Reviews
I lost it, so...
The push rivet that stops the side cowl of YZF-R1 was lost, so I bought it.
SizeExactly.
I looked at the Touring and a little bit of the Circuit and had no problems at all.
View detail
Size did not match ADV150
It was meant for Honda, but it was not available because it did not match the size of the push rivet used on the ADV150.
I think it is a normal product for a push rivet.
View detail
Used for 250SL (Repair)
I bought a new Ninja 250SL… because I lost my push rivet at some point.
I purchased and used it. The quality is high and I can use it without any problem, but I still feel that it is rather expensive…
View detail
It can be easily fixed and released by simply pushing it in.
This product can be easily fixed and released by simply pushing it in. Good thing it comes in multiples, as they're prone to breakage! View detail
To Cowl.
I used it to fix Cowl.
It can be used if the hole diameter and depth match.
View detail
It's handy to have as a spare.
Push rivets are often used in Yamaha and SEA BASS, but they always deteriorate over time.
Parts are often broken when removing and removing them, or they become too habitual and difficult to reuse.
It's not expensive and I try to use a new one when it goes bad, but KITACO releases them by Manufacturer, which is very helpful.
View detail
They were the wrong size!
Trial and error for Grom's Custom It's not easy to get used to, but I'm enjoying learning a lot of things I'm not used to it, but I'm enjoying learning a lot of things I do this with admiration
However, due to the inexperience of the work, we often lose sight of the small parts and break them When removing the exterior of the grommets, some of the material:You have to remove the plastic grommet (like a Rivet) At first I didn't know how to remove it, and when you push the center part with a thin stick, the whole thing comes out But at this time, I had too much momentum, and the plastic part in the center of the plastic part flew somewhere
So I've been looking for the same part for a long time, but I couldn't find it, and finally I found it! I was surprised that KITACO prepared such a small item for me What a conscientious company! However, the parts I received are the same shape and function, but the size is different (for groms) It was much thicker than the original We-Big's web site alone has a lot of different shapes and sizes, and I'm not sure which ones fit I don't know if this is the best for HONDA I'd really appreciate it if there was a Guide like that, but for such a small part It's not easy to prepare Large strange to prepare
View detail
Purchase again for Stock
With this area Rivet, play is easy to come out when the three-prong is opened when you remove it like a photo.
Cowl's backlash was checked and all the open places were exchanged and became chitin, stocks were gone, so we ordered additional order.
View detail
Push rivet
【WebikeMonitor】
I replaced it because it cracks with aged deterioration.
It is recommended because it is cheaper than OEMParts.
We are collecting orders and putting in inventory of Parts
View detail
It is Rivet for Yamaha - -
When car wash of ZZr 1400 I noticed that Push rivet at the lower Left Side of Upper Cowl is gone. I planned to purchase OEM Product as soon as possible at a nearby shop but I found that PushBolt for each Manufacturer is out from KITACO and purchased it. Originally for KAWASAKI's thing 7 Pi thickness was the thinnest Size so I thought this was fine, but the shape and thickness did not match when I actually wore it.
I removed the PushBolt of Right Side and checked it, the shape was slightly different but the one with the thickness of 6 pie for Yamaha fitted well. It was a story of the shop and it was a Parts for Motorcycle for FOR JAPAN MODEL, so it seems there is a size that does not fit if it is a re-imported car.
I bought the other side Push rivet at the time of purchase and it was earlier if I looked for the same Size but it took twice the time I thought it would fit from the number display of Parts List.
This time, for KAWASAKI 6 Pie Size did not appear, so I think that I could substitute for Yamaha. From now on, it will be helpful if you get Push rivet for reverse car.
View detail
It was used as a substitute of the Clip for Cowl fixation of Honda VTR1000F (a Honda brand-name-parts 90683-GR1-003 Clip Body cover or 90683-MBW-003 Clip Body).While turning Honda brand-name parts with a Driver and removing, although desorption became
It was used as a substitute of the Clip for Cowl fixation of Honda VTR1000F (a Honda brand-name-parts 90683-GR1-003 Clip Body cover or 90683-MBW-003 Clip Body).While turning
Honda brand-name parts with a Driver and removing, although desorption became easy since this product separated when pushing in the central core, and the thread part might become foolish and might idle in brand-name parts, this does not have such a thing, either and user-friendliness is also good.
View detail
Although it is a serious, convenient Push rivet whose attachment and detachment are possible in an One-touch -- If it uses for a long time since construction material is a Plastic, it stops dividing and becoming useful. the Push rivet stops
Although it is a serious, convenient Push rivet whose attachment and detachment are possible in an One-touch -- If it uses for a long time since
construction material is a Plastic, it stops dividing and becoming useful.
the
Push rivet stops a Cowl, a Cover, etc. of a SKYWAVE -- alike -- if it is divided since a nail will break if it is used mostly, and it tries to use about, removing several times, he is trying to exchange
Merit well direction it considered the
Push rivet as consumable goods (^u^) Since a price is also cheap, the Push rivet (three-piece Set) made from the
KITACO.
It will purchase, if it sees in Schopp, and he is trying to always stock several pieces in a house (^-^) The
Push rivets are multi-use parts found useful in the Maintenance groups of removing Cowls well, in order to maintain.
View detail
It purchased as an object for repair of the Push rivet of the first GSX1300R HAYABUSA of '99~' 07. Since it was the plastic part, it deteriorated over time and ordering brand-name parts also took time, the equivalent article was found easily.
It purchased as an object for repair of the Push rivet of the first GSX1300R HAYABUSA of '99~' 07.
Since it was the
plastic part, it deteriorated over time and ordering brand-name parts also took time, the equivalent article was found easily.
Similarly attachment neither
form nor a function satisfactorily. [ a pure thing and ]
Since it is entering three piece although it is 105 yen in
one-piece conversion, and a required number is not suited, although the remainder will remain, it can be kept to future repair.
View detail