Reviews
JA55 Left hand Brake for mounting
JA55 Left hand Brake purchased for installation
At first, I assembled it with 45°, but I felt the Hose was compressed, so I replaced it with 20°,
It was installed with natural handling.
View detail
JA55 Left hand Brake for mounting
JA55 Left hand Brake purchased for installation
It was settled at 45° from Master Cylinder just fine.
View detail
For grom jc92
I chose Stainless Steel because it was on sale at a lower price and I was told by an acquaintance that Aluminum can break.
This time we have Grom JC92 for Rear with 20 degrees on MASTER side and Straight on Caliper. Caliper is the new Crab.
Since we did the same pull as the OEM, it was easy to follow the Swing Arm.
View detail
Essentials you need to have
Purchased for front brake radipon conversion.
Material by the fact that it is personally in direct contact with the outside air and subject to no small amount of pressure.:Stainless Steel was selected. I also purchased a black banjo adapter from Active, who also sells black banjo adapters, so I was sure it would be a good choice.
View detail
Compact
GSX1300R GSX1300R HAYABUSA Installed on a 1999 model
Material:Stainless Steel banjo adapter.
Banjo available at general Motorcycle supply stores is Goodridge (This product) or Swage line.
They differ in the thickness of the banjo section, with Goodridge's being thinner. (narrow) It is
Banjo bolt must be chosen appropriately or the oil supply line will be shifted.
In combination with Goodridge's Brake hose, which is compact around the fitting, the banjo area can be compactly accommodated by combining this product.
The Swage line's hose/fitting is also large, giving it a custom look, but this one can be put together as neatly as an OEM.
I guess it is a matter of preference as to which is better.
Also, although the manufacturer does not recommend it, the fitting part is a standard size, so it can be used in combination with other manufacturers' brake hoses and fittings as long as they match the standard.
The drawback is that Material:Although it is Stainless Steel, there are some rust-like stains or dullness after a long period of use. Dullness? The stain is like rust.
It is not Red Rust, so you have to look closely to see it, but if you buy it with the intention of using it semi-permanently, you may be a little disappointed.
View detail
Layout as you want it
Additional purchase to make Layout the way you want it. View detail
Stainless Banjo Adapter20 degrees
Purchased for rear caliper side for cb400sf
The texture is good, and above all, it's Shiningly cool.
View detail
Stainless Banjo AdapterSIDE 20 degrees
Purchased for cb400sfRear master side
It went on without any problem.
View detail
Angle adjustment
I bought it because I needed to adjust the angle. It's easy to use, but it's Stainless, so it's a little expensive. View detail
Stainless Steel
Satisfied with the Layout to the Line as per the Image. View detail
Stainless Banjo Adapter
Stainless Banjo Adapter
Material because I don't want it to rust.:Buy Stainless Steel
Precision is very good and all Adapters have been changed to Stainless Steel
View detail
sturdy
I replaced the banjo bolt and banjo adapter when I replaced the brake hose and master cylinder. I chose Stainless black for all of them.
The texture is very good and solid. The only thing I don't like about it is the high price.
I ordered aluminum before, but the texture is cheap and lightweight. The good thing about Aluminum is that you can choose the color and it looks good, and it is cheaper than Stainless Steel. (It would be nice if Stainless Steel had a variety of colors (Black and Silver only).
Maybe it can't be done materially?
View detail
From Separator
Used when turning back from Separator
20° is optimal for this installation
View detail
Easy
Tokico's 6potCaliper, 45° was the best for back turning!
It looks like it can be replaced with a Brembo caliper without any modification.
View detail
Stainless Steel is more secure.
The price is rather high, but we chose Stainless Steel because we wanted to use the strongest parts possible for the parts used around the brake.
The quality is good, and the solid construction gives a sense of security.
View detail
good ridge : GOODRIDGE stainless adapter * outlet goods, Product number: B593-03CBK, wide use, angle:20 degree color:Black raw material:stainless good ridge:GOODRIDGE washer (product made from active), and product number:20998004, wide use, and size:1
good ridge : GOODRIDGE stainless adapter * outlet goods,
Product number: B593-03CBK, wide use, angle:20 degree color:Black raw material:stainless good ridge:GOODRIDGE washer (product made from active), and product number:20998004, wide use, and size:1 mm thickness / inside diameter:10mm Raw material: Copper The number of entering: 4
View detail
It is a stainless from aluminum in steel!
It is a stainless from aluminum in steel! View detail
-- good ridge: -- GOODRIDGE stainless adapter product number: -- angle:45 degree color:Black raw material:stainless, and active:ACTIVE air-bleeding pump TYPE-1, product number:14600001 and wide use [ B594-03CBK, wide use, and ]
-- good ridge: -- GOODRIDGE stainless adapter product number: -- angle:45 degree color:Black raw material:stainless, and active:ACTIVE air-bleeding pump TYPE-1, product number:14600001 and wide use [ B594-03CBK, wide use, and ] View detail
Ideal handling
There are a variety of shapes available for ideal handling when DIY BrakeWiring.
Material:Stainless Steel and supposed to be semi-permanent.
If only it were a little cheaper...
View detail
Looks sturdy and beautiful.
I purchased the Straight and 20 degree because I need them for my StainlessCrimpType Universal hose from Buildaline.
Crimp, Banjo adapter and Bolt are all made of Stainless Steel, which is more durable than Aluminum.
Although heavier and slightly more expensive than aluminum, brake hoses are important parts that can be life-threatening.
I am also pleased with the shiny texture of the Stainless ground.
View detail