Reviews
Instead of Washer
It was used as a Spacer when installing GIVI's Carrier.
I usually use a 6mm washer on top of a 6mm washer because it is a hassle to measure the size and prepare a spacer, but since I drop it every time I do maintenance, I replaced it with this product to improve serviceability.
It's just an ordinary Spacer, but it's nice to be able to choose from several sizes and thicknesses, etc.
From a functional standpoint, stacking Washers is sufficient, but this is a good product for those who care about appearance and serviceability.
View detail
Thank you for all your help.
I use it all the time.
Thank you again for your assistance.
Sometimes the stock is low at nearby mass retailers, etc., so Webike helps me out in such cases.
View detail
Lineup of other materials would be better.
I purchased this spacer to connect the shift arm to the GEARShiftClamp when installing an external footpeg kit on my NSR250R MC21. I really wanted a Brass spacer, but they didn't have any, so I went with an Aluminum spacer. View detail
justification
Used for adjusting the position of the Rear Sets and for fixing Spacer.
The size and thickness choices and reasonable price are very helpful.
View detail
RequiredParts.
I bought this because I didn't want to stack my Washer. It looks great and Refreshing. View detail
To the skimmer.
This is the kind of Parts that can reach the itchy spot. View detail
Used as a color for Caliper
Because the Rotor of RADIAL CALIPER was made Large, Caliper's You can use this collar in the Bolt section to fit a Large diameter Rotor. I'm ready! These colors are very useful. View detail
Purchase
Because Clank master's Tank is likely to come in contact with Inner cowl, we secured Clearance with this Aluminum spacer and made interference prevention. KITACOConvenienceParts are rich in kind and saved. View detail
KL 250 Sherpa's Rear brake reservoir for fine adjustment of tank position
【What made you decide the purchase?】
In SUPER SHERPA, Rear brake reservoir Tank is close to Exhaust pipe, Diaphragm heat, Diaphragm reservoir tank deforms and there is a chronic disease where Fluid leaks.
Although countermeasures are available from Manufacturer, in order to reduce the influence of heat even a little, buy this product to keep the position from the Exhaust pipe away.
【How was it actually used?】
It is an ordinary M6 Spacer with an outer diameter of 18 mm and a thickness of 5 mm.
However, because there are not so many Spacers of Size like this, I appreciate KITACO who lineup many products that can reach itchy places.
【Mounting was difficult?】
It is easy because it just removes Screw of M6.
【Please tell me the installation point and hang】
Be careful not to skew the reservoir tank when removing the Screw stopping the reservoir Tank because air may get mixed in.
[Is there anything I was disappointed about?]
It was possible to keep it away from the Exhaust pipe by 5 mm and I felt that I fulfilled the goal! Hey, Hose interfered with Frame.
Although it seemed not to be pressed strongly, since it is possible that Hose may hurt due to vibrations etc. I removed it crying.
I wonder if it was 3 mm?
【Hope for Manufacturer - Please let me know if you have any improvement points]
None
【Have you compared items?】
None
[Others]
Frequently check the reservoir Tank and if there is any abnormality in appearance it is only necessary to exchange...
View detail
Was it more reliable than Washer?
I bought it as a substitute in the place where 3 sheets of polycarbonate Washer of 1 mm are used repeatedly. After all, Aluminum thinks it is a good product because it is perfect. This is cheap, I wish I could have bought it.
Since Washer does not cost 100 yen on 10 sheets, it is expensive compared to it, but it is well MotorcycleParts so it is rather cheap.
View detail
KITACO's Spacer
It is Spacer of KITACO.
Since there are various Size, you can choose Size that suits your purpose.
1pc in number difference. Set or Quantity : 1 Set of 2pcs. It is appreciated that you can change the set you buy with the number you want because there are things of.
View detail
KITACO's Spacer
It is Spacer of KITACO.
Since there are various Size, you can choose Size that suits your purpose.
I purchased Car for Akira for Axel Pedal, but if I buy an OEMOP item I will do it more than 2000 yen, but in this case it fits within 500 yen.
View detail
If there are something and a Spacer, they will be saved. Since Washer pile can respond and appearance and maintainability are bad, I would like to use a Spacer with and a beam Size. It was used for attachment of an external Speed sensor and pos
If there are something and a Spacer, they will be saved.
Since
Washer pile can respond and appearance and maintainability are bad, I would like to use a Spacer with
and a beam Size.
It was used for attachment of an external Speed sensor and positioning this time [
].
View detail
If there are something and a Spacer, they will be saved. Since Washer pile can respond and appearance and maintainability are bad, I would like to use a Spacer with and a beam Size. It was used for attachment of an external Speed sensor and pos
If there are something and a Spacer, they will be saved.
Since
Washer pile can respond and appearance and maintainability are bad, I would like to use a Spacer with
and a beam Size.
It was used for attachment of an external Speed sensor and positioning this time [
].
