Reviews
Easily change colors.
It is easy to change the color to match the car body color.
It is a general offfor vehicle shape, so changing the color does not affect the operability of the vehicle.
View detail
Colorization while open ended
The grip was replaced with an open-ended grip in conjunction with the installation of a hand guard with a fixed grip end, so the color was matched to the vehicle body color. View detail
Slip-resistant firmly in hand
I used it for 10,000 km and bought the same product because the waffle pile was worn out. The price is reasonable and good. View detail
This is the only one I use.
I can't use any other Grip than this one anymore, probably.
The grip, gripping feel, and thickness are just right for my hand.
View detail
Softer and Grip better than OEM
I used to use OEM or zrta raceGrip, but when I combined my KLX250es with zeta cx bar mx412, the width was not enough.:Pair (for Left and Right) After much trial and error, I found that OEMGrip (Total length:12, 6mm) I thought that the width problem would be solved by adding a DRC Team grip, which is about 1 cm shorter than the DRC Team grip. Unfortunately, Black was sold out, so I bought Color:I purchased the Gray color, which is quite cool, and the narrow grip width is exactly the width I wanted for the Handlebar GripPoint, so I give it a hundred points.
Grip is a little softer than OEMGrip; slightly firmer than zeta raceGrip.
The durability, operation, and gripping force are probably somewhere between OEM and zeta raceGrip.
It's great because it's inexpensive and you can choose both open end and closed end.
View detail
Easy to operate even with muddy Gloves.
[How is it used?
After purchasing the vehicle used, we purchased a DRC-made Grip after hesitating between OEM and replacing the Grip that was already worn out.
We wanted a grips that could be operated securely even with wet or muddy gloves, as we also intended to use it for mountain activities.
Was the one you received as per Image?
I knew the design and comfort of the grip because it was installed on the vehicle of a friend who plays in the mountains, so the product was just as I had imagined.
Was the installation difficult?
All you have to do is remove the old Grip and install the new Grip you have just purchased.
If the old grips are sticking, they can be removed relatively easily by gently inserting a fine -driver between the handlebar and the grips and spraying some parts cleaner into the open space (or using an air compressor if you have the right equipment). (If you have the right equipment, you can also use an air compressor to remove the parts.)
After the old grips are removed, degrease the inner diameter side of the new grips and handlebar with parts cleaner, and after drying, apply a thin coat of RubberBond to the handlebar and insert the new grips.
Wait half a day to a day for RubberBond to dry and ride out.
How was your experience with it?
Like Yamaha's OEMGrip, it has an uneven surface on the waffle, making it easy for the user's fingers to catch.
Is it the difference in Material? Is it simply because they are new? I am thankful that the vibration is reduced so that my fingertips do not become numb (but not completely numb) even after long hours of driving.
Furthermore, since it is an open end type, it is very easy to install the handlebar guard without the need to drill the grip end by yourself.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) This is a Grip-only product of
[Was there anything that disappointed you?
Personally, I don't have any. The price is Reasonable and I would like to purchase Repeat when the current Grip I am using is due for replacement.
Other items that would be helpful
Point and hang of installation
Please install the RubberBond so that the waffle-like part is at the fingertip position when you ride.:Pair (for Left and Right) should be adjusted so that it is in just the right position.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual... Well, I don't think there is any problem because this product is so easy to understand that I don't think you need an Instruction Manual if you want to buy this product and replace it.
[Notes]
Although it is unlikely that you will make a mistake, the inside diameter of the grip for Right (Axel side) is different from that for Left, so please check carefully before installation.
[ITEMS TO BUY TOGETHER
Nothing in particular, but since the shipping cost for this Single Body alone is not included, it would be possible to purchase other items to make the total amount over 3,000.
[Opinions and requests to Manufacturer
Black and Orange at the time of writing the Review (July 8, 2023). Temporarily out of stock. instead of Discontinued. Is there an alternative product available?
If there are no alternative new products, please continue to sell them.
View detail
Easy to grip and non-slip
[How is it used?
I was considering replacing the OEM grips on my SEROW225 because they are worn out.
Initially I was hoping to use OEMGrip again,
A junior colleague was using DRC, so I copied him and decided to use DRC.
Was the one you received as per Image?
The juniors were using it and it didn't look any different.
And since DRC is cheaper than OEMGrip.
I tried this way.
