Reviews
I like the color.
This is my first ReturnRider in 8 years, but I have been using DRC mono for a long time, so this is a Repeat purchase.
I love the texture and color.
However, you should be careful not to widen the claws on the bottom side, otherwise the Wound will get into the edge of the License Plate.
(I actually inserted it without expanding it, and when I removed it, it had a Wound in it…)
Currently I am using only the color Washer and Bolt because they interfere with the Fender Eliminator Kit that I installed separately.
View detail
For License Plate protection in off-road driving
good point
・ Corresponding to Notification No. 1266 of the Ministry of Land, Infrastructure, Transport and Tourism.
Looks pretty sturdy.
A bad point
Not much if you can justify the price.
For License Plate protection in off-road driving
Stainless bolt and aluminum spacer are included.
I was able to co-tighten with KIJIMARearReflectorFrame.
Please let me know if you use the Fender Eliminator Kit and run off-road.
View detail
Paint is weak
The paint feels weak. The color is beautiful, but the paint is weak and even the slightest thing seems to scratch it. View detail
buying a new one (esp. a new one in the same store)
I bought the wrong size, and went straight to the purchase shop. 。 I bought a new one. View detail
fashion-conscious
Effective for protection of license plate and for press-up.
The included stainless steel bolt is rust-resistant, and the matching color of the Holder is one of a kind.
It also looks good.
View detail
License Plate Protection
I had a Fender Eliminator and the License Plate was directly attached to it, so when I knocked over a motorcycle on a forest road, I was able to get a license plate for the Eliminator.
The License Plate is bent, due to the vibration of the Motorcycle, where the License Plate is on the Bolt.
I found out about License Plate Holders and purchased the DRC because it had a good reputation. When I put the holder on my motorcycle, I felt much more secure than if I had attached the license plate directly to the motorcycle. The color I chose was black, so it is not too much of a statement, but it is a nice feeling.
View detail
Mounted on PCX160
I bought this to protect my license plate and dress-up my new car.
I had to widen my nails to get the Number in when I installed it, but other than that it was fine and took about 10 minutes to install.
The texture was also Matte pearl and luxurious.
The Plate will make it stronger and prevent the Number from being bent by mischief.
I didn't use the supplied Bolt stuff, I bought it separately.
View detail
good
It's a good product, I'm using Black and the tanning on the Anodized is within acceptable limits. The thickness of the board is adequate, the rigidity is adequate and the accuracy is good. The NumberBody was safe, although this Holder was bent in the woods when it fell over. View detail
Recent Routine Parts
I bent the plate many times in the galley before, and it broke even more! After a new car, I was given an old one from a friend of mine and realized the need for these Parts, and I've been working on my car ever since It is always installed
Anodized Color also has an austere matte finish, with a texture and color that looks like a Flake or pancake paint job It's unique, it's not an obvious part, but it's different from the others
Furthermore, the same color of the accessory has a pretty good presence, though it's unlikely that anyone will notice it ..
As for installation, considering the use of off-road vehicles, the part of the claw is tight, some adjustment is necessary The material is aluminum, so it's not difficult Installation of the Plate is simply a matter of tightening the Plate with the correct torque
In addition, it is important to note that there is a lot of vibration in motorcycles such as Off-Car and SingleMachine etc For installation, we use lock nuts and anti-loosening agents to prevent them from falling off, just in case
The License Plate, which is easily distorted and bent without it, will always be neat is good, and if you look at the License Plate, you can see that the White By troopers have a good idea of the person He told me that he understands how I feel about my car
Well, there are a lot of strong people who say that the Off car's crooked Plate is a medal in the Galle field
Lightweight and solid parts in aluminum, plus the same color as the bolt nut with Collar, if it's something austere, these Parts are the best
View detail
To retain shape of License Plate
I got caught at a galley and the License Plate crooked
Seal of the mandatory vehicle liability insurance is peeled off, if you do not do it well, the inspector
I bought it by being called out.
Fine enough, it is strong and so far License Plate has shape
I can keep it..
View detail
Cospa high!
Previously, when purchasing this product series for WR 250 R, Screw and excellent design Spacer cheaply, Number Protective nail etc. , Texture and design was good, so CROSSCUB (Type JA45) I bought it for.
