Reviews
buying a new one (esp. a new one in the same store)
I bought the wrong size, and went straight to the purchase shop. 。 I bought a new one. View detail
License Plate Protection
I had a Fender Eliminator and the License Plate was directly attached to it, so when I knocked over a motorcycle on a forest road, I was able to get a license plate for the Eliminator.
The License Plate is bent, due to the vibration of the Motorcycle, where the License Plate is on the Bolt.
I found out about License Plate Holders and purchased the DRC because it had a good reputation. When I put the holder on my motorcycle, I felt much more secure than if I had attached the license plate directly to the motorcycle. The color I chose was black, so it is not too much of a statement, but it is a nice feeling.
View detail
good
It's a good product, I'm using Black and the tanning on the Anodized is within acceptable limits. The thickness of the board is adequate, the rigidity is adequate and the accuracy is good. The NumberBody was safe, although this Holder was bent in the woods when it fell over. View detail
Recent Routine Parts
I bent the plate many times in the galley before, and it broke even more! After a new car, I was given an old one from a friend of mine and realized the need for these Parts, and I've been working on my car ever since It is always installed
Anodized Color also has an austere matte finish, with a texture and color that looks like a Flake or pancake paint job It's unique, it's not an obvious part, but it's different from the others
Furthermore, the same color of the accessory has a pretty good presence, though it's unlikely that anyone will notice it ..
As for installation, considering the use of off-road vehicles, the part of the claw is tight, some adjustment is necessary The material is aluminum, so it's not difficult Installation of the Plate is simply a matter of tightening the Plate with the correct torque
In addition, it is important to note that there is a lot of vibration in motorcycles such as Off-Car and SingleMachine etc For installation, we use lock nuts and anti-loosening agents to prevent them from falling off, just in case
The License Plate, which is easily distorted and bent without it, will always be neat is good, and if you look at the License Plate, you can see that the White By troopers have a good idea of the person He told me that he understands how I feel about my car
Well, there are a lot of strong people who say that the Off car's crooked Plate is a medal in the Galle field
Lightweight and solid parts in aluminum, plus the same color as the bolt nut with Collar, if it's something austere, these Parts are the best
View detail
Cospa high!
Previously, when purchasing this product series for WR 250 R, Screw and excellent design Spacer cheaply, Number Protective nail etc. , Texture and design was good, so CROSSCUB (Type JA45) I bought it for.
I bought it cheaply at the time of Sale and I chose Black because the car body is black and yellow color.
Initially, I thought that bordering was a little Large, but once I got used to it I thought it was not so.
I think that it was good to be Black.
It is recommended.
View detail
Plate No blow up
Unlike other companies' products, the surface has a satin-like finish,
I favor favorite not to insist too much.
Also claw the lower part of Cover, firmly holding the plate,
It does not produce unpleasant sounds due to shaking, and it can prevent cracking due to runout.
Since fixed Bolt and Aluminum Collar are honestly unnecessary,
There - I think that it would be even better if I could choose none.
View detail
Prevent bending of Plate
Pearskin Holder is painted anodized and texture is good.
It can also be expected to prevent Plate from being damaged.
There are times when claws for holding the plate are inserted too much, in that case Minusetc. Let's spread it out with.
View detail
For slight Dress-up and Plate protection
Car also appended the framework of License Plate so also Motorcycle.
However, I did not want to insist that I'm attaching! So I decided to Silver.
The surface is textured and painted.
The lower nail holding the Plate was just a good fit even without adjusting it.
I think that there are variations in dimensions on the Plate side so I can not say it unconditionally.
Since the edge is sharp, the License Plate may inadvertently touch and injure.
There is an effect that such anxiety can be alleviated if this is attached.
View detail
Pretty much
【What made you decide the purchase?】
It is a purchase thinking that it will prevent turning of Number.
【How was it actually used?】
Strength is Up and sense of security has increased.
【Was it difficult to install? (Hard parts case)】
It's easy if not fingering, but in my case it's Fender EliminatorStop lamp & STD Blinker so I shifted the mounting holes.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Just install it so that it will not interfere with Others' Parts
[Is there anything I was disappointed about?]
There is nothing in particular..
【Hope for Manufacturer - Please tell me if there are any improvement points】 It may be easier to install if Double-sided Tape is attached so that it is easy to install
【Have you compared items?】 nothing special
[Others] Any item
View detail
Somewhat luxurious!
I did not know the number of the Motorcycle, did not the corner turn around? I did not remember but I did not know why it was so many things I bought it for protection. I do not know what it is like luxurious, or a heavy feeling, but nice! View detail
I installed it for my ZX-6R 2015yr SE 30th memorial coloring model. The bike body color is lime green base with white and black portions. I wondered which color is the best for the license holder, and decided the silver. To be honest, any holder
I installed it for my ZX-6R 2015yr SE 30th memorial coloring model.
