Reviews
For protection of Stainless Steel Mesh Hose!
Stainless Steel Mesh Hose is attached to the Rear brake of RZ250R.
Hose clamp rubber is installed to protect the hose as it moves up and down.
Rubber is fixed with Tie Wrap.
View detail
protection
I bought more brake hoses to protect the hose in the clamp area.
I thought it was expensive for the price per 1pc.
I had a hard time to pass the hose.
View detail
Brake hose protection
I bought this to protect my Brake hose when I replaced it.
It's hard to put in, and the selling price is a little high, but I couldn't find anything better, so I just put it on and see what happens.
View detail
Convenient Small Things
Deterioration is faster compared to OEM!
If you are an OEM, you won't have cracks for more than 10 years.
View detail
buying up
I bought more to install to protect my Brake hose.
It will be attached to the moving, anti-scratch protection.
It would be great if there were multiple packs and more affordable sales.
View detail
For Brake hose protection
I bought this to protect my Brake hose and prevent scratches.
It's a little Large odd to put through without making a cut, but it's good for protection. I wish the price was a little lower or came in multiples.
This time, I bought it together to try the different Size.
If I can use it in a good way, I will buy more.
View detail
For scratch prevention and protection
I bought this to protect my Brake hose and prevent scratches.
I have to think about it when I install it, or Cut it and break it.
It would be helpful if the unit price was a little lower.
View detail
I don't know how to use it.
The Hose has a Banjo fitting, but it is not possible to insert it from the tip, so I cut it with scissors and inserted it into the Hose.
I used Tie Wrap to fix it in place so it won't come off, but I'm not sure how to use it.
・
The functional aspect is good because I was able to fix the Hose.
View detail
For brake hose
I bought this at the same time as the Clamp, but why it doesn't have a split is a mystery to me. I used it with Cutters. It is good if the one with the interruption is sold. View detail
Used in the installation of a mesh hose to a SEROW250
I used it to install the mesh hose to my SEROW250
It's a nondescript Rubber I hope it's a little cheaper
Banjo cut in with Scissors, combined with a Hose that can't be removed I tightened it up with Tie Wrap and then installed it on the car body So far it hasn't come off
View detail
A perfect fit for the OEM HoseBracket
The external shape was perfect for the OEM hose clamp!
As an afterthought, the Hose is already rubbed and Wound is already in
Why didn't I come across it a little earlier?
It's essential if you're going to mesh hose!
View detail
ACTIVE Hose Clamp Rubber
I want to share a review about the purchased product. This is the rubber hose clamp from ACTIVE. After replacing factory brake hoses with new reinforced hoses on which there were no rubber clamps. The old rubber clamps turned out to be very large. And I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. The goods are of excellent quality. Quick installation. I recommend . Thank you . View detail
ACTIVE Hose Clamp Rubber
I want to share a review of the purchased product. This rubber clamp from the company ACTIVE for brake reinforced hoses, which I bought for my SUZUKI. After the replacement of the factory brake hoses, new reinforced hoses appeared, on which there were no rubber clips. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. Goods of excellent quality. Quick installation. I recommend . Thank you . View detail
ACTIVE Hose Clamp Rubber
I want to share a review of the purchased product. This rubber clamp from ACTIVE for brake reinforced hoses. After the replacement of the factory brake hoses, new reinforced hoses appeared, on which there were no rubber clips. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. Goods of excellent quality. Quick installation. I recommend . Thank you . View detail
ACTIVE Hose Clamp Rubber
Hey . I want to share a review about the purchased product. This is the rubber hose clamp from ACTIVE. After replacing factory brake hoses with new reinforced hoses on which there were no rubber clamps. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. The goods are of excellent quality. Quick installation. I recommend . Thank you . View detail
The Hose clamp section is finished like an OEM (^_^)
【What made you decide the purchase?】
- I'd like to fix Mesh brake hose with NORMAL's Hose clamp
【How was it actually used?】
Purchased Hose clamp rubber 14 mm in outer diameter according to the inside diameter of Hose clamp.
Since I installed it after incorporating Hose, I installed it with a notch.
It installs so as to suppress it with Hose clamp, so even if there is a slit, it is used without problems.
Since NORMAL's Hose clamp can be used as it is, even after exchanging Brake hose for Mesh Type, the Hose clamp section is finished like an OEM (^_^)
【Mounting was difficult?】
It was not particularly difficult.
【Please tell me the installation point and hang】
If you install Hose clamp rubber before installing Banjo adapter in Hose, I think that it can be installed without cutting.
[Is there anything I was disappointed about?]
Nothing in particular.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think whether there may be a Type with a slit from the beginning.
【Have you compared items?】
Nothing in particular.
[Others]
It will be the Motorcycle that I used to ride, but it seems that ClampRubber here is still in use.
* "The 12th Impression Con test" (https : / / www. webike. net / campaign / 2017 / 11 / 20171201_impression_contest / ) I am writing Impre with reference to the Template that was prepared at.
View detail
Hose clamp rubber
When exchanged for Mesh hose I purchased because there is a gap when NORMAL's Hose clamp.
I noticed before ordering that there was multiple Size so I got the necessary Size without difficulty.
Quality etc. There is no problem, but the price is a bit expensive
View detail
It is convenient when saying when you keep a couple of standings
This usage was used for protection of Mesh brake hose,
You can substitute Vinyl Tape for Spiral Tube, but I used this to think about the appearance,
If it was the ReplicaBoom in the 1980's, even in a round winding with Tape as a first aid, a certain meaning bracket
Although it was good, in recent years it does not go so, a polite finish is required,
Usability is a product of Rubber, so it is easy to process with Cutter, and even if it fails it is not too regrettable
I think that it is good, because it is a product that is unlikely to be surprising, I am gratefully using it,
Depending on the ingenuity, you can use a variety of things The last time I used it for anti-vibration Rubber, but it works well.
There is something useful if you have it.
View detail
I think that it is necessary parts for OEM-like Custom.
【Purchase motive】 In order to change Brake hose before and after FAZER to Osage Edge line, I tried OEMHose and Edge line before replacement work, so I found out what I needed to match the thickness of OEM Clamp and purchased it.
[About installation]
Cutter cut the center part and pinched Hose. Even if you do not need glue etc. on the part you cut, there is no particular problem as it is clamped by Clamp.
【About Hole Size】
Because the thickness of Hose is 7 mm, 7. I made it to 5 Millimeter Size. It made this Size so that Brake hose can move up and down together with the movement of suspension.
[Others]
FrontX 2, Rear X 1 this time I thought it was expensive.
I aimed for OEM-style HoseLine so I think that it was good to match well with OEMClamp.
View detail
For GOODRIDGE's Brake hose
I installed it for Brake hose of GOODRIDGE. I applied CRC from Brake hose's Connector, screwed it in and attached it. I used 5 sets for 1 Set for 1 Vehicle with 7 mm inner diameter and 14 mm outer diameter. It is Just fit.. View detail