View detail
It purchases aimed at obtaining [ at the time of attaching an Aftermarket parts ] a Spacer. The Size is set up finely and it is found useful.
It purchases aimed at obtaining [ at the time of attaching an Aftermarket parts ] a Spacer. The Size is set up finely and it is found useful. View detail
In the case of various attachment, it becomes that color certainly wants except a Bolt on parts. When I attach the external article Muffler of other vehicle types, I make a Stay bite and have had thickness balance-of-accounts doubling let it us
In the case of various attachment, it becomes that color certainly wants except a Bolt on parts.
When I attach the external article Muffler of other vehicle types, I make a Stay bite and have had thickness balance-of-accounts doubling let it use.
* as for which ♪
accuracy of dimension and intensity subdivision sale is glad also for it searching by
Internet-order sales at Size imitation, and I also want it to continue to continue in inside with entering [ much ] 100 piece it, and which are Serieses can also use them for a cinch feeling easy [ it ]
View detail
O If you think that he wants the color of O size, the catalogue of kitaco convenience parts will be seen for the time being. A size needed is found mostly. A size is dramatically abundant, and since the size notation also appears finely, it is dra
O If you think that he wants the color of O size, the catalogue of kitaco convenience parts will be seen for the time being.
A size needed is found mostly.
A size is dramatically abundant, and since the size notation also appears finely, it is dramatically useful.
Since the number of entering is also 1~2 pieces, it is hard to come out of remainder.
Since quality is also satisfactory, when troubled, they are convenience parts of a kitaco.
View detail
It is the comparison with the aluminum collar by P company which was being used until now. The color with a small street price is cheaper than P company. A part of big thing had the high thing. Finishing of processing is felt somewhat ruder th
It is the comparison with the aluminum collar by P company which was being used until now.
The color with a small street price is cheaper than P company.
A part of big thing had the high thing.
Finishing of processing is felt somewhat ruder than P company products.
The direction which the result condition of processing worries recommends P company.
(If a day passes since alumite treatment is not carried out, it will become cloudy, but it is --) It is used by inconspicuous Tokoro.
Finishing is not worrisome.
And if it is a cheap size, I recommend Mr. Kitaco.
View detail
Spacer collar discovery TSU perfect to W650!! If the following 3 items are treated, That there is nothing incompletely, it becomes smart extremely -- TSU!! [Kitaco] aluminum spacer collar: #0900-093-00027: M6 size: Outside-diameter phi18mm : 8
Spacer collar discovery TSU perfect to W650!! If the following 3 items are treated,
That there is nothing incompletely,
it becomes smart extremely -- TSU!! [Kitaco]
aluminum spacer collar: #0900-093-00027: M6 size: Outside-diameter phi18mm : 8 mm in height: 1pc.+ [antlion] Cap screw flange (chromeplating): #09001-CR:
M6 (it is 18 mm in outside diameter) : Gatling: 1pc.+ [tachyon] of the 2pcs./set(s) Titanium cap bolt: #TC06050: M6x50: It is the contents of the picture which combined the 1 pc. above and 3 items.
This part becomes near the side stands on the left-hand side of [ car-body ] W650.
The portion which connects the side stands switch which becomes a safety device interlocked with the operation of side stands, and a frame is right.
With the original manufacturer's product, the size of M6x40 is treating this bolt.
And a hollow is on a frame as if the head of this pure bolt was buried in the frame.
If the hollow of the frame of this portion is measured, it will become a hollow whose outside-diameter phi18 mm and, and depth is about 10 mm.
Even if one cap screw flange of an antlion remains ...?
Say and say.
There is no such thing!!
It will be OK if the cap bolt of M6x20 is prepared!! The swing arm left-hand side of W650 has a chain slide guard made from a rubber.
M6x18 is being used for the pure bolt which connects this through color.
It will be a cinch if this bolt is replaced to the cap bolt of M6x20 through the cap screw flange and pure color of an antlion!! If a side-stands stand is hung and parked at W650, W650 will incline to the left.
I want brightness also on the leaning left-hand side!!
It is a reason for having performed this dregs MAIZU.
* Two bolts used for this customization.
M6x50 It reaches. Although we used the bolt of M6x20 as the titanium-alloy bolt made from a tachyon, I think whether the cap bolt made from a stainless may be sufficient.
However, I consider only the bolt made from aluminum as it is better not to use it.
Because an aluminum bolt can be used only for the place in which stress is not applied extremely!!
View detail
When attaching the sub frame made from KITACO to the zoomer (ruckus) of carburetor specification, this color is required in order to bury it, since a crevice is made. Although it thinks that color purchases because it is required, it sticks from the b
When attaching the sub frame made from KITACO to the zoomer (ruckus) of carburetor specification, this color is required in order to bury it, since a crevice is made.
Although it thinks that color purchases because it is required, it sticks from the beginning, and should be a little cheap just, I think that it is a good place that can buy it afterwards when it loses.
View detail