The bike body color is lime green base with white and black portions. I wondered which color is the best for the license holder, and decided the silver.
To be honest, any holder color would match.
In past, I bought same DRC license holder for a motorized bicycles Type-2, and I liked the quality. So this time I bought it at the same time I got the new motorcycle.
I don't need to even mention this but just to remind you that the license shape between motorized bicycles (Type-2 sometimes has the trapezoid shape) and over 126cc bike have a different shape, so be careful.
I think this is not just good for dress-up, but also effective to avoid mischief. Sadly there are little number of people bend the license plate in malice.
View detail
It is good for a Dress-up of a Motorcycle up exactly, and is a little cheaper than the Number plate holder of an original manufacturer's product, and, moreover, Nuts of special make follow. and we equipped for protection of a Number.Anyone is easy.
It is good for a Dress-up of a Motorcycle up exactly, and is a little cheaper than the Number plate holder of an original manufacturer's product, and, moreover, Nuts of special make follow.
and we equipped for protection of a Number.Anyone is easy.
View detail
It is easily united with an own Image color, and I think that texture and structure are also good. I think that conspicuous position, therefore easy Dress-up effect up are also acquired and purchased, and there is no loss. ♪ recommended to the
It is easily united with an own Image color, and I think that texture and structure are also good.
I think that conspicuous position, therefore easy Dress-up effect up are also acquired and purchased, and there is no loss.
♪ recommended to the friend
View detail
[Webike Monitor] It was disagreeable that the flesh side of the Number could be seen, and it purchased. Although the portion of the pawl holding the Number was crushed for a while, it started and attached with - Driver.
[Webike Monitor] It was disagreeable that the flesh side of the
Number could be seen, and it purchased.
Although the portion of the pawl holding the
Number was crushed for a while, it started and attached with - Driver.
View detail
a Dress-up of the circumference of back up -- it purchased.Although the Number plate holder of other Manufacturers has many things whose attachment Bolt washer is not painted, a washer is also the same color at this price, and this product is very inexpen
a Dress-up of the circumference of back up -- it purchased.Although the Number plate holder of other Manufacturers has many things whose attachment Bolt washer is not painted, a washer is also the same color at this price, and this product is very inexpensive. View detail
(Webike Monitor) Although he saw and bought an Impression that red suits unexpectedly, it is a surely very good color. A rather dark blue Motorcycle is suited very much.
(Webike Monitor) Although he saw and bought an Impression that
red suits unexpectedly, it is a surely very good color.
A rather dark blue Motorcycle is suited very much.
View detail
Since the Number plate bent when it fell at the time of an off-road run, it purchased. The same blue as a car body was purchased. Since the Plate and the Washer of the same color are also attached, it is very conspicuous. He is smart.
Since the Number plate bent when it fell at the time of an off-road run, it purchased. The same blue as a car body was purchased. Since the Plate and the Washer of the same color are also attached, it is very conspicuous. He is smart. View detail
Although fender-less-ized, since the silencer had worn to the half number, it attached for number protection. Since the flue gas of the silencer itself is uncanny, the number is somewhat black, but there is no damage to a number.
Although fender-less-ized, since the silencer had worn to the half number, it attached for number protection.
Since the flue gas of the silencer itself is uncanny, the number is somewhat black, but there is no damage to a number.
View detail
The appearance of RIA can be dressed up easily. A price is also cheap and the custom parts bought for the very first are this. However, as a point to worry, saying [ that the washer (fellow with a color) of a thread part will damage a number plate
The appearance of RIA can be dressed up easily.
A price is also cheap and the custom parts bought for the very first are this.
However, as a point to worry, saying [ that the washer (fellow with a color) of a thread part will damage a number plate ] and the thing which I purchased had the narrow difference width of the lower clip, and since a number plate did not enter, it extended and equipped only with a few by the slotted screwdriver.
View detail
An aluminum license plate holder. (Red) Matching with the (^O^) /fender less attached to CB1300SF is also well pleased with the aluminum spacer of a holder and the same color (--笙ェ stainless bolt is attached, and since anodized processing is carried o
An aluminum license plate holder.
(Red) Matching with the (^O^) /fender less attached to CB1300SF is also well pleased with the aluminum spacer of a holder and the same color (--笙ェ stainless bolt is attached, and since anodized processing is carried out, a holder).
There is also no fear of being rusted and I think that it can use for a long time.
They are items of a recommend at a dress-up group up (^-^)
View detail