Reviews
Used on XJR1300.
I used this part for the OEM return of the OEM Carburetor on my XJR1300 RP01J. This part was cheaper than ordering from YamahaOEM Parts. View detail
tmr mjn32 main jet for cb400sf
Changed Main jet from #122.5 to #120 for tmrmjn32 for cb400sf to Regular Specification.
Jet is an ultra-precision part, so YOSHIMURAOEM Parts is purchased.
It is a very nice Jet with no BALI etc.
I had to buy four of them because of the 4-cylinder, but I felt it was a bit pricey as the Gold price was quite a bit higher if I got two each for the front and rear.
View detail
tmrmjn32 mj122.5
I have a hanging tmrmjn on my CB and the only initial widths available are #125, #130 and #135, bought #122.5
Purchased to thin it out as it was faltering in the full open range.
Setting has improved and runs comfortably without faltering.
View detail
Reliable ManufacturerOEM Product Quality
Used on SX125R under Restore.
Older motorcycles can often be restored by replacing the inner parts of the carburetor with new ones.
Since they are OEM parts of CarburetorManufacturer, they are very safe to use.
View detail
For rebuilding immovable vehicles
I used it on an SX125R that I bought as a parts pickup. The so-called Mikuni Maru Large Main jet It is
After cleaning the carburetor and confirming that it can be started, each jet is replaced with a new one.
It is good to clean it with Chemical, but since you have opened the package, we recommend that you replace it with a brand new Jet. It will give you a totally different sense of security.
Naturally, the OEM's number is chosen.
View detail
I don't change it much, but...
Purchased for Setting
I don't change the Setting too often, but it's nice to have Stock on hand.
View detail
Whatever it may call it, the advantage to the external article of an original manufacturer's product is exhausted to this without the uneasiness of accuracy. Although it was back-ordered at the time of an order, it was kept waiting for a month by the
Whatever it may call it, the advantage to the external article of an original manufacturer's product is exhausted to this without the uneasiness of accuracy.
Although it was back-ordered at the time of an order, it was kept waiting for a month by the manufacturer missing item and what is comparatively high-priced than an external article cannot be denied, if the charge of safe is considered, it can allow well.
In saying, they are four stars!!
View detail
Mikuni SmallestMain jet!
I bought this to see Mikuni's SmallestMain jet.
Actually, Main jet No. 20 is the smallest, but it was discontinued and could not be purchased.
Currently the smallestMain jet is #30 and the largestMain jet is #720.
I'm thinking it's the Main jet that is not really used because of the swing in actually setting up the Carburetor.
View detail
The difference in size between MJ720 and MJ180…
Compare the largeness of the MJ720 with the MJ180, the largest of the Main jet.
I'll go big!
View detail
Mikuni Main jet number 720
Buy Main jet for Mikuni TMX.
It is the most Large threshold MJ720 for Setting.
View detail
Mikuni TMXCarburetor's Largest Main Jet 720!
I was curious about the Mikuni TMXCarburetor's largest main jet, so I bought one.
MJ 720 Six Square Type/Large720]
Main jet, probably for TMX38.
Mine is a TMX30, so if I put a 720 in it, it will be all CUB.
The hole in the main jet is about 2.2mm…
I could see the distant landscape as normal even when I looked through the hole.
View detail
Long term stock? Badly soiled.
I thought it was Mikuni's OEM, but the Main jet I received said "YOSHIMURAOEM Parts Package.
I bought this product thinking that it was sold directly from Mikuni, but when I asked WehBig, they answered that the product itself was made by Mikuni, but the supplier was Yoshimura.
I wanted to buy directly from Mikuni, so I wanted to make sure that the product name or product details were clearly marked. "YOSHIMURAOEM Parts "MikuniOEM Parts I think we should include a statement in the
I bought a Main jet of a different count at the same time as this one, but it was so dirty that I didn't think it was new. "YOSHIMURAOEM Parts It was a Package of
As expected, the dirt was very bad, and since it was a precision part, I sent a picture and hoped for an exchange. "Clean with Parts cleaner. The answer. The response was so bad that I contacted them again to replace the part with a proper and clean one.
Now can't I soak it in vinegar to remove the stain and use it? I was saddened by the response.
In the end, the parts were returned to the store, and I was disappointed with Webig's response. In the first place, I think that I should put an objection to Yoshimura of the supplier before asking the customer for a response. I think that the supplier is responsible for the problem, because I think that the product was deteriorated due to long-term stock or bad storage method. This is why I wanted to buy directly from Mikuni.
I would like to continue to use WehBig with pleasure and would appreciate any improvements.
View detail
jetting
well jetting is part of the fun for making the best used of the carburetor for your engine so buy these jet and start playing View detail
The accuracy of Mikuni is the best!
I bought it for setting of TMX30.
Although the precision of Other Brand Product is not bad, I made it to MikuniOEMJet because I hate it if it is slightly different from the accuracy of Mikuni.
View detail
Accuracy of Mikuni
I bought it for setting of TMX30.
Although the precision of Other Brand Product is not bad, I made it to MikuniOEMJet because I hate it if it is slightly different from the accuracy of Mikuni.
View detail
I am indebted to you every time.
In my case, because it is a special engine, it is ineffective at Size which I sell at a mass merchandise store
I am using Webike to buy Jet classes..
Previously, Setting was not available if you were using Main jet of a certain Manufacturer
When I changed to MikuniOEM, I heard stories about Setting,
Jet class decided to buy Mikuni OEM.
If you ask me to say your own self, you can stock more than 4 Size each and you will complain!
View detail
Manufacturer thing
Manufacturer thing, so I trust it and purchase it. I am not worried about anything.
Mikuni's circle Main jet.
It is Fu Two.
I think that Mikuni will give out the shape of the main jet like the Bomb kit.
View detail
20 years air-cooled car
I exchanged the Main jet as it was at the time of the new car as a part of Carburetor 's Overhaul.
As the Plug was in a CUB taste, I tried to replace the aged deterioration of Main jet with suspicion.
Engine startability has improved. Plug is also normal burning condition. Due to aged deterioration and repeated repeated wearing, frequent use of Carburetor cleaner I thought that the old Main jet was getting a little hole large enough?. (It is a personal opinion to the last. There is no confirmation because it is a precision part)
The price is also cheap, and we recommend purchasing Jet of ManufacturerOEM along with Overhaul of Carburetor.
View detail
Anyway it will be saved
There are plenty of Jet stocks and it will be helpful.
Especially when Tune Engine, it is nice that there is a Size which is not sold in mass retailers.
View detail
To Carburetor setting
I bought it for Carburetor setting. I will be very saved because the fine Size also arrives with short delivery time. There is no problem with regard to quality. It seems good to keep each SizeStock. View detail