I bought it cheaply at the time of Sale and I chose Black because the car body is black and yellow color.
Initially, I thought that bordering was a little Large, but once I got used to it I thought it was not so.
I think that it was good to be Black.
It is recommended.
View detail
Plate No blow up
Unlike other companies' products, the surface has a satin-like finish,
I favor favorite not to insist too much.
Also claw the lower part of Cover, firmly holding the plate,
It does not produce unpleasant sounds due to shaking, and it can prevent cracking due to runout.
Since fixed Bolt and Aluminum Collar are honestly unnecessary,
There - I think that it would be even better if I could choose none.
View detail
Prevent bending of Plate
Pearskin Holder is painted anodized and texture is good.
It can also be expected to prevent Plate from being damaged.
There are times when claws for holding the plate are inserted too much, in that case Minusetc. Let's spread it out with.
View detail
For slight Dress-up and Plate protection
Car also appended the framework of License Plate so also Motorcycle.
However, I did not want to insist that I'm attaching! So I decided to Silver.
The surface is textured and painted.
The lower nail holding the Plate was just a good fit even without adjusting it.
I think that there are variations in dimensions on the Plate side so I can not say it unconditionally.
Since the edge is sharp, the License Plate may inadvertently touch and injure.
There is an effect that such anxiety can be alleviated if this is attached.
View detail
PlateHolder
There was no installation problem.
I heard that such Plate installation to Number is prohibited but I heard that forest road etc. It would be better to prevent bending by falling in
View detail
Purchase DRC company's PlateHolder 126cc
Material firmly for price : Aluminum is Large Variety satisfying item!
Other people are also mentioned in Impression, but claws of holding down when narrowing the License Plate are narrow. Therefore I have to open it a little with Slotted screwdriver etc and Plate will not enter deeply properly.
Material : It is easy to bend because it is Aluminum Adjustable without any problem I think that anyone can do it.
I was able to install it although it was Limit to contact Rear brakeLight Cover. (Us CB400four97 year type)
I think that it is not a problem with most Motorcycle.
View detail
OFF for cars DRC
Since the Holder I used before was broken, I tried it as a Holder of DRC used by Fabi Friend.
Although there was Anodized Finishing in the item explanation, it looks like it looks like finish like chiyimi painting and has a heavy feeling, it is a firm build.
Since the part sandwiching the Number of the lower side was narrow and Number did not enter, it was necessary to widen a little.
It is nice to have Aluminum 's Washer but thankfully there is a feeling that it is getting a little bit too elaborate so it may be nice to make it simple and make it cheaper.
Also, although Self-lock's Nut is Good, it's OK if Washer is added to the OEM Resin Fender Level, but Bolt is a bit short.
View detail
It looks nice..
I purchased Red according to the body color.
This product was chosen for color - Material - From Number
Because it is a little Large, the frame is attached at the stage where Number is attached
I chose it because Contrast is good..
For TRIAL cars, we chose products that seem to be light because the sturdy products are defective.
The point to worry about is that the folding of the frame is deeper and in the case of 2Cycle cars, since oil smoke is attached, cleaning seems to be a little Large strange but it can not be helped to give strength.
View detail
Pretty much
【What made you decide the purchase?】
It is a purchase thinking that it will prevent turning of Number.
【How was it actually used?】
Strength is Up and sense of security has increased.
【Was it difficult to install? (Hard parts case)】
It's easy if not fingering, but in my case it's Fender EliminatorStop lamp & STD Blinker so I shifted the mounting holes.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Just install it so that it will not interfere with Others' Parts
[Is there anything I was disappointed about?]
There is nothing in particular..
【Hope for Manufacturer - Please tell me if there are any improvement points】 It may be easier to install if Double-sided Tape is attached so that it is easy to install
【Have you compared items?】 nothing special
[Others] Any item
View detail
It does not match the Y's Gear's License Plate
I do not want to see the Reverse side of Number, purchase Black
However, I could not attach to License plate Holder of Y's Gear.
I installed the hole and forcibly installed it..
If you are wearing Y's Gear's License plate Holder, you should purchase another Holder.
View detail