Reviews
PMC Fender Eliminator Kit
I bought this because I liked the design of the Blinker, but it took a lot of time to install.
In addition, this processing was not done at all when the License Plate Light was installed, and I processed the plate by myself. If I don't do so, it doesn't fit well.
Was yours the only one that was off?
In addition, because License Plate Light covers Number rather, I opened a hole about 10mm below and installed it. Still, it is a feeling of covering.
It is perfect if the installation screw is Black.
View detail
A Ninja with a fender eliminator
Terrific! The part fits and matches as if it was an OEM Kawasaki part. The motorcycle should have been released with such a rear fender... It lightens the rear end and makes the motorcycle look like a fighter jet on the road: wild and healthy for the soul... The 80's are so good... View detail
Perfect
This kit fits perfect and have a very nice finish.. All nuts and bolts are included. I had no use of the building shame as it is in Japanese,but it´s a simple job... View detail
Fits: KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX
It attached to kz900 which was before Z1 of now.When it changes to z1, he is taking out the whole vehicles to trade-in, and repents.Since the position of a Number or a Tail lamp can be adjusted, it is a gadget thing which can be adjusted in accordance wit
It attached to kz900 which was before Z1 of now.When it changes to z1, he is taking out the whole vehicles to trade-in, and repents.Since the position of a Number or a Tail lamp can be adjusted, it is a gadget thing which can be adjusted in accordance with a Style.although it is probably troublesome for some persons since there is assembly work.Since
Fender-less specification is often seen, it has ridden by the specification which dares to leave a Normal fender.He buys this, if it is a Fender less kit again when getting bored with a Normal fender.But if this is attached, a Z will become like a ZEPHYR suddenly.
View detail
Although it was hung by the price and chosen, the exclusive use according to vehicle type was not suited, so that it could not consider. A screw hole needs to be processed for attachment. I think that it can attach more comfortably if the slotted
Although it was hung by the price and chosen, the exclusive use according to vehicle type was not suited, so that it could not consider.
A screw hole needs to be processed for attachment.
I think that it can attach more comfortably if the slotted hole is used from the beginning.
Although the appearance to attach is very much good, it is regrettable.
View detail
Fits: KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX
They are very satisfying goods. Since number plate attachment stay moves forward and backward, it is liking. Slender Z1R is further a stylish!
They are very satisfying goods.
Since number plate attachment stay moves forward and backward, it is liking.
Slender Z1R is further a stylish!
View detail
Although it had equipped with the fender less kit of the other company before, it was a neck that a tool box is not attached. Then, it investigated, judged in total and changed to the fender less like PMC. Moreover, I think that it is also the mec
Although it had equipped with the fender less kit of the other company before, it was a neck that a tool box is not attached.
Then, it investigated, judged in total and changed to the fender less like PMC.
Moreover, I think that it is also the mechanism of filling a crevice the car-body side, and invasion of splashes of mud or rain is also reduced.
Since permeation of water cannot be checked by a run or car wash of a rainy day, it checks after this.
Attachment is as a manual and was able to carry out easy wearing.
Appearance was also good with goods good in itself.
View detail
Fits: KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX
First, a good point. O O (attachment description was intelligible) appearance means which were easy to attach. A point [ that it is bad (already a voice!) ]. O Heavy O black was good. O If it moves although number migration should be able
First, a good point.
O O (attachment description was intelligible) appearance means which were easy to attach.
A point [ that it is bad (already a voice!) ].
O Heavy O black was good.
O If it moves although number migration should be able to be carried out, it will hit a tail lamp.
It is (this is a clear by small processing).
Usually, he completely has no problem to use.
He is smart.
Then, they are three stars.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
The circumference of rear one was shapely attached to the preparations Z1. It is surprised to open a box! The protective layer of wound prevention was attached to the parts of all the aluminum portions. There was also fine consideration and it was
The circumference of rear one was shapely attached to the preparations Z1.
It is surprised to open a box! The protective layer of wound prevention was attached to the parts of all the aluminum portions.
There was also fine consideration and it was the highest.
However, there is no part number in the photograph of an instruction manual, and I thought in beginner as it is more intelligible for a photograph to have a part number.
They were parts custom made very simply and happily about attachment.
笙ェ which became the touch which appearance may also feel refreshed
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
Although based also on liking, heavy touch of the appearance of a rear circumference is lost and it is felt refreshed. It is hard to throw away the plating fender of normal. Also when a product makes a hole later if needed by the sectional type ma
Although based also on liking, heavy touch of the appearance of a rear circumference is lost and it is felt refreshed.
It is hard to throw away the plating fender of normal.
Also when a product makes a hole later if needed by the sectional type made from aluminum, it is easy to give it, and its reinforcement is also enough.
Since processing of an end is whether it is not quite satisfactory, and is injured during attachment, or an open circuit of cables, such as the worst blinker, also occurs, it is merely necessary to tame with a file.
Moreover, since it will crack if direct attachment of the number plate is carried out, recommendation uses a number base etc. together.
Moreover, since the hole of a bolt has adopted the slotted hole in some places and the location of a tail lamp or a number can be adjusted, unlike the thing of the other company, a good place can adjust to oneself liking.
Fundamentally, structure is solid, and since PMC products are the touch which those who understand the thing of Z well are building, I regard them as there being not only this but many good things.
View detail