Reviews
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Just a board.
A board that can move NORMAL Chain Guard.
It is not Chain Guard.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
If you want to slide forward of Chain Slider, it is possible.
I bought this to slide the Chain Slider forward with the rear sprocket change.
The Guide is attached with the front two Bolts and secured to the Bracket with the rear two Bolts.
The Chain Slider will be on the inside of the bracket, so the clearance between the chain and the slider will be compromised. As you can see in the picture, the Chain Slider cannot be installed on the inside of the bracket, but on the outside.
As a Guard, I think it works well for impacts from the outside, but from below it's subtle.
View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
high
Why is it so expensive to just put something over OEMGuard …
If you make the wrong bolt length, you'll hit the Sprocket and you'll be in for a hell of a mess!
It was a rip-off
That's why Zita is …
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
It also looks different.
As we changed the number of Rear sprocket, we purchased it as necessary.
OEM Parts Number I think that appearance may also change with the shape covering the whole.
Current situation Rear sprocket uses 44 Ding.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
For the time being
Chain Guide will interfere with Chain if you change from Rear sprocket 40 to 42 in CRF 250L so I bought this item to move Guide forward. If this is installed inside Swingarm, Clearance next to Guide and Chain will be gone, so that Guide will be inside of Swingarm, Chain guard will be on outer side. I felt like holding the installation part of Swingarm. As we moved the Guide forward, Bolt on the front side has the same wall thickness as the attachment part of Swingarm Coloretc. We can not fix Guide and Guard unless we put in. Because it is a Universal Product, this area is unavoidable.
View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
It is a Custom-oriented Custom
Over the OEM Chain guard, BoltQuantity : It is a Custom that is easy to install with 2pc. It is the last Parts not customized around Chain.
It is the same Titanium color as ZETADriveGuard and it looks very good with no sense of incongruity.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Motorcycle gets a sense of quality.
I got lost a bit when I attached this Parts, but attached it without problems.
I think that it is very better than OEM's sense of plastic feeling.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Satisfied with the appearance
From the functional aspect as a Guard
There is also practicality
The appearance texture is very good above all.
Although I thought that the price was a little expensive, I bought it
When you see the attached car
I am satisfied that I bought it.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
subtle - - -
As shown in the picture of webick's Page, attaching it to the inner side of the installation bracket of Swingarm, the Chain guard will slip out and it will only be attached to the outside. Or would you cut and install Chain guard?
First of all, Material : Since it is attached to the outside of Plastic's Chain guard, will it be easier to ease the shock from the side. The rest is visible. I think that the price is slightly expensive. Recommendations are subtle ...
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Also used as Extension of Guide
【What made you decide the purchase?】
Along with Rear's Sprocket Large typing, I bought it as Extension of Guide and Guard of Guide.
【How was it actually used?】
Chain made contact with Guide when Sprocket was made into Large type, but it was saved because we can install Guide with Offset if we attach this part. I think that it is fine until about 44 Large bodies.
You can also use it as Guard of Guide. I applied it considerably hard, but it has not been broken yet.
【Was it difficult to install? (Hard parts case)】
it's simple.
[Is there anything I was disappointed about?]
There is none
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none
【Have you compared items?】
There is none
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
I was glad to have this
【What made you decide the purchase?】
We made Rear sprocket bigger than OEM, so it will interfere with OEMChain Guide, but if we installed this guide we could also install Offset and purchased it as protecting Plastic OEMGuide.
【How was it actually used?】
I've been hitting rocks several times, but Guide can be used without breaking.
【Was it difficult to install? (Hard parts case)】
It was easy..
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There are no similar parts.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Chain guard
It is Guard of Chain Guide,
Since I have many opportunities to run Off-road I bought it,
Although the purpose is Guard, it looks well,
We are also considering purchasing Guard of Others.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
For 45T introduction
I chose this for introducing Sprotcket 45T.
Although it seems like it can go up to 46T in the explanation, complete OffSpec. If it is Chain Dardal of 45T, I am touching under Guide.
However, because it is a form to be attached to the OEM, it is very good in terms of strength!
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Good vibes
Heel Guard and how to fit in Timing.
I think that you can see it, but it became SMART.
Easy as it is about 30 minutes with Heel Guard and Chain guard bracelet.
Although I think that Accent of Red should be attached somewhere, it is almost satisfactory item.
View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Chain guard Breath?
Generally, if you consider using OFF
A shape that surrounds Chain is desirable
But, at the SEROWOEM, only the exterior Pla Parts
It is a shape not attached.
So, full-fledged Spec. Not, but Gold exterior
It is on as if it is visible "Enjoy fashionable" like
I think it's Parts.
Installation also, ScrewQuantity : 2 pc was exchanged and the same place
Just add the Gold genus Plate and close it.
Because it is solid with Bolt on parts
Did you say that it was the biggest point?
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Thing is fairly large. Regrettable [ it is slightly uncool that one screw hole remains, and / if the screw thread is turned off, it can insert in also with a makeup Screw by bandage but ] in CRF250L, since it is not the peculiar part but a combined u
Thing is fairly large.
Regrettable [ it is slightly uncool that one screw hole remains, and / if the screw thread is turned off, it can insert in also with a makeup Screw by bandage but ] in CRF250L, since it is not the
peculiar part but a combined use Parts with a number vehicle type.
It was the highest when there were a Color alumite and a Hairline, although it was satisfactory in general.
Anxious, if it interferes with a little shock, since the but existing Guide in which
attachment is very easy is just before a Chain.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
As usual, the goods of DRC are quality! Design! etc!!! (etc ....) I think that it is perfect altogether. (Do only oiler [ ? ]?) It can be used satisfactorily at all and becomes smart. (Probably the total specifications of the portion there should
As usual, the goods of DRC are quality! Design! etc!!! (etc ....) I think that it is perfect altogether.
(Do only oiler [ ? ]?) It can be used satisfactorily at all and becomes smart.
(Probably the total specifications of the portion there should go up.) the joke & -- they are goods recommended to those who want to carry out custom.
PS -- although many, I think that it excels in cost performance if the comparison of the other company is carried out also in price.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
It searched to search. It investigated to investigation. It can attach also with what and CRF50!! It is tight to the attachment width currently recommended by sprocket guard attachment processing therefore set up as the option of the swing arm in
It searched to search.
It investigated to investigation.
It can attach also with what and CRF50!! It is tight to the attachment width currently recommended by sprocket guard attachment processing therefore set up as the option of the swing arm in G Kula.
I think that it probably becomes a future fashion.
Incidentally attachment of a photograph is a 12-inch wheel in the swing arm for apes.
In 10-inch attachment, although a guard is likely to say even Ho of a tire, if it is Ho who can manage the air pressure of a tire just, there seems to be no problem.
A super-recommend!!
View detail