Reviews
Neat appearance. Prevents rust caused by raindrops.
Removed the cowl mirror from CB400SB and replaced it with a handle mirror. At that time, I replaced it with TANA-X Shark5. I couldn't bear the uncomfortable feeling like a snail when I rode SUPER BOLDOR for the first time, so I spent a large amount of money to replace it with my favorite mirror.
However, because of the cowl, I could not easily install it, so I even bought a Tanax Adapter or something like that, and finally got it to fit nicely. Finally, I was able to fit this cap.
The product is good, of course, but I think it is a little expensive if it is stolen or falls off due to vibration. If it were a little cheaper, I would like to cover various places properly.
Please give us a discount. Also, please give us the smallest size.
View detail
Thanax M10 mirror bolt cap
Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install.
If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top.
Webike delivery and packaging are in excellent condition. Thank you. -------------------------------------------------- -------- Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install. If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top. Webike delivery and packaging are in excellent condition. Thank you. Powered by Google Translator
View detail
TANAX M10 Mirror Bolt Caps
125 years old, 125 years old, 125 years old.
I want to know more about this.
I bought the genuine Monkey 125 side mirror because I couldn't see the rear clearly.
After installing the offset holder, the mirror viewing angle will be good, allowing you to see what's behind you and drive safely. -------------------------------------------------- -------- The side mirror of the genuine Monkey 125 was purchased because it could not show the rear. After installing the offset holder, the mirror viewing angle is good, so you can show the rear so you can drive safely Powered by Google Translator
View detail
arrangement
Quality and Texture Information Plastic Products It's neat to look at the feeling of use Products to purchase together TANAX: Off-set Holder 30 [SA-23] It's easy to install Cost performance and comparison to other products TANAX M10 Mirror Bolt WeBike packaging is always great, arriving in a week for delivery and packaging Concerns about purchase TANAX: If you purchase Off-set Holder, you can neatly organize the purchase together View detail
OEM Parts Flavor
[How is it used?
In conjunction with the conversion of the Mirror on the 390DUKE to an Other Brand Product, we decided to use the Tanax Off-set Holder 45 (product number:SA-25) to improve the Mirror's visibility, I installed this product to prevent water from collecting in the hexagonal holes of the bolt and rusting.
Was the one you received as per Image?
Material:It is a Plastic Cap. If you handle it roughly, it looks like it will be damaged soon.
Was the installation difficult?
There are no claws attached to prevent it from falling off, but it is a little tight-fitting so that it will not come off immediately. I tried to remove it once as a test, but it was quite difficult, so I don't think it will come off without permission while driving.
How was your experience with it?
I am satisfied with the finish as if it were OEM Parts.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang for installation:If the cap is pushed in at an angle, it will break. if the inside of the hexagonal hole is already rusted, it is better to remove the rust first before installation.
Instruction Manual:There is no Instruction Manual, but as you can see, it is a simple structure, so you just need to push it gently into the hexagonal hole of Bolt.
View detail
I tried to put it on, but...
[How is it used?
Use Mirror of another Manufacturer.
Because of the disappointing appearance of the cap bolt that came with it (Rust, scratches),
Purchased along with Cap bolt from Tanax Napoleon On.
Was the one you received as per Image?
Yes
How was your experience with it?
Tanax Bolt itself, with good plating quality,
Just by replacing Bolt without any caps.
I was satisfied with it, but I put it on since I purchased it at the time.
However, it is troublesome to remove the Mirror when adjusting the Mirror position,
I think the Demerit called "Large" might be more Large. Personally.
View detail
TANAX M10 Mirror Bolt Cap
About quality and texture - Top quality. Smooth surface finish on these black plastic caps form TANAX. About the feeling of use - They fit perfectly into the countersunk allen head bolts I had fitted to the mirror mounts when I swapped from the lollipop mirrors to barend mirrors and the caps have now finished off the mirror change beautifully. Products to buy together - If you are looking to blank off the original mirror mounts you will also be wanting to have a pair of barend mirrors in your Webike shopping cart also. Difficulty of installation - A very simple installation process of just pressing them in firmly but I also like to add a little silastic sealant so they don't move over time with the engine vibration. Cost performance and comparison with other products - Extemely cheap solution to the unfinished look of having open bolt holes in your field of vision while riding. No cheaper option that I could see but plently of CNC machined fasteners at a higher cost here on Webike if you aren't happy using plastic caps. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These M10 mirror bolt cap are sized to fit into the hole on top of the bolt and not the bolt hole itself. View detail
It'll make you look good!
