Reviews
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
As I mentioned in the washer section, I think many people lose the O-ring and washer here.:I think it would be much safer to replace it with a Set.
This is a part that can be recommended for Large change.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
What is the cause of the malfunction?
SR400 is acting up again. The fuel mixture is unstable again. Next, I suspected that the valve might be slightly open due to lack of play, so I increased the play, but it didn't work. Next, Pilot screw is a key part of Carburetor, and if Throw system is not stable, we should suspect O-ring airtightness failure. And then I read the article on Webig. Well, I remembered that the O-ring here is for Carburetor, but I replaced it with a slightly larger Universal Product. I saw no deterioration, but there was soot on the O-ring. Soot was removed and replaced with OEM. The result was the same. Incidentally, the Pilot screw has an O-ring, but the Air Screw does not. Next, I thought that the passage of the PilotAir Screw might be blocked by Gasoline. In fact, the oil level is at the limit, and I doubt it, but even when the oil level is lowered, the engine still fails. If the oil level is lowered too much, even the engine will not start. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
OEM
The MikuniOEM Product is of high quality and can be used with confidence. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
XJR400 (RH02J) in carburetor
XJR400 (RH02J) In OEM Parts Number, PS and Set can only obtain O-ring, but it is expensive, but if you use here you can purchase only the necessary O-ring cheaply. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Reliable OEM Product
In use at SRV 250, it will not appear on Yamaha OEM, but here is OEM Product purchase from Mikuni. I can use Air Screw without problem. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
I am saved.
It is very helpful to have inventory of these consumables.
Especially repair O-ring etc - Because I can not repair, I always want to keep it constantly,
Since I would like to purchase it for other shopping, it is a small part, but I can trust ManufacturerOEM Product
I hope Webike also does not cut stocks.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
It is a consumable item.
There is a place indispensable for throw adjustment of Carburetor setting
It is a Pilot screw.
O-ring here is an old car and Large is crashing.
If it collapses, in the case of 4 cylinders etc. with Rose comes out, each Screw can not grasp the exact return rotation and it may suck the air
We exchanged at the time of cleaning together with Washer.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
TZR250 It was used by three MA. Although it thought that O rings, such as a product made from a Straight, would be used at the beginning of , since it discovered here, it purchased. I consider [ that it is difficult to be crushed and
TZR250 It was used by three MA.
Although it thought that O rings, such as a product made from a Straight, would be used at the beginning of
, since it discovered here, it purchased.
I consider [ that it is difficult to be crushed and to measure a size in many cases and ] a used O ring.
After becoming a Trouble in the future only wants to avoid using the O ring of a suitable Size.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Since it is a detached island home also without an article store, it is appreciated that the direct buying of such Maintenance parts can be individually carried out even from a Net. A carburetor out of condition is also done in it its best and
Since it is a detached island home also without an article store, it is appreciated that the direct buying of such Maintenance parts can be individually carried out even from a Net.
A carburetor out of condition is also done in it its best and corrected.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
"O ring was crushed, and I could not complete idling adjustment perfectly, so I wanted to exchange them, if it a genuine parts, I cannot buy an O ring separately. Since it is the same carburetor made from Mikuni, I would purchased as I thought it would pr
"O ring was crushed, and I could not complete idling adjustment perfectly, so I wanted to exchange them, if it a genuine parts, I cannot buy an O ring separately. Since it is the same carburetor made from Mikuni, I would purchased as I thought it would probably suit. Since O rings were also purchased, the unstable idling got stabilized. Since it has diverted, please use by self-responsibility." View detail