Reviews
Lever and hand protection
I installed it on my gasgas EC250 which I always use for forest road touring.
I often fall down while touring on forest roads, and I installed it to avoid damage to the lever.
In my experience, with the attached Clamp, the hand guard moves quickly and needs to be corrected every time it falls,
I've been using it for a while, Hand Guard Mount Bar Clamp Type We use a combination of the two.
I recommend the Large variation.
View detail
ZETAArmourHandlebar
We have purchased ZETA for the NameValue&Style nature.
Installation was easy, even for a beginner.
As for durability, I can't evaluate it because it hasn't been used yet.
I think the Material feel is high quality.
View detail
It is easy to install.
Installed on a KLX230.
Although it was an OEM Handlebar, we were able to install it without any problems and it was the easiest job we have ever done on various types of vehicles.
If you cannot prepare an open-ended Throttle, you can use Saw to cut it.
View detail
It came seemingly to be an off-motorcycle. It is recommended. Since attachment was attached to the pure grip heater, please give it to me by attachment store search of the Webike site. Correspondence was also very good.
It came seemingly to be an off-motorcycle.
It is recommended.
Since attachment was attached to the pure grip heater, please give it to me by attachment store search of the Webike site.
Correspondence was also very good.
View detail
Used on D Tracker and FTR223
[How is it used?
D Tracker, used on FTR223.
Mainly used to protect the front brakes master and clutch lever in the event of a fall during circuit driving and motard racing.
D Tracker allows you to set the Quantity for practice runs and for race outfits.:2 SetThey were using different methods. (For practice runs, I use the one that has been torn to shreds from falling over a lot. It's a waste of money to change to a new one, so I keep using the battered one for practice).
The handlebar was attached to a Renthal, ZETA φ22.2.
Was the one you received as per Image?
Anodized color as per image (Black) The Bent was just as I had imagined it would be. The body is also made of a solid aluminum bar, and I don't think it would break even if it fell over. The body is also made of solid aluminum bars, and I was impressed by the ruggedness.
Was the installation difficult?
However, if you have changed the front brakes master to a radio pon, you will need to use the longer mounting bracket (sold separately) or add a washer and collar to the bracket as shown in the photo. It is also necessary to add a washer and collar to the supplied bracket as shown in the photo so that the body does not interfere with the MASTER.
I also changed the routing of the body to prevent it from interfering with the wire and wiring when it falls, and tightened the bolt on the bracket to prevent it from rotating.
How was your experience with it?
I've used it for about 5 or 6 years, and I've fallen many times on both Asphalt and dirt, but the body never broke, and the front brakes master never broke, the clutch lever never broke, and the wire never tore. In addition, the body was not bent if the fall was only SlipDown.
I've never crashed on the high side before, including the time I was competing in the race, so I can't review whether I'm safe or not after being hit on the high side.
In addition, even if the surface was scraped off by a fall, it would not get stuck even if it fell over next time if the surface was made smooth with File or Glineda.
In order to prevent injuries, it is recommended that the surface of the board be sanded down after a fall.
[Included Parts:were they on?
Bracket, Anchor, Bolt, etc.
[Was there anything that disappointed you?
Anodized (Black) The color faded rather easily and became brownish. I was disappointed in that.
[ITEMS TO BUY TOGETHER
Hand Protector for ArmourGuard
You should buy one to protect your hands from stepping stones.
However, there is an aspect of aerodynamic drag in the Motard race.
If I fall and scrape it off, I'd better buy this one again, but it doesn't break easily, so I can just use it. LOL!
Color, Washer, Long Bolt
If you are installing a Radipon, you need to buy the long Bracket (sold separately) if you don't want to skimp on it, otherwise it will be impossible to install.
View detail
You were right to buy it.
It installed beautifully!
It's more sporty, looks better, and is safer!
View detail
easy to install
I used to have the AdventureGuard, but it didn't fit well and I switched to this one. I like the design of this one better. View detail
Nice.
I was wearing the AdventureHand guard, but I couldn't get the mounting position right, and the guard position was pretty much down ….
I replaced it with an Armor Handguard.
I have bought the Knuckle guard, but I am troubled because I need to remove the ZETASeal to install it.
It's a good looking product and my favorite.
View detail
I like the leeSale price at a good standard and leeSale price...
I use it when I race in the Enduro race with my CRF150R?
The look is as expected of ZETA. Parenthesis with good texture and well mounted Bolt is all Material:It's stainless steel and glistening.
This is a universal product, so it can be installed in combination with CX Handlebar. But it is not possible to insert the bolt into the Handlebar straightly. There are few restrictions on the angle of installation, so if it is within the range of normal use, it can be used. It is written in the Instruction Manual, but there is an order in the tightening of the Bolt. (∩´∀Translated.) ∩
So far, JNCC's COMP, CGCHardEnduro's 5-hour endurance (solo entry) The Lever and Hand Guard works very well as a protection for your motorcycle and your body, even if you hit a standing tree or fall. It has a large radius on the outside so that it can be slippery even if it hits a standing tree. Tell me. Sometimes you can get it.
