Reviews
Flashing installation
Purchased as a Spacer because the Blinker turns up
It might have been a safe win, but it turned out to be in front.
View detail
A wide variety of size variations to choose from
Multiple patterns of OD, ID, and thickness are available for use in various places.
This time Webike had M10Size in stock and I was planning to purchase other products, so I bought it as well.
Size, texture, etc. are perfect.
It was a great help because it was a hassle to go all the way to the Motorcycle supply store to buy the Size, which was not available at the nearby Home center.
It is not worth the hassle and cost to select and buy each Size, so if I wanted, I would have to pay 3,000 yen for a Quantity that contains multiple items and is less expensive.:I wish I had a Set product.
View detail
Used as Spacer for Exhaust System
When I buy a used external exhaust system, it may not have the spacer or bolt I need, so I buy it when I need it. It is very helpful that there are various sizes. View detail
I'm glad we have this.
I needed two of them and they were just sold in two-packs, which was a big help.
Used for engine slider installation process.
The areas used are as shown in the photos.
View detail
Outer Diameter Size is helpful
I have purchased a different size before, but this time I needed something other than the one for my motorcycle and was looking for something with an outside diameter of 25mm or more and an inside diameter of 10mm, so I was very pleased with your help.
I see that they are available in a variety of thicknesses. It would be great if they were a little cheaper, but …
View detail
Used for SilencerOffset
[How is it used?
When I installed RSV's Silencer on D Tracker, the exhaust was interfering with the License Plate and making a strange noise, and the exhaust was making the License Plate dirty.
Was the one you received as per Image?
It is an Aluminum tube as you see it.
Was the installation difficult?
Basically, I just put the Spacer between the Silencer Bracket, but I need to get the balance for offset on the entire exhaust pipe, so I need to make sure that the Bolt and Nut of each joint of the exhaust pipe, including the Cylinder attachment part of the exhaust pipe, are in place once. The silencer was lightly loosened, and the silencer was offset 20mm outside the vehicle body to prevent excessive force from being applied to a single point.
How was your experience with it?
As expected, the exhaust interference was eliminated, the noise disappeared, and the License Plate was no longer dirty.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
KITACO's ConveniencePartsSeries is very useful, but a lower price would be helpful.
Other items that would be helpful
Point or hang of installation:If you try to offset the silencer part alone, excessive force will be applied to a single point, leading to damage in the long run.
View detail
Thickness Size is abundant and ○
I purchased this product to adjust the position of the Bolt where the Exhaust System is installed.
The surface finish of aluminum is worse than that of Posh, but the outer diameter is slightly larger. (Posh21.6 KITACO22.0)
The variety of sizes is also very helpful because you can choose according to your needs.
View detail
I'm not very good at finishing or anything.
Pulling a lathe by myself is a pain in the ass!
It's helpful to have these things on sale when I'm in a bit of a bind.
Sometimes I wish I had a few more thicker lineups, but I'm just thankful that they have this stuff available as a ready-made product.
Every time I use this kind of thing, I think to myself that I should thank the Manufacturer before I complain about anything.
View detail
Anyway, it is a goods in time.
This KITACO's ConveniencePartsSeries is a good enough for anyway.
Size suitable for the gap is so abundant that I always buy Washer, Color etc.
The appearance and the material are very beautiful with Aluminum.
View detail
Size
I struggled to find Size. I was looking for M12's ColorWasher, but because I could not find it, I bought this item of M10. Because it is Aluminum it is easy to process and you can also Anodized. View detail
Sus Setting
I bought to hang Pre-road on Spring of Front suspension. Originally I used several Washers in layers.. The opportunity to release Front fork is twice a year at most, but WasherSpec. It was troublesome to organize it, but thanks to this Spacer I got easier.
View detail
A handy guy in a small gap
I used it to install Exhaust System Slider.
It fits perfectly with the dimensions assumed because processing accuracy is good.
It is Large strange to search because there are many types, but it is safe to have it without it, so it is safe to say that these are being properly sold.
View detail
Used to extend Skid Pad
Although I thought to divert Skid Pad for other models, when I installed it, the engine is projecting beyond the tip of the Pad.....
I searched Net for a way to master it, encounter this product. You can use this guy.
It is mere Aluminum Spacer, but it is likely to be used for various purposes only with good processing accuracy, simple.
Also, if you want to add something strange, you might want to add more.
View detail
Caliper support and Caliper Clearance secured
When Caliper was installed in Caliper support made by One-off, Caliper and Support interfere somewhat and it was not able to install properly. As a result, we purchased 2 mm of Color, and it was possible to install it securely and without interfering.
Webike is very convenient because Small items such as Bolt and Color can be ordered easily without hesitation.
View detail
To Sub FrameRear
To sandwich Active's Oil Cooler Mounting Bracket in Sub Frame of the same Manufacturer RearQuantity : Pair (for Left and Right) I bought it because 3 mm Spacer was required. Parts worn on invisible parts but very cheap, Quantity : 1 Set of 2pcs. Set! Is necessary enough. View detail
[Webike Monitor] It was used for extension of a Blinker. The outside diameter also became as the Image small. Since there is nothing to a general Home center, it is saved. Since a mailing cost will start if you buy it individually, something and one cl
[Webike Monitor] It was used for extension of a Blinker. The outside diameter also became as the Image small. Since there is nothing to a general Home center, it is saved. Since a mailing cost will start if you buy it individually, something and one clue are Recommendations. View detail
Although ages took pains to look for the Spacers of the Size of choice, they have various Size Lineups and are very convenient. Although there is a feeling of a comparatively high price a little, the pay to search for is considered.
Although ages took pains to look for the Spacers of the Size of choice, they have various Size Lineups and are very convenient. Although there is a feeling of a comparatively high price a little, the pay to search for is considered. View detail
The webike Monitor Muffler was changed to the set, and it purchased together with 30 mm as the Muffler band of a Silencer fitting volt, and a Spacer between Frames. Form and quality are both satisfactory at all.
The webike Monitor
Muffler was changed to the set, and it purchased together with 30 mm as the Muffler band of a Silencer fitting volt, and a Spacer between Frames.
Form and quality are both satisfactory at all.
View detail
It was a spacer of the size just which was just being looked for. Although it was after preparedness that I also have you manufacture by an honest one-off, it is a lineup of considerate accessories. Although quality is also truly small bad, it is
It was a spacer of the size just which was just being looked for.
Although it was after preparedness that I also have you manufacture by an honest one-off, it is a lineup of considerate accessories.
Although quality is also truly small bad, it is the one highest article.
I think that the direction troubled by the fitting of parts looks at the convenience parts of the kitaco once, and there is no loss.
View detail