Reviews
It'll be cool!
I installed it for its appearance!
I am satisfied with the style and the large size!
But the removal of the OEMBlinker is Large strange!
I warmed up the rubber part with a dryer and removed it by prying with a slotted screwdriver.
Note that Blinker is also thin and easily broken!
Reflector is sold separately!
View detail
When in doubt, this is the one. I'm glad I did.
[How is it used?
Duration:from about April 29, 2017 to as of September 10, 2023. Only the Blinker Bracket was removed at some Timing
Distance:approx. 68,197 km
Combination items:ACTIVE Reflector Kit Slim, POSH Faith Aluminum License Plate L Size, CF POSH SUS Number Plate Fixing Torx Taper Bolt & Nut Set
Was the one you received as per Image?
The product is exactly as pictured in the Image.
Was the installation difficult?
I think it was troublesome because I didn't know how to remove the cowl at all just after I switched to a new car. Furthermore, it is necessary to remove the seat and tail cowl, not the front part of the vehicle including the SIDE, which is usually removed for maintenance, so even now that I am used to it, I think it is still troublesome. Except for the removal of the cowl, the installation itself is not difficult.
How was your experience with it?
The installation of the Tandem seat naturally causes mud splashes to hit the Tandem seat, which is a cause for apology.
Since the most protruding part is the Tire or Tail cowl, the distance that can be retreated back is slightly increased for the same Space.
Since the Number is placed far forward, and the upper part of the Number is unguarded except for the bracket, the possibility of bending of the lower part of the Number due to a side bag or accidental human impact is increased.
Since all parts are RoseRose, OEM blinkers can be implanted in the beginning, and later, when blinkers are replaced, only the relevant parts can be targeted and removed, creating a clean look at all times.
Note that the Reflector, which must be used in conjunction with the Reflector, is not included in the package.
Probably sturdy, as it has not broken even with the aluminum plate, different bracket and blinker that are not included in the package.
The LED License Plate Lamp is also still reliable, as all four are still building materials.
The vehicle has been inspected as is, so it probably passed. (Vehicle purchased before the revision of the standards)
[Included Parts:were they on?
As shown in the product image.
[Was there anything that disappointed you?
I guess there isn't because there is nothing to be concerned about.
Conformity of License Plate with revised standards
Before revision Being able to read." It is not clear whether the safety standard is met for vehicles with clearly defined angles after the revision, since it has been in use since the time of the
This is a standard item that can be found at most Large Mortgage Motorcycle stores, and many riders have probably used it. It is a recommended product that can stand up to the mud and the mileage.
Since the revised criteria are unknown, the risk of BonusPoints being added when caught in some cases should be considered.
View detail
Active Fender Eliminator Kit
Fender Eliminator Kit made by Active.
The Rear area is now cleaner and Parenthesis better.
View detail
Slightly Refreshing
CBR600RR (PC40) Purchased and installed for
Installation with some of the OEM Parts is
It was good that it was not that difficult.
Originally, OEMFender was not Large enough.
There is no significant difference, but there is a slight difference in the Rear.
I felt like I was Refreshing.
View detail
Fits: KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400
Strength is solid.
Cheap Fender Eliminator Kit may break due to vibration, but this product is strong and will not break due to vibration.
The price is a bit on the high side, but I am satisfied with the good angle of the License Plate and the luggage Hook.
View detail
GSX-R750 Fender Eliminator
It is easy to work with because you just remove and attach.
LEDs are also Coupler, so you can go Couplet-on without wiring processing.
View detail
I recommend this product for its good cost performance and design, even though there are many similar products!
At first glance, similar products that appear to be exactly the same? However, if you compare the photos carefully, you will notice that the design is slightly different. I chose this product because I thought the distance between the Tail lamp, License Plate Light, and License Plate was the most compact and parenthesis. I was worried that the price would be a little lower than the other products, but I was wrong. I would recommend this product to everyone! View detail
Neat rear fender
To remove the existing genuine fender and look sleek, we recommend a fenderless kit. The product finish is also excellent. View detail
It is solid and has a good texture.
At first, I had installed CHINA's cheap Fender Eliminator Kit, but the hole to install the blinker was too large and the hole was noticeable even after installing the blinker (you could see the other side), and the LED License Plate Light was too large and looked cheap. I replaced it with this one because I didn't like the cheap-looking feeling of the Large License Plate and the Clearance on the side of the car body.
Installation is not particularly difficult. First, pull out the Coupler, which integrates the Blinker and License Plate Light wiring, then remove the OEM Rear Fender, and you are halfway through the installation process.
