Reviews
Cost-effective
[How is it used?
I am playing Enduro race etc. with HUSQVARNA TE250I.
The other day, when I washed my car after practice, my Uni-flow cap was missing, so I bought a ZETA Uni-flow cap.
Previously HUSQVARNAOEM, but this time we chose the readily available ZETA product.
Was the installation difficult?
The rubber part was very hard, probably because it was winter time, and I couldn't fit it right away without changing it.
I warmed up the rubber part with Dryer to soften it and put it on. Even after warming it up, it was still difficult to fit it in, but I put it on with a lot of effort.
After attaching, wrap Tie Wrap around the base to prevent it from falling off, just in case.
View detail
Looks and functions at the same time
I think it is good for the price and has a luxurious feel. View detail
Mounted on EC250
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
The Hose stuck in the Tank allows Gasoline to flow back into the HeadBike when it falls over.
In this case, grease around the Stem will drop, causing Rust and worsening Handling.
This cap is available in a lineup of different colors, and it is a good part with an easy customizable feel.
However, after two rides after installing it, it came off when I fell down somewhere or lost it.
I ended up buying a second one right away, also in tears.
View detail
The dignified appearance is atmospheric.
I use the IMSBig tank's OEM fuel cap, which does not have an arrowhead retaining mechanism, so no matter how hard I push it in, it comes off after 30 minutes due to the reaction force of the hose. The adhesive strength of the Aron Alpha is definitely ??????????. I like the way it stands up to the Chocolate. View detail
Valve for the gas tank cap.
Good quality, fixed the problem with fuel leaking from the tank when riding a motorcycle in the mountains. The tank was installed on the rear trunk rack. -------------------------------------------------- -------- Good quality, eliminated the problem of fuel leakage from the tank when traveling on a motorcycle in the mountains. The tank was installed on the rear tutorial. Powered by Google Translator View detail
Leaks.
Is it just my Motorcycle?
Fuel leaks if you roll or willy.
The Chinese one I used to wear on Yahoo!
Is the attached Hose Material not good enough?
View detail
One pointAccent and hidden features
I used it on a Yamaha YZ250 and the red Anodized Accent looks great on the blue chassis. I like it very much.
I have a hunch that the attached hose will come off because it looks like a non-shrinkable piece of PVC, but it doesn't really come off.
I took off one star because of the Image. I bought this for the following two reasons:(1) the grease is washed away because the stem bearing is not covered with gasoline, (2) the grease is not allowed to rust, and (3) the gasoline does not leak out. I bought it to prevent rust and prevent gasoline from leaking out. I am satisfied with it.
Sorry to add, the part somehow fell off and went missing during a Motocross practice run, I think the hose part should be for OEM.
View detail
Good vibes
It looks Refreshing nice!
I am a little concerned because there are many impresarios that it comes off immediately.
View detail
Completed replacement from OEM
The OEM Breeder hose was too cheap, so I replaced it with this one.:Since we replaced it with Aluminum, the texture has improved considerably. View detail
For Big tanks.
I put it on the lid of the Big tank I bought. Without it, Gasoline will overflow when the tank is tilted. View detail
Even with a long Hose,,, it leaks when it's turned over.
Originally my Motorcycle had a long Hose on the Tank cap and I didn't really feel the need for it.
However, I didn't realize the necessity until the machine was almost upside down when I mocked it on the hill climb.
This is necessary because Gasoline has been leaking even with a long Hose.
The hose that comes with it is much harder and sturdier. Although it cracks with age, it lasted for about 7 years.
View detail
easily dropped
[How is it used?
It was on the Machine that I purchased.
It's nice to be able to remove the Fuel Tank Cap without having to worry about a long Hose, but it's just too easy to drop.
It's so easy to drop that some people say you can pick it up when you're casing the JNCC, etc., without having to go to the trouble of paying Gold for it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I just put it on, but it is easy to come off and drop, so I use Aron Alpha for better retention. And I don't want to have to buy another one.
How was your experience with it?
Not only is the Gasoline cap easy to remove, but it makes a nice Accent and is cool.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As I mentioned in the installation section, it's easy to drop, so it's best to glue it in place.
View detail
Zita Uni-flow cap
It is easier to open and close than the OEM Hose, but you have to be careful not to drop it. View detail
If you don't use the right mounting method, it will come off easily.
Is it just me, or is the Hose falling out due to the pressure in the Tank?