It is removed when running the Motocross course, but repeated attachments and removals are not a problem.
Large It's not easy to say in a quiet voice, but it's a product of a well-known institution, and it's so durable that it's sold at a high price in NetOaktion and other places, even if it's scratched when you don't need it anymore.
View detail
You're a lifesaver!
I hit a standstill and a standing tree on a forest road, but Lever didn't break.
The Hand guard was pointing upwards, but when I hit it, it went back to where it came from.
I'm glad I had it on. If it wasn't, Lever would have broken off and there would have been nothing I could do about it.
View detail
I like this one for MOTARD
What made you decide to buy?
This is an installation to the HUSQVARNA SM450R
When I said Motard bike, it was Image with a Handlebar Guard So I looked for it
I thought it was just Hand guard, but it's called Armor Handguard, just like Frame You're Guarded
And you can put a Guard on it, so it looks good and protects you well It's two birds with one stone
I didn't hesitate to buy it
How was your experience with it?
Well, physically speaking, the Handlebar area is heavier now
However, it doesn't have a guarded feel to it There is a sense of being well protected
ZETA has a Seal on it, but if you install the Guard in another way, you can see the mounting hole there There is a need to bust the Seal
The design is GOOD in terms of appearance, with or without the Guard
Was it difficult to install? (In the case of hard parts)
If you follow the instruction manual, it is not difficult to install the Handlebar However, it may be difficult to install it depending on the Parts attached to the Handlebar Required
What is the point or hang of installation (for hard parts)?
The angle should match the height of your Lever If Lever breaks, it's a loss for you if you fall down
[Was there anything that disappointed you?
Anodized is a weak point If you use it outside for a long time, it will fade
Do you have any wishes or improvements you would like to make for the Manufacturer?
It would be easier to get a hold of it if the price was a little lower It's a consumable product
[Others]
You can also use it with a single body, and with the Guard, you can use it with the Furthermore, you can add blinker type to it However, it's not easy to buy because the price is so high when you try to buy all of them Yes
View detail
Products as expected
I installed it on my CRF250Rally
Net's information interferes with the Meter area, etc... I'm worried about it
I was prepared to install it in its own way
As a result, the installation point of the Bar End has become a little unreasonable I was able to install it without any contact etc. around it
The others I used were
ZETA
Teflon Throttle Tube Open End
X3 Protector
DRC
Team grip Open end Quantity:Pair (for Left and Right)
The OEM is CloseType, so ZETA's Throttle tube makes it open end You must do this
None of them were installed without any special modifications etc
If you buy the X3 Protector from Webike, it doesn't come with the M6 Bolt, so you need to buy it separately I bought it
I think it could be attached a little more neatly if you adjust the order of tightening and fine tuning, but I'm satisfied with the current state of affairs
The image is hard to see, but I'll post it
I hope you find it helpful
View detail
Zeta Armour Handguard
Beautiful product of high quality and build with good material. Fits well on stated handlebar and colours are made to suit OEM colour. Boought them for replacement of an older pair due to a skid. A really tough handle this is as it protects my bike well from the skid. Thunbs up for this product. View detail
I got stood up, but it was saved because there was this!
If I had stopped at an unstable position on the slope of a riverbed, I could go down to Balance and stand up... But the Guard firmly protected his hands and Lever, so the Guard was only slightly scratched. I want to avoid such a thing, but there is a dangerous thing a little. In the case of this time, it may have been broken by Lever if there is no Guard, and it was good that it was on. View detail
cool
The reason I bought it "because it's cool" It is a simple reason, but it seems that it is well protected, so you can drive with confidence. I think that it would be nice if it was a bit cheaper. View detail
2017 crf250l
I was looking for something that I can firmly Guard and decided on this Zeta.
The attachment is a connection in the open state when looking at the Grip end.
Because Right comes into contact with the Axel bar, it is not good unless you cut the Axel bar to Pipe Handlebar.
But after wearing, it is preeminent security.
View detail
I am glad I turned on (; 'Д `A` ``
I'm glad I turned on ...,,
If you do not, Ubichonpa or yeah ,,,,
As expected Traditional Gold of ZGunDam ,,,,
Not yet, it's over yet !!!!
View detail
Cool!
Installation was easier than I thought.
Even so, I think that Parenthesis improved considerably!
There is a sense of security if you turn on this!
I think that it is worth it though its a little expensive
View detail
Good feeling
Let's say from the looks for now (Lol)
It's strong..
I do not like the installation position, I thought about bending, but did not turn (;^ω^)
Hand guard and Mount are installed at the same time.
Firmly is included, how do you?
I have never played hard yet, so why can not I tell you?
View detail
Knuckle guard at the end
Great guy who prevents injury and car body damage to some extent by this one.
Universal Product lost, it seems that there will be a difference in installation.
Sold separately "Hand Guard Mount Side Type" In combination with WR 250 REMHandlebar, the Bar End part will enter the Handlebar Pipe diagonally.
Drilling - If you set M5 Tap "PROReplacement Guard Bumper for Armor Hand Guard" Can be installed exactly.
I wonder if I can save Mount parts as an option and lower product prices.
View detail