Reviews
Sturdy and beautiful
[How is it used?
Used because the OriginalMeter of DT200WR was broken. used for DAYTONA's Meter installation.
Was the one you received as per Image?
More than as per Image. It was described as polished Stainless Steel, but it is just beautiful.Image-wise, the whole thing is on the shiny side of Polished Aluminum foil.
Was the installation difficult?
It was not that this part was difficult to install, but because we used DT's MeterMounting Bolt, we had trouble adjusting the Speedometer Cable routing to match the actual one. In the end, it is OK.
[Included Parts:were they on?
Included Parts:is not available.
[Was there anything that disappointed you?
Not at all.
Other items that would be helpful
View detail
Not only the installation performance, but also the satisfaction with the appearance is great!
[How is it used?
I installed this after my DT200WR Meter failed. I am very satisfied with the workmanship as expected!
Was the one you received as per Image?
It was not a straight Bracket, but a beautiful curved part! 。 Since it is a PRESS product, the texture of the back and front are different, but I don't mind.
Was the installation difficult?
Installation is not difficult because the bolt clamps the bracket and washer, but care must be taken to prevent the bracket from turning during the final tightening.
How was your experience with it?
Performance and beauty are as expected!
[Included Parts:were they on?
It is not original,
[Was there anything that disappointed you?
Not at all. 。 I was thinking of using Universal Bracket, but I am glad I did.
Other items that would be helpful
At first, It's Bracket, so it's a little expensive." I thought. Precision of workmanship, texture." And I'll be using it from now on. In terms of, I'm glad I bought it I am very happy to be able to help you. You won't regret it!
The appearance of the PRESS punching differs between the back and the front (gently/edgily), but both are clean, so this is not a problem.
View detail
It is good making
As for Screw's Pitch, it also fits Meter other than DAYTONA company.
Antivibration Rubber has thickness with color and protects Meter from damage due to vibration.
However, since the thickness of Color is so there are so, if the mounting Bolt on the Meter side is short, we can not close the installation Nut..
View detail
I was too far away.
I bought it for Speedometer Bracket and Symmetry. However, between Meter was too much, it became my favorite deep Pit ...
I made three stars for my convenience, but quality is no problem.
View detail
Cable Avoid interference
I bought it to prevent Cable interference of Headlight and Speedometer. The problem Meter cable interference was avoidable.
Bracket also has a moderate thickness, it is a stable Bracket without shaking even with vibration.
View detail
I wanted Offset & bending.
Originally Tachometer was set up at the company's without offset & without BentBracket.
Purchased Offset & 10 ° bending as it was not in a very good condition, because it was tilted diagonally to contact Bikini cowl and difficult to see because there was no bend. It was able to be shaped quite similar to the ideal.
For vibration isolation, I can not compare because I have never used any other Meter Bracket, but I think that it is not bad as Meter can be viewed normally.
View detail
DAYTONADAYTONA Meter Bracket with Vibration Absorption
Mounting of Posh made Mini meter Because the angle is not attached to Bracket, we attached eccentric type bending angle of 10 degrees of this DAYTONA. Installation is mounted with BoltON, the turning angle is easy to see, there is also vibration prevention that does not let the GB vibration feel well though it looks well. Just price high.
View detail
It has attached with attachment of the Tachometer and Speedometer of a DAYTONA in general satisfactorily. In order to employ a pure Indicator efficiently, it attached using a 10-mm color.
It has attached with attachment of the Tachometer and Speedometer of a DAYTONA in general satisfactorily. In order to employ a pure Indicator efficiently, it attached using a 10-mm color. View detail
it can do glitteringly and is -- it is .
it can do glitteringly and is -- it is . View detail
Simultaneous purchase was carried out in order to attach the electric tachometer of a DAYTONA to the Handlebar of WR250X. I am carrying out bending of the Stay, in order to attach so that it may interfere in neither a Clutch-wire part nor a Front brake l
Simultaneous purchase was carried out in order to attach the electric tachometer of a DAYTONA to the Handlebar of WR250X.
I am carrying out bending of the Stay, in order to attach so that it may interfere in neither a Clutch-wire part nor a Front brake line.
Although there was thickness with a splendid STAINLESS STEEL and it was strong, it fixed with the vise, the Hammer struck with sufficient perseverance, and it adjusted the angle of bend.
Since the rubber cushion is set to
Meter attaching part, it does not have a problem, but a Rubber packing is put in between the Clamp attached to the Handle, and this Stay, and I am carrying out vibration proof processing.
Although it attaches and is 3000 km, there is no Trouble of a Stay part and a Meter part.
View detail
Since the mini speedometer and the tachometer were attached to the right and left of the handle upper holder bolt of the ape 100, extraction and insertion of key SW did, and since it was hot, the vibration proof stay of the offset was attached. A resu
Since the mini speedometer and the tachometer were attached to the right and left of the handle upper holder bolt of the ape 100, extraction and insertion of key SW did, and since it was hot, the vibration proof stay of the offset was attached.
A result is dramatically good.
(He is only one of the two for the time being) I think that the margin of a gap will come out if it replaces also with * right and left to an offset.
They are the goods in which construction material also has thickness and became brave by the product made from a stainless.
View detail