Reviews
Since a flange part could not be used having been large when exchanging for the radial caliper of a brembo and it was a pure caliper bolt, M10x60 of the compact flange was purchased. The stainless bolt could not use having been fearful since the place
Since a flange part could not be used having been large when exchanging for the radial caliper of a brembo and it was a pure caliper bolt, M10x60 of the compact flange was purchased.
The stainless bolt could not use having been fearful since the place was just going to be in reinforcement, and since he did not like appearance, the taper cap bolt was made into this.
Since a hezagonal wrench can also be used very smartly since the head section is finished in cutting, and a tool can be properly used by a case, I think that it is very convenient.
When it was a bolt of titanium, it was a thing that it is better for there to be a problem of galling and to have carried out anodizing, but since he liked the color of the titanium raw material, he bought that of those without processing.
It may be better considering treatment, to buy having carried out anodizing.
Since it is a thing as a thread compound etc. are used exactly, that a screw lock agent must not be used, either when using those without processing, please take care.
Although I think that it is very a thing as a thing, a difficulty is a price too.
Evaluation was made into four stars at the point.
View detail
Lightness as expected
Someday I wanted to make Caliper Mount Bolt Titanium, and finally I could purchase it. I decided on Beta titanium of reliable JAPAN because Torque is a necessary part. Of course, there is no problem with installation, it is light as expected. You can also choose Color, but I made Works Pokkara No Color.
If the price is a bit cheaper, is it the best?
View detail
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two. Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm. We are treating the straight cap bolt made from beta titanium (anodizing) now. .
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two.
Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm.
We are treating the straight cap bolt made from beta titanium (anodizing) now.
.
.
.
In rare cases.
.
.
To a change of air.
.
.
Transformation of the pinch bolt is enjoyed.
.
.
The flange outside diameter of a bolt head is phi16mm like [ the compact flange hexagon head bolt made from beta titanium ] a cap bolt.
The hexagon-head opposite side is 12 mm.
Furthermore, the design of the two-step style which can also use an 8-mm hex wrench for the hollow of a bolt head becomes a delightful bolt.
Although the product here is a bolt of the design which becomes a two-step style of an inner hexagon head and an outside hexagon head, when using it as a pinch bolt of W650, it will be concluded using an inner hexagon head rather than conclusion using 12 mm of opposite sides of an outside hexagon head.
In that case, the hex wrench which is not in the best pole ball is needed.
The best hex wrench which can be purchased in Webike becomes a hezagonal wrench stick of made in Mytho Roy, the product made from PB, or the product made from TONE.
Furthermore, if it says, L shape hezagonal wrench stick with a ball point will become the optimal.
To the sentence end.
.
.
Decoration parts with larger impact of the improvement in appearance than a function!! Although it may be considered so,
As a matter of fact, road surface flattery nature and dumping become a linear by concluding cfc TOSASU firmly, and a degree of comfort, handling, and breaking are also parts which change to a direct impression.
although KATACHI of a bolt and the manufacturer of a bolt are an individual's liking -- conversion of a pinch bolt -- honesty -- it is effective -- ~.
View detail
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650. (1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-1005
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650.
(1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-10055-B),
Conversion through the aluminum spacer made from a kitaco (M10 and phi16 mm-H=3mm)!! (3) : When pure, the nut for center stands is concluded with the lock nut.
We applied the screw lock agent and did conclusion by the compact flange nut made from beta titanium.
I say why the bolt of M10x55 was replaced through the aluminum spacer made from a kitaco to the center stand stopper attached to the full exhaust for W650 made from a nojima.
It is for making flush (TSURAICHI) the bearing surface which a bolt and a center stand stopper touch.
Since the bolt bottom did not touch a center stand stopper uniformly even if it inserts M10 v in a direct, the aluminum spacer was used as a washer.
Therefore, bolt length was made longer 5 mm than the thing attached to a nojima muffler.
For details, I think whether it can judge by a picture.
Equalization of sidewall is a promise of bolt conclusion.
A normal function is not obtained, either, if a bolt and a nut do not obtain a flat-surface bearing surface by Kami who ties a certain individual.
The individual which equalization of the bearing surface has not accomplished requires a spacer or a washer.
If language is added to a picture.
.
.
The flange outside diameter of a titanium bolt is 16 mm.
The outside diameter of an aluminum spacer is 16 mm.
The outside diameter of a titanium flange nut is 16 mm.
With the above-mentioned parts, normal conclusion of the center stand stopper made from a nojima is attained.
All the intentions are the performance more than satisfactory!! Webike was got to know and the possibility of customization increased.
I borrow this place and am thankful to Webike.
Thank you Webike!!
View detail