Reviews
Easy to install
I had installed DAYTONA's Bar End, but the Bar End was too large and too conspicuous, so I replaced it with these parts including vibration reduction. The outside of the bar end is small and looks good. I feel that the vibration is slightly reduced. My vehicle is Material:I was not sure whether it was better to use a Stainless Steel Handlebar or an Aluminum Handlebar, but I chose the one for the Steel Handlebar for now. View detail
What's the effect?
I installed it to reduce vibration and also to protect the Bar End.
What are the effects I can feel, such as reduced vibration? The answer is yes.
Depending on the motorcycle you install, you may be able to see the effect.
View detail
Just the right amount of weight, less vibration!
I bought this to reduce vibration in my single cylinder engine.
By this, you can enjoy riding without so much numbness even in the long distance of touring etc.
It's very easy to install and it's one of the easiest parts for custom beginners to start with.
Because the end part becomes Small than Grip, it might not be suitable for the person who loves heavy weight etc.
View detail
Comparatively cheap and good performance, but small processing is necessary for CT125
The JA55 CT125CT110 HUNTER CUB is equipped with a Honda OEM Bar End with anti-vibration weights in deFault ……………
The function itself doesn't have any complaint so much, but it is what is called Honda's self-righteousness mechanism, and even if you turn the phBolt, it won't come out unless you press down the claws on the top and bottom;
So I ordered this Bar End with Universal Anti-Vibration Weight
After I ordered it, I noticed that although it's for Steel handle, it's for Φ19-18, and the CT110 HUNTER CUBOEMHandlebar's Φ17 won't fit the end rubber for the lock at the back.
Well, I just need to make the rubber diameter thin by 1-2mm, so I used a disk grinder and a polishing disc to remove the outer circumference of the rubber.
If the end rubber goes in and has a neat tension, it's OK.
If you change the O-ring on the Bar End side to the Small Φ18, there is no problem.
Bar End also became a little small, and, to put it nicely, it was Refreshing
To make matters worse, the Cover range has been reduced.
WeightThe weight is also a little lighter, so the resonant speed at which vibration is likely to occur may change.
Personally, I don't like the OEMBar EndgiMick very much, so I was able to replace it with the Refreshing Large;
View detail
It's perfect for the HURRICANEHandlebar
Mounted on Made by HURRICANESwallow
You need to replace the supplied rubber with a thin one, but it will ExactlyFit
As for the vibration control, it is effective, but it does not eliminate the vibration at all
View detail
Comparable to OEM
I bought the Stainless Steel type when I changed the Bundle on my ST250 It's 10g heavier than the OEM, but slightly lighter than the OEM because the center of gravity is closer to the Clamp I think this is the effect In fact, there is no unpleasant vibrations up to 80km/h after installation, and it is a good thing that there is no unpleasant vibrations over 80km/h with the trunk of the knee grip There is the same cycle of vibration, in essence, the timings that vibrate are the same as the OEM The Handlebar is shorter than the OEM, so those who haven't changed the Handlebar will have to replace it and you may feel a slight increase in vibration
Other imprecise comments about the size of the O-ring:Smaller is more appropriate There was a It's a little large I installed it as it is It was not easy to fit in, and I managed to push it in with a Slotted screwdriver and a hammer However, the rigidity of the LeftGrip is clearly improved after installation, so the original performance of the LeftGrip is only press-fit It may demonstrate a
As for the ST, the OEM is a pretty heavy Bar End, so as far as vibration reduction through replacement goes It might be better not to expect too much; the Compact of the Bar End will be used to increase the vibration Enough to be an option if you are a Custom lover who wants to make Large achieve not so much I think it can be However, it is not cheap, so my honest opinion is that the cosmetic value is subtle in terms of performance
View detail
It is vibration reduction.
Handlebar weight uses EFFEX from before.
It is a trust Brand.
However, the outer diameter of the O-ring was Large rigidly, and it replaced it with the attached 1 mm Small one and installed it.
Since it is for Steel handle, I want you to attach a Small O-ring from the beginning and ship it.
View detail
Is it working ??
I feel that I can not understand much about the effect of what I attached.
I think that it is better than not attaching anything.
View detail
I think it's good
I removed the hand guard of Racer, but I disliked the handlebar vibration and bought this part.
We can not compare because we have not tried in the absence state, but since we have not deteriorated against the condition with Hand guard, we think that it is selfishly effective.
Handlebar I think those who are concerned about vibration are worth a try.
I chose the diameter for Aluminum, but in W Racer Normal bar there was somewhat Wobble.
I adjusted and mounted it with Vinyl Tape.
View detail
I used it for SR.
I changed Throttle cone to Open Type, so I attached this product which is the Inner Weight integrated type Bar End to the vibration countermeasure. 100% vibration does not disappear, but I feel that the numbness of the hand has been alleviated somewhat. View detail
Handlebar weight
Buell, because of the V type HarleyEngine, there are horrible vibrations, so even if the car stops, the whole car trembles with Idling. At the time of running, the vibration was constantly transmitted to the Handlebar, the hand was numb and it was very painful for a long time traveling. I bought the Weight bar this time, but the result was very good and became normal from pain.
