Reviews
Trusted Pine Stripe
[How is it used?
I was looking for a KITACO Durable Lens Mini Blinker Set (https://www.webike.net/sd/372536/) because the ball had snapped.
12V-8W [T-10] He is a very rare character, so I thought, "No way! I was about to lose my temper, but I found this 12V-10W [T-13] I got the information that this product can be substituted with
Was the one you received as per Image?
It arrived in the familiar Pine Stripe's Packaging. It is very secure.
How was your experience with it?
They lit up with no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Valve of the Unbreakable lens can be replaced by removing the Lens, but it can also be replaced by pulling out the whole Socket from the back.
Also, some people do not know this, but if you touch the Valve with your bare hands, the sebum from your fingers will adhere to the Valve, which can cause it to heat up easily and shorten its life. 。 Therefore, it is best to wear work gloves or military gloves to protect your hands and fingers.
View detail
Anyway, it's cheap!
[How is it used?
NSR250R (MC21) The lamp is used for the Position lamp of the
I was going to buy OEM Parts from the Parts List, but then I saw that it was marked 12V 1.7W. Then let's find something cheaper with the same rating." I searched for this product and found it.
Also, I don't like bright white Lamps that don't suit the year, so I chose this product in a color that looks moderately warm.
Was the one you received as per Image?
The product arrived exactly as shown in the pictures.
Was the installation difficult?
DMR's T10Socket (https://www.webike.net/sd/24603796/) The combination of the two was used.
Replacement is very easy, just stick it in the Socket.
How was your experience with it?
Personally, I found it quite bright.
I think it's a Brush lamp, but I don't usually look directly at the position lamp.
It is inexpensive but completely safe.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
Not particularly
【Review】
Although inexpensive, it emits light quite well.
OEM Product (34902-750-003) was rather expensive, so I think it is a sufficient substitute.
View detail
I'm doing my job reasonably well.
I bought this as a consumable for my TLR200. This is a Type bulb, which is not seen anymore, but bought for fitment.
After all, it is dark because there is no illumination, but it is enough.
View detail
It's an ordinary bulb
I used it for the Meter Bulb in the LITTLE CUB (FIMODEL)
It's cheaper than the price of OEM Parts, so use this one when it runs out
It is a Wedge ball with the T5 standard
T5 is very small There is a T5Valve of LED outside of the company, but the meter side has
It may not go in, so if you're looking for an absolute one-shot cure, you'll need to take a shot at it
I think it's a good idea to REPAIR in the Valve sphere to be safe here
If you're going for Custom, you might want to Challenge the T5 LED
View detail
It purchases to Meter-valve exchange.Since the required number was five, it is three-box purchase. One is put on the reserve.visibility is also good and legible.The Manufacturer where the Package is also caring about the Valve by entering
It purchases to Meter-valve exchange.Since the
required number was five, it is three-box purchase.
One is put on the reserve.
visibility is also good and legible.The Manufacturer where the
Package is also caring about the Valve by entering a Sponge is transmitted.
View detail
AWB112 It is 12V / entering two 2W T5 CLEAR wedge bulbs.Although Meter lighting, an Indicator, etc. are made to change fundamentally what came at exchange time to LED,By LED, there are parts still suitable in an electric lamp, such as a part supe
AWB112 It is 12V / entering two 2W T5 CLEAR wedge bulbs.Although
Meter lighting, an Indicator, etc. are made to change fundamentally what came at exchange time to LED,By LED, there are parts still suitable in an electric lamp, such as a part superfluously turned on by leakage current, with a part, water temperature, an Indicator of a CHARGE, etc. which are interlocked with others, such as Tray lighting of the Center console of a car, and are made to turn on faintly by undervoltage.
Although it is T5 ordinary wedge bulb, since there are also red and a green coloring Valve in the Lineup of the company, it is good to be able to choose by the use or liking.
View detail
a [buying motive] -- the speed meter and fuel instrument illumination (the speed meter side diagonal below) of -ZRX1200R (06) went out, [ sake and ] Kawasaki brand-name parts instead This product product number:1PWB123C, correspondence vehicle typ
a [buying motive] -- the speed meter and fuel instrument illumination (the speed meter side diagonal below) of -ZRX1200R (06) went out, [ sake and ]
Kawasaki brand-name parts instead This product product number:1PWB123C,
correspondence vehicle type wide use and one description-of-item ON color: -- clear rated: -- 12v 1.7w drawing number: -- 12-7 wedge / single bulb glass and mouthpiece form: -- T6.5 wedge (special), application and use:meter ball, position ball, and electric lamp number:WB123 was purchased.
[Price] It is somewhat cheaper than a bulb, 12V 1.7W, T6.5 (part number: 92069-1070). [ authentic positive in - kawasaki ]
[Others] Although it was displayed on - package as special T6.5 wedge for yamahas, it operated satisfactorily.
[evaluation of goods] - it is cheap and these good products of availability are four stars.
View detail