It was off and down in the Garage a couple of times.
I had to figure out how to install it, and then it was gone.
I'd like to see them put a return on the Hose so that it doesn't fall out.
Why did they commercialize it? This is a product that makes you wonder.
No pictures because I dropped it somewhere.
View detail
Look good!
I replaced the NORMALFuel Tank on my KLX 230R with this Cap because it just had a RubberTube instead of a Valve and it didn't look good.
It's a One-Way Valve so Gasoline shouldn't leak out…
But if you warm it up with a dryer, the hose will soften and you can install it easily.
View detail
Is it a must for a fat bar?
I replaced it with a Fat bar and the OEMHose had nowhere to go, so I replaced it
The direct reason is this
At first glance, it looks like the tip of the Hose is blocked
There is a small hole on the reverse side of the end cap
The downside is that the Material of the Hose is hard and hard to plug in
However, if it is not inserted properly, it may come off while driving
It must be plugged in securely
View detail
It was torn off
The WR250X OEMTank with a ZETA Gas cap
I wondered if the Tank Bag would come with it, and after a while it was torn off!
I had no choice but to buy and install the Blue one
I couldn't remove the torn remnants even if I pulled it off, so I used Nipper
I made a mistake in the direction and the Z at the tip is N, but it's easy to install, just screw it in
I don't know how good it is because it's for bonsai, but I'm satisfied with it because it's a relatively noticeable part
View detail
I purchased it as a price adjustment for OEM Product purchase - - -
It might be surprisingly good.
Oil Resistant Hose which has been growing with Dollaran so far has become so short, Compact.
Basically I thought it was an Attachment, but I do not think that's the case.
Until now, at the time of refueling high octane, that long Hose was twisted and it was a big deal, but that would be gone by this.
Afterwards, I hope that it will fulfill the role when the temperature rises at the time of fall. (I just tried it and I have not tried it)
The price is a little as a practical item, there is a high impression.
View detail
★ZETAUni-flow cap
Recently, I improved my conversation about this Zeta Zeta Uni-flow cap.
The first time, at the KUSHITANICOffee breakmeeting venue there was the other day
For the second time, at the station on the way that we stopped by a break during Touring
In the conversation with the first meeting off car Rider, who happened to meet on a passing street, it was natural that the talk shifted from the flow of talk of how to do Fuel flow of Motorcycle's Fuel Tank to the Zeta Zeta Uni-flow cap.
After all, it appeared to be convinced that performance, ease of use and price of this ZETA Zeta Uni-flow cap was too adequate, and it turned out that this ZETA JITA Uni-flow cap is a very popular highly rated product.
However, you guys are not attaching this ZETA Zeta Uni-flow cap.
Everyone was not able to escape, it got lost, the experience of being stolen seemed to have been done and it seemed like a real intention to be disciplined.
That's right. I also had this ZETA Zeta Uni-flow cap attached to Fuel Tank Cap in the parking lot in front of Motorcycle part Shop twice, it is stolen.
This ZETA Zeta Uni-flow cap itself is a very excellent and small Fuel flow device, so I like it very much as I purchase it once, but I like it very much, but unfortunately it is stolen or lost It seems to.
In this way it turned out that the first car's off car Rider had almost the same experience, I felt even familiar with everyone while drinking the road station and Coffee and feeling familiar, became good friends with this Zeta Zeta Uni-flow cap story Was.
After all, when using this ZETA Zeta Uni-flow cap it is very good and stylish Parenthesis good Fuel flow device when it is premised that it does not leave from Motorcycle, but if you take your eyes off Motorcycle or take your eyes off Motorcycle It is surprising to know that it is a high Items of lost Demerit that it is not my own experience so far and that other people in the Large team have similar experiences and they sympathize with each other variously It is a fact.
After all, Fuel flow seems to deal with another way instead of this Zeta Zeta Uni-flow cap. (Already me)
.
View detail
Functional, required for Resin Tank
It is attached to IMSBig tank.
Previously, when installing inexpensive flow cap with Yahoo auction, internal pressure of Gas evaporation of resin Tank did not escape, Gas leakage occurred from PumpSeal surface.
I will also paste the heat-resistant cloth which sucked Gasoline and became licking - - -
Although it is Small Sana Parts, it is a functional item that was kitchened and there is currently no Gas leak.
It is an essential item for resin Tank.
View detail