It is possible to travel for a long time with this. Those who are troubled by vibration, I think that there is no loss by purchasing.
View detail
Handlebar weight
I bought it for vibration reduction.
I like it because it is not visible to the appearance,
Impression after installing,
I feel that the vibration has decreased with a good feeling,
Fatigue will be alleviated even over a long period of Riding.
View detail
Although it was a melon that the Grip end of a Chrome is attached from the beginning as for CB750Specel, since the Grip end of the NORMAL could not be used, the Easy fitting bar was purchased.Since he did not want to break down NORMAL Image, the Polis
Although it was a melon that the Grip end of a Chrome is attached from the beginning as for CB750Specel, since the Grip end of the NORMAL could not be used, the Easy fitting bar was purchased.Since he did not want to break down
NORMAL Image, the Polish more nearly big-ticket than other colors was purchased, but since the Bar end was quite smaller than the NORMAL and the Parenthesis was dramatically bad, the Bar-end portion used the thing of the NORMAL.
Although it was the melon which the Switch hole is opening, in order that the Rubber at the tip of a Balancer ? Shaft might be caught in the hole, could insert an Easy fitting bar to the last and it might not have it, it had to cut the Rubber in the half again.It is better for
appearance to have been that which is said, and to purchase cheap other colors by other Motorcycle, since there is no meaning of a Stainless polish in CB750Specal although it may be good.
View detail
Since it had attached to the Motorcycle owned from before, 2 set Motorcycle also chose this product. It is useful for oscillating mitigation instead of the Bar end of only appearance. It is not merely oscillating mitigation and vibrat
Since it had attached to the Motorcycle owned from before,
2 set Motorcycle also chose this product.
It is useful for
oscillating mitigation instead of the Bar end of only
appearance.
It is not merely oscillating mitigation and
vibration is not necessarily lost.
It is the highest if cheap to a slight degree.
View detail
It attached to the Steel handle made from a HURRICANE. Compared with the Bar end cap of a Type without the Balancer shaft, vibration decreased substantially.
It attached to the Steel handle made from a HURRICANE.
Compared with the Bar end cap of a Type without the
Balancer shaft, vibration decreased substantially.
View detail
At first, although the effect was seldom expected, it attaches and there are a surprise and a remarkable effect. Since appearance also chose the stainless Weight, it is pleasing by natural touch.
At first, although the effect was seldom expected, it attaches and there are a surprise and a
remarkable effect.
Since
appearance also chose the stainless Weight, it is pleasing by natural touch.
View detail
It attached to the CB1300SF 07 model of HONDA. the Easy fitting bar (an Aluminum -- it is not -- the direction of iron) which carried out simultaneous purchase -- although purchase of was done at business -- the accuracy of a situation plug Handl
It attached to the CB1300SF 07 model of HONDA.
the Easy fitting bar (an Aluminum -- it is not -- the direction of iron) which carried out
simultaneous purchase -- although
purchase of was done at business -- the accuracy of a situation plug Handlebar --
-- since it was bad (the BALI remained in inside), attachment was dramatically difficult.
Since it is a Handlebar and the
Set, I would like to carry out へん about there perfectly, although the
bar Weight itself was improved by mono-はとて.
Although he wanted to use *5 つ in fact, since attaching took a serious labor and time,
*3 つ was used.
View detail
I thought whether to become in play [ of handle + weight ] rather than having called it in play [ of handlebar weight ], but the effect until it pays honest money was not acquired. a handle position, vibration absorption, and appearance -- which serve
I thought whether to become in play [ of handle + weight ] rather than having called it in play [ of handlebar weight ], but the effect until it pays honest money was not acquired.
a handle position, vibration absorption, and appearance -- which serves as not quite satisfactory evaluation.
About vibration, the direction after handle exchange feels it large.
Kana which could be normal!!
View detail
It was used for the kawasaki Z1. Since it was an air cooled engine rigid mount, vibration was uncanny, but I think whether the half has been reduced with this product. Although change may not feel for some persons, I think the value whereabouts tr
It was used for the kawasaki Z1.
Since it was an air cooled engine rigid mount, vibration was uncanny, but I think whether the half has been reduced with this product.
Although change may not feel for some persons, I think the value whereabouts tried since the amount of money is cheap.
View detail
Although a long distance had not run yet, the effect did not understand the comment with which it equipped only by appearance. Although attachment was easy, since an O ring did not enter, lube was attached just for a moment and put in. I think tha
Although a long distance had not run yet, the effect did not understand the comment with which it equipped only by appearance.
Although attachment was easy, since an O ring did not enter, lube was attached just for a moment and put in.
I think that what is necessary is just to think the dress-up purpose up since a price is also handy.
View detail