All that is left to do is to install the equipment in accordance with the Instruction Manual, which is not difficult at all, so I would like to encourage custom beginners to give it a try.
However, the instruction manual included in the package is white-black and difficult to understand, so it is better to use the PDF version of the instruction manual, which can be downloaded in color by accessing the Active homepage from your smartphone.
I wish they would have included a color printed Instruction Manual from the beginning... but I am thankful that a color version is available. I think this is a good measure to lower the Hurdle of installation.
It is an aluminum Fender Eliminator and costs close to 20,000 yen, but the quality is good because of its high price.
I especially like the elegant way the License Plate Light shines, where the light source is not fully visible.
However, I personally prefer the License Plate to be a little closer to the body of the vehicle, and the License Plate should be laid down to the limit, although it is legally regulated. Also, it would have been better if there was some kind of improvement to plug the holes where the Blinker and License Plate Light wirings are pulled into the body of the car. But it is a Large Merit that can pass the inspection as it is.
*Reflector is not included and must be purchased separately.
The S1000RR after 2015 seems to have a slightly different image than the Wiring color in the instruction manual.
Also, when I disconnected and connected the OEM License Plate Light Wiring to power the LED License Plate Lamp that was included in the CHINA Fender Eliminator Kit, it came on at first but soon stopped working.
Then I connected the License Plate Light of this product to the OEM License Plate LightWiring and it did not light up. I had no choice but to branch off from the ETC power supply and Wiring.
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
Not compatible with Pannier case.
I looked at the price and bought it because it was cheaper than the Puch and it would pass inspection (some people say it won't pass because the Number standards have changed …). The installation process was easy to understand because the Instruction Manual was enclosed. (I might introduce it on myGarage too.) When I tried to install the H2sx OEM blinker, it was not possible to install the Pannier case, so I bought the Active blinker and installed it including the press-up which took a little time. If you want to use it with Pannier case, I think you have to spend a little bit of money or DIY. However, I am glad I installed it because the Rear Fender area is very refreshing! View detail
customize your 750 zephyr
Hello
I love my 750 heritage and I wanted to remove this ugly plastic mudguard I wanted to buy it on a French site but I tried direct from Japan and a week later I had it ------------- --------------------------------------------- Hello I love my 750 Heritage and I wanted to delete this ugly plastic mudguard I wanted to buy the French site but I tried direct japan and a week later I had it Powered by Google Translator
View detail
ACTIVE Active Fender Eliminator Kit
To give the Rear area a Refreshing look, we replaced it with a Fender Eliminator Kit.
Mud splatter may be worse, but we prioritized appearance.
Among the Fender Eliminator Kits, I chose ACTIVE for its appearance and quality, and so far I am very happy with it.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Active fender eliminator kit
Fast delivery, item was packed safely and arrive in good condition, Really recommend you guys to order from here, Thank you guys! View detail
ได้รับสินค้าตามรูปแบบครบตามจำนวน แพ๊คมาอย่างดี สมบูรณ์ไม่มีรอยขีดข่วน ถึงตามเวลาที่กำหนด View detail
It was easy to install.
There is some electric Wiring recombination, but even I, an amateur, could do it.
I'm happy with it
View detail
I recommend the Fender Eliminator!
I bought it from WehBig through their physical store and had it installed in time for delivery!
I always install Fender Eliminator's made by Active!
I'm pretty happy with the texture and finish of Bracket!
View detail
Refreshing the buttocks
There are a lot of manufacturers, but I prefer the one that is a little further back than the tail lamp, so I decided to go with Active's. The easy to understand replacement procedure on the net was also a deciding factor, and I was able to replace it in about 2 hours, thanks! View detail
Fender Eliminator is the basis of Custom
I use it on my KATANA which I co-own with my brother. We absolutely prefer the Fender Eliminator which is Refreshing around the Rear and is the basis of Custom. In the beginning, my brother was opposed to Fender Eliminator, but (We take turns storing the car in our garage and in my brother's garage for a month at a time) We exchanged it on our own during our deposit period. However, I was relieved because my brother who saw the actual thing liked it unexpectedly. View detail
Japanese Vehicle Inspection Correspondence in Stylish
It was attached to a cbr1000rr that I got from a friend at a discount price, and I'm glad that I recommended this Fender Eliminator to my friend, because I installed it before. View detail
Fender Eliminator is the basis of Custom
It is Fender Eliminator Kit that I exchanged immediately because I could not allow it by all means in the busa of the 2009 CanadaMODEL which I acquired from my brother. This one also has License Plate Light, and I chose it because it is Bolt On without the need for wiring processing. After all, the appearance is also important for Motorcycle! View detail