Reviews
JA55 Left hand Brake for mounting
JA55 Left hand Brake purchased for installation
I was able to install it with no leaks.
View detail
Purchased for Brembo.
Purchased because the length of the banjo bolt that came with the 19RCS did not fit.
I wanted Stainless anyway, but I can't spend over $1000 for Bolt lol.
It is for Brembo and can be used without any problem.
View detail
When installing bremboCaliper
Installed when bremboCaliper was installed.
I had the color I wanted and the installation was completed without difficulty.
We will see about durability in the future.
View detail
Stainless Steel is safe
I chose stainless steel to match the black brembo. The color was not pure black, but it was a nice combination of colors. View detail
Banjo bolt with Wiring hole
I purchased this bolt because I am going to change the pitch of the banjo bolt to change to a Brembo caliper.
The surface treatment of Anodized was also well done, and even when Torque was applied with Wrench, there was no color flaking of Anodized and it was finished beautifully.
The hexagonal head has a hole for wiring to prevent loosening and was wired with 0.8mm Stainless Steel Wire.
Circuit runners will also be able to use it with confidence.
View detail
It's done right!
Installed in conjunction with the conversion of the brake master.
I chose Red to match the Red color of the car body.
View detail
For Brembo master
When replacing the clutch hose on MainMotorcycle's XJR1300C,
Since the clutch master cylinder has been changed to brembo's 19RCS,
The 1.25 Pitch banjo bolt that came with Goodridge was not available.
1.00Pitch.
View detail
For Caliper for cbr1000rrr
Used for Caliper for cbr1000rrr
Buy NISSINCaliper for cbr1000rrr because it is the same as PitchGunGunbrembo
The quality is very good.
View detail
person who does the work behind the scenes
Small parts, but they are important safety parts with high precision and can be purchased with peace of mind. It is at times like this that I am glad to live in Japan.
Personally, I'm personally hoping that the standards will be aligned so that the Brake hose and Banjo bolt can be directly connected.
View detail
Purchased as a spare
I bought this as a spare when replacing the Clutch master.
I didn't have to use it as a result, but it's a good idea to have it ready along with Washer.
View detail
Stainless banjo
Purchased for cb400sf Rear brake
It's well made and looks Parenthesis good.
View detail
Stainless Steel
Banjo and Quantity:Purchased the set. I am satisfied with the quality. View detail
Stainless banjo bolt
Material:Stainless SteelBanjo bolt
Do not rust Material:Purchased Stainless Steel
I'm replacing it for the purpose of dress-up, so it doesn't improve performance, but it does motivate me.
View detail
Required for brembo products
What made you decide to buy?
I have been thinking about strengthening the brake since I took delivery of my ZX-6R!
[How was the installation?
The banjo bolt that comes with the Brembo master cylinder and Caliper cannot be used with the buildaline because the thickness of the banjo adapter is different. The banjo bolt supplied with the brembo product can be used with the OEMBrake Adapter.
When replacing the Brake Fluid, be careful not to touch the Cowletc. with your hands because the Brake Fluid will damage the painted surface. In case of emergency, we recommend that you store water in the bucket and wash the Fluid after touching it! We recommend that you wash the Fluid after touching it.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
View detail
Stainless Steel
Material:I had been using an AluminumBanjo Brake hose, but I heard that it could break with the slightest impact, so I purchased this product in conjunction with the change to SteelBanjo.
Rear brakeCP2696, but Thickness:The Bolt bottomed out with a 1mm Crash washer, so we were able to install it using a 2mm thick one on the Caliper side only.
You can drive with peace of mind.
View detail
OK, I think it's good.
Choose Stainless Steel with BrakeOIL, which is resistant to corrosion!
It is also recommended to use Stainless Steel for the Hose side.
Brembo calipers for Yamaha cars do not have a fine screw pitch.
Be careful when ordering!
View detail
For Brembo caliper
Installed on a Brembo caliper.
It has been installed without any problems. 。
The price is reasonable for one thing, but I'm not sure if it's too cheap, so I think it's just right.
View detail
Required for DAYTONA Brake hose
Vehicle:Ninja 250 (JBK-EX250L)
To install DAYTONA High Spec Line Brake Hose Type A (60574), this product (Stainless Steel GOODRIDGE ).
(The above Brake hose is GOODRIDGE. (Because we recommend the use of Banjo bolt).
I am very satisfied with the texture and processing accuracy as shown in the product images.
View detail
Banjo
I also purchased this product to replace the hose. It is very helpful to have the same manufacturer. I am satisfied with this product because I can buy it a little cheaper than other products. View detail
Caliper to brembo
[How is it used?
TZr250R (3XV) I bought this in conjunction with changing my Caliper to a brembo Crab.
There are several banjo bolts available from several manufacturers, but we chose this product made by Active, which we have used several times in the past.
Was the one you received as per Image?
Black has no face white, and other colors are also available. I've added color!" I chose Plating because I didn't want to make a statement like that.
The price is slightly different, but I am quite satisfied with the combination.
Was the installation difficult?
It is easy to assemble, but be careful not to forget to put in the washer.
Also, because it is aluminum, it may leave marks if handled with appropriate tools.
How was your experience with it?
Used with ACPerformance line Brake hose and Brembo crab caliper.
You can't feel the difference with the Banjo bolt, but of course there is no Fluid leakage.
The Plating product was too clean, so the other rusty Bolts stood out. (Lol)
Wiring holes are also available, so you can Wiring if you are concerned.
[Included Parts:were they on?
Two Washers are included as described in the product description.
This is helpful because there is no need to prepare separately.
【Review】
Naturally, it can be used with Brembo caliper without any problem.
The color selection is good, but I am a little concerned about fading due to sun exposure.
View detail