How was your experience with it?
The DRC Grip is easy to grip and non-slip, which improves operability. Also, there is vibration, which is characteristic of off-road vehicles,
The Grip is soft, so it absorbs vibration and does not tire the hand.
One drawback is that the grips are soft, so the grips move even when stopped with a bond.
[Points to note]
Grip replacement is not a particularly difficult process, but 1.Use parts cleaner. 。 2.Remove at once with Air. The
I think it is common.
How did it compare to other products?
I dared to use OEMGrip, but I thought DRC was also cosmetically pleasing and easy to use.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Fine Slotted screwdriver, Parts cleaner, Air equipment, etc.
View detail
It's cheap and Grip, so if you're not sure, this is the one.
I bought Repeat because Grip is a consumable item and it's inexpensive. The design is simple and easy to use. If you have any doubts, I think you should just go with this one. View detail
When in doubt, take this one.
The price is inexpensive, simple, and the grip is good.
If you are in any doubt, I think you should just put this on.
View detail
OEM same etc. or a little Up
This is the first time I have tried DRC grips and they are quite good. The design is also to our liking, with no bumps on the top half.
I combined it with ZETA's Open end Throttle cone, but the length is JUST right.
View detail
Good hold feeling
It is comfortable to grip and I love it. Life is a little short because of the soft Material. View detail
So thin and easy to grip!
It is thin and easy to grip.
I used to use Bro Grip stuff, but then I happened to see it and tried it, and it's good stuff!
However, because they are so thin, they tear easily on rocks, and even the throttle tube inside is damaged.
It is not durable, but it is thin, so it is hard to raise the arm.
View detail
easy to grasp
The price is cheap and easy to grip, and the design is simple and I like it. View detail
Inexpensive and easy to use Grip
I bought this as a for replacement for my old Grip, which was getting a bit rusty.
As I have an Off bike (KLX250) with a hand guard, there are not many options for grips with an open end and short overall length, but I think this is an inexpensive and easy to use grip.
The construction itself is pricey, but I think it's just right for an Off car that will be used roughly.
I'm not sure how durable it is since I've only just started using it, so I gave it 4 stars.
View detail
Simple is Best!
Yamaha "XG250 TRICKER I replaced the Grip of the "Mere Old Man" with this product.
I looked for a lot of Off-roadGloves, but I decided on this Glove which is SUPERSimple and cosy.
The installation was done with Bond, not Wiring.
The pattern of the Grip part is complicated, so I adjusted the pattern before the Bond dried.
I chose the Penetrating type so that I can install the Hand guard.
I think it is possible to buy it in Stock because it is very cosy.
View detail
Cosmo!
Inexpensive, easy to grip, very good Grip!
Cospa is the best!
View detail
It's neither good nor bad
[How is it used?
Pro taper's Grip PILLOW TOP (https://www.webike.net/sd/1689515/) was out of stock, so I bought it for the time being until it comes into Japan.
The reason I chose it is because the end is Opening. That's all.
I usually play with the Enduro, so I have a closed hand guard installed.
When you install the Hand guard of Closed, you have to Cut the end of the Grip.
Although a special punching out device is sold from DRC or UNIT, I cut it with Cutter every time because it is a thing to buy it all the way.
I bought this Grip because the holes are open from the start, which saves me time and makes it easier.
Was the one you received as per Image?
It was harder than I thought it would be.
Was the installation difficult?
I applied SUPERX, which sticks to everything, inserted it wetly, and wrapped Wire around it!
How was your experience with it?
Half waffle, so Grip is good.
Also, the angle at which it is fixed? can be adjusted to reduce aggression to the palm of the hand by placing the non-protruding part on top.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly. It's cheap.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Wiring is a Large thing. When you turn it around, your arms go up.
View detail
So easy to grip and so cosy!
The pattern is different on the front and back of the Grip, so you get a great fit when you grip it!
Material is also soft, so you won't get tired even if you drive for a long time.
I think I'll be using this Grip again next time!
View detail
Good Cost performance
I bought the DRC Team grip because I plan to replace the grip along with the Handlebar replacement.
The part that hangs on the finger is Waffle type, so it seems to be easy to grip.
View detail
DRC Grip
I have used this item before. Re-ordered for GROM to keep spare.Colour black. Quality is fantastic. Fitment is perfect. Installation work is easy. Highly recommended item. View detail