace of mind.
View detail
HONDA Honda knuckle guard
This is an OEM Product, so the quality is good. This is not the current model, but an Option product of the previous model.
Installation is no problem
View detail
Processing is required if you are using Lever of Other Brand Product
I bought this for my '19 400X.
[Mounting]
U-KANAYA AluminumRetractable Lever TYPE-R I'm using the
Clutch SideLever interferes.
Therefore, it was necessary to cut the Knuckle guardBody and the Genus Gold Bracket.
There is no problem with the installation on the Brake lever side.
[Effect]
I put it on hoping it would provide some wind protection during the winter months.
It didn't work as well as expected due to the narrow vertical direction.
(Maybe my expectations were too Large)
However, the windshield effect itself is sufficient and I like the Design.
View detail
Processing is required when using Other Brand ProductLever
I installed this on my '19 400X.
[Mounting]
Lever. "U-KANAYA's Aluminum Retractable Lever TYPE-R" I'm changing it to
It interferes with the Lever on the Clutch Side.
I had to shave the Knuckle guardBody and the Bracket for mounting to avoid the interference.
There is no problem with the installation of the Lever on the Brake Side.
[Effect]
I bought it hoping it would provide some wind protection during the winter months.
Knuckle guardBody was a little narrow in the vertical direction, but not as much as expected.
(Maybe I was expecting too much.)
However, I feel that it works well and I like the Design.
View detail
Adventure feeling Up.
It is neither possible nor impossible.
The product itself is not so Large, so it does not dramatically improve the thermal protection.
It's better than nothing, I guess.
Design is safe and organized.
The installation itself is easy, but it's hard to remove the Bar End ….
If I didn't RenBarrel the Impact Driver at my local Home center, I probably wouldn't have been able to remove it.
If you can't remove the Bar End, you might want to use the Universal Product of Mirror Co-closing Type.
View detail
WEBIKE actually sent me two hand guards. How can I install them? The hand guard and shipping fee were refunded, but there is no return duty. This was the first time I encountered this situation when I purchased 100 million yen accessories from WEBIKE. View detail
Fits: HONDA FTR223, HONDA FTR223, HONDA FTR223, HONDA XR230 Motard, HONDA XR230, HONDA FTR223
It looks and performs perfectly.
It was on my FTR223 that I got from a friend. It's light, not too assertive looking, and seems to protect my hands from stones, mud splashes, etc. View detail
Design is good, but..
The design is OEM, but it fits the body and looks cool!
It only reduces the driving wind, but it is not windproof.
If you're looking for windproofing, I'd go with Other Brand Product.
It's easy to install, but if you follow the installation instructions, there are some parts that are difficult to do, and I think you need to be creative there.
Fewer tools were needed, which was good there.
Good for me personally
View detail
Total satisfaction
First of all, I'm very satisfied with the Honda design of that part. It improves the trail look of the bike, while protecting hands from cold. It's built with good quality material, and fitting system is very good. Furthermore, the sale price was very reasonnable, and shipping from Japan to France took less than a week, quite fast. In conclusion, I'm totally satisfied with my purchase, won't hesitate to buy from webike again. View detail
Be careful with vehicles equipped with external Lever and external Screen.
I'm replacing the lever with a DAYTONA one.
Clutch Side interferes
interference part (Part of Bracket and LeftGuard) I used a sander to cut and install the
If you cut the Handlebar as far as it will go.
Handlebar Guard and Screen (Made by GIVI) does interfere with the
I can do Handlebar Lock without any problem.
View detail
Fits: HONDA FTR223, HONDA FTR223, HONDA FTR223, HONDA XR230 Motard, HONDA XR230, HONDA FTR223
nice parts
The delivery is very fast and the quality is good. It is good enough to want to buy again. The FTR is cool. I would like to be able to write a letter in Korean View detail
Honda OEM hand guard
The hand guard fitted to my 2018 NC750X nicely. However, an instruction was not included in the package. You can easily download from the web. View detail
HONDA Knuckle Guard
This hand guard is very soft and has good toughness. Installation is also very convenient and does not require modification. View detail
The package is missing instruction/manual.
The package was arrived in time. But the package is missing installation instruction. Can someone publish it ? Product quality is good. View detail
Looks satisfied
Regarding the installation, there was no Instruction Manual and I was a little confused.
There is Instruction Manual of WebPage, I downloaded Instruction Manual, I got a chance.
I am worried about strength.
It seems to be broken with Fall down etc..
The appearance is satisfactory as it is.
Wind burning seems to work as it is.
View detail
Fits: HONDA FTR223, HONDA FTR223, HONDA FTR223, HONDA XR230 Motard, HONDA XR230, HONDA FTR223
Installation on OEMHandlebar is very simple
I wanted an OEMKnuckle guard by appearance and purchased it.
Installation work took less than 10 minutes in a blink of an eye.
Although I tried running, I felt that the condition of the wind hitting my fingers was relaxed, even though I have done Gloves so far it is quick to get the fingers cold, but thanks to the addition of the Knuckle guard I think that my fingertips have become less cold.
With the height of the Guard upper part a little more, it corresponded to the wind around the back of the hand ... and I thought four stars.
View detail