![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: SUZUKI SKYWAVE650 burgman, SUZUKI GLADIUS650650, SUZUKI GLADIUS650400, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI WOLF125, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400, SUZUKI ST250 E Type
Gamma's OEMChamber requires 4
[How is it used?
RGV250Γ (VJ22A) The new one was replaced with a new one for the ChamberMaintenance of the
How was your experience with it?
This was the first time for Gamma to install and remove chambers, but the description said that 4 chambers were required, so I purchased 4 chambers as described.
One SideQuantity on the Flange side and the Engine cylinder side between the chambers:2pc. I used 4 of them for sure because I need Set.
I installed it with a light Gasket and so far it is working fine with no exhaust leaks.
How did it compare to other products?
It was not particularly good or bad.
[Points to note]
At first, it is difficult to install because the direction of installation is upside down!
It is better to stick with liquid Gasket and replace it. (Large strange to take it later, though).
【Review】
It was cheaper than OEM and functionality was fine.
For OEMChamber, 4 pieces are required, but for external chambers, it is usually Quantity:2pc. Set, or maybe even none.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110
KITACO Exhaust Gasket
Exhaust Gasket for ADDRESS V100
ADDRESS V100 that needs to remove the chamber not only when replacing the chamber but also when replacing the rear tire.
Buy Exhaust Gasket Stock because I want to keep it.
I have used KITACO products in other vehicles and think they are reliable.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
SR400Exhaust pipe replacement
The texture feels cheap compared to OEM Product, but there are no exhaust leaks.
I thought, "Can't I reuse the exhaust pipe and silencer at least once? However, it is very troublesome to re-install the exhaust pipe and silencer after the exhaust leak is discovered, so we will not be stingy and replace them with new ones every time.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
In reserve for Replacement
I bought this as a spare. I will probably purchase more soon! View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
I was prepared, but ….
The Gasket could not be removed and was reused, although it was inexpensive and ready to go. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
Exhaust System Replacement
Product Name
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
Item Number
963-2000005
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
To replace Exhaust System
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
not particularly difficult
How was your experience with it?
There does not appear to be an exhaust leak.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
To CT110 HUNTER CUB
Installed together with Exhaust System replacement. After the installation, there was no exhaust leakage. Don't forget to replace the Gasket when replacing the Exhaust System. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
Perfect fit, quality product
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Cospa is good
Scooter has to remove the exhaust pipe every time we change the rear tire, and we try to replace the gasket each time, but the price of OEM products is high. I have been searching for a more cost-effective product.
This is not a product where you will notice a difference in performance, but because it is a consumable product, it meets the objective of keeping the price low.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
It's usually good
OEM is Quantity:2pc. You need to buy a Set, but this is Quantity:1 Set of 2pcs. so it is slightly less expensive. I recommend this product because there are no exhaust leaks so far. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Quantity:Seeking 1 pc!
I used this Gasket when replacing the exhaust system on my CRF-125F. However, I think it would have been better if I could have purchased it as a single item and at a lower price since I use only 1pc. of the Gasket for CRF-125F. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Used with CUB110
Used on JA10. It is a normal Exhaust Gasket.
Some people don't change it, but I think it is better to change it properly.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA BENLY50 PRO, HONDA BENLY50, HONDA Byte, HONDA TODAY, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA ZOOMER, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA GYRO CANOPY, HONDA GYROX, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA CREA SCOOPY
Thank you.
No problem
Easy to use
Thank you.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
It's still good
I have been using this product series from Large Motorcycle to Moped for a long time.
I do not use the old ones because there are no exhaust leaks and they are inexpensive, so I feel comfortable installing new ones every time I use them.
If you are concerned about the possibility of exhaust leaks after reuse, the safest thing to do is to use a new one.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
Great product
Fits perfectly on my CB1000SF '94, I am not yet sure though if it's really a one-time use as advertised. Nevertheless, product is great. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250, YAMAHA DIVERSION600, YAMAHA DIVERSION400, YAMAHA XZ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ750D, YAMAHA XJ650
Exhaust pipe replacement consumables
[How is it used?
The exhaust pipe of XJR400R was replaced and the exhaust gasket was also replaced.
We purchased a reliable and trustworthy KITACO gasket because OEM gaskets are expensive.
How was your experience with it?
First of all, as others have written, it does not fit exactly, but there is a little gap, so if you leave it as it is, it will fall off.
I had a Liquid Gasket on hand, so I applied a thin coat and installed it in place of a bond so that it would not fall off.
By tightening it, it will widen slightly and firmly prevent exhaust leaks.
How did it compare to other products?
It is no different than the OEMs that have come before.
[Points to note]
Quantity:1 Set of 2pcs. so naturally, Quantity is required to use for XJR400R.:2 Set purchase is required.
【Review】
It is just a Gasket, so it does not have any special characteristics, but you can be sure that you choose KITACO products.
It is less expensive than OEM, but no particular problem.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
easy to use
I think the tightness feeling is good. The package is too large. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
No problem
The product is good only because it is made by KITACO. It can be used without any particular problem, and the quantity:I think it is cosmetically good with 1 set of 2pcs. View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/images/76915/w963xgk_image_std2xa0_TS.jpg)
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
Just size for old Motorcycle
HondaA-AF09Courreges TACT used in 85 years.
I was worried about the availability of KITACO products since I have a very old motorcycle, but I am glad that KITACO has their products.
When I removed the Exhaust System and saw it with the original, it was Just size and really helped me out.
The old Gasket is an old 2Cycle and I thought it was too large when I removed it, but it was attached to the exhaust system and I was able to remove it quickly with a slotted screwdriver.
The Gasket itself has the same structure as the OEM parts and is KITACO's product, so we can use it with confidence.
I have only driven about 100Km after installation, but I have tightened the bolts and there is no exhaust leakage.
I would like to say thank you to KITACO for continuing to stock Parts for old cars.
View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Quantity at the same price as OEM:1 Set of 2pcs.◎No complaints about the quality of the product.
I used it to replace an OEM Exhaust System with a Third Party Full Exhaust System.
Due to various circumstances, it had to be reinstalled and the included Quantity:2pc. We will be using both Set.
Price
This product is the same etc. price as OEM Gasket.:2pc. It contains Set's Gasket.
Performance
As mentioned above, the Full Exhaust System installed on the Gasket had to be removed for various reasons, so we looked at the Gasket and found that it was properly crushed without any cracks, so we can say that its performance as a Gasket is sufficient.
Unless you are an OEM, I think you should buy this one.
View detail