I used it to cover the Bolt hole in my Tanax OffsetHolder! Looks like a Large thing! I didn't have the right tool on hand, so I had to remove the Mirror from the OffsetHolder.
Cap should be fitted only after the Mirror is properly angled and each part is firmly fixed! I thought the price could be a little lower. I thought it could be a little less expensive!
View detail
Don't get the OEM feeling with Bolt's Cap!
I added the Side Mirror Base and bought a special Bolt cap.
Quantity:It was 1 Set of 2pcs. (Side Mirror Base was sold one piece at a time, so I made a mistake and bought 2Quantity.:(I've bought a Set... sweat)
I am satisfied for this product.
Maybe it could be included with the Side Mirror Base! Am I the only one who thinks that? (laughs)
View detail
It is the same manufacturer, so the delivery is very good.
Bolt with Cap will hold water.
You don't want to see it rusting as it is often in your view.
It fits the Bolt well and the outside diameter is just right.
I think it's a little expensive for resin Parts.
View detail
หากต้องการความสวยงาม สิ่งนี้ จะทำให้หัวน็อตกระจก ดูโดดเด่นยิ่งขึ้น View detail
4.0
How it came about:to plug the screw holes in the Tanax Mirror that I purchased. It is rain and dirt prevention.
Installation and accuracy:Just insert it. Anyone can do it.
Quality and texture:Plastic is still cheap. However, I don't mind it because of its small surface area.
Shape:round.
Visibility:of course, but it doesn't increase visibility. It doesn't matter.
Cost performance:Waterproof and dustproof for 300.
Overall:I'm glad I bought it.
View detail
I want it to come with the OffsetHolder
I bought this for the purpose of plugging the bolt holes in the company's OffsetHolder
This is a product I wish came with the Holder
The texture is brittle and plastic
View detail
It is totally different if there is something
Bolt does not rust first. When I removed Cap from the Mirror of the Motorcycle I used the other 8 days ago, the Bolt was almost rusty so it was capable of stopping rust.
Of course, quite capable as Dress-up.
If you brush Goshigoshi with 100 Cream Cleaner, Mirror revives shine together.
When removing, use Minus of GlassesScrew or minus of Precision Driver can remove comparatively little scratches. It might be a bit harsh to remove it perfectly intact.
View detail
It will look better!
I used it for Mirror of DAYTONA.
It is possible to use it if the hexagonal part that hits the tool of Mounting Bolt is 8 mm.
It is recommended that rain water accumulates to prevent rusting and appearance also becomes SMART.
View detail
It is for the purpose of concealing the hole of Cap bolt
I purchased to hide Cap bolt's hole
It's relatively easy to fit, but if you remove it this time it's a bit hard
Slotted screwdriveretc. You can easily come off if you let it happen in
In that case please be careful not to scratch the thing to remove
Also if you wake up strongly it will fly away so be careful
View detail
Ordinary goods
Mirror 's Screw hole does not allow water to accumulate.
It is a terrible Cap.
I wish Colored was better ^ _ ^;
But it is better than rusting.
View detail
Bought with BAREN Mira - Bolt's hole purchased together Hidden
Ideal for hiding Mira-Bolt holes.
I think it's pretty good so I do not think I can get it unexpectedly.
It's a bit of a thing, I think it looks pretty refreshing as it appears.
It is good for prevention of dirt of Cap bolt hole by dust and Garbage ingress,
Since Mira is Plating, it is obviously purchasing a thing of Plating.
I am really satisfied..
View detail
Very neat look with this nut cap. Brought a APE mirror to use togather with this nut cover. Overall look very neat. The nut cover provide anti rust protection for nut.
Very neat look with this nut cap. Brought a APE mirror to use togather with this nut cover. Overall look very neat. The nut cover provide anti rust protection for nut. View detail
Tanax Napoleon On Mirror Cap
When I installed Tanax Napore OnBARENTT, I did not mind at first, but I started worrying about the part of Bolt being exposed, it was also a place to see it, it was a place that I could see, Rust prevention and appearance improvement I bought it with. I am self-satisfied, but I think that it would be better to purchase them together when purchasing Mirror.
View detail