Reviews
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
Eve Smile
I purchased it because OEMParts is discontinued, and I have installed it and so far there seems to be no problem. View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
I bought it as for Repair!
[How is it used?
I bought this for Repair because it was getting old.
When removing and installing the Exhaust System, do not use the previous one and replace it with a new one, or it may cause waste leakage.
How was your experience with it?
I think the quality is the same as OEM in a good sense.
No glitches at all, no problems at all.
How did it compare to other products?
Compared to the OEM Product, it can be used without any particular change.
Durability seems to be no problem.
[Points to note]
Since the CB1100 is a 4-cylinder, the Quantity:2 sets are required
▼These parts are not susceptible to deterioration over time, so it is a good idea to buy them in bulk during Sale.
View detail
Fits: KAWASAKI VERSYS 650, KAWASAKI VULCAN400S, KAWASAKI VULCAN400S, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-10R, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 650, KAWASAKI ER-6n
It is somewhat cheaper than other products, and I think especially that they are satisfactory good goods also to use.
It is somewhat cheaper than other products, and I think especially that they are satisfactory good goods also to use. View detail
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
R1-Z ChamberGasket
I used KITACO Gasket for R1-Z because the OEM one is quite expensive. I think the product itself is well made and good, especially for those who change the chamber from time to time. View detail
Fits: KAWASAKI VERSYS 650, KAWASAKI VULCAN400S, KAWASAKI VULCAN400S, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-10R, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 650, KAWASAKI ER-6n
When replacing the Exhaust System, be sure to use a new one.
Whenever I replace the Exhaust System, I always use a new one. At that time, this is a cosmetically good choice. View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
Exhaust System Replacement
Reliable manufacturer's product. No exhaust leaks, easy installation!
I always use this product when servicing and replacing Gasket.
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
Used on a CB400SF 2016 nc42
As Title
It works fine
The regular price is 550 yen including tax, so the WeBig is priced as is.
Amazon sometimes sells them for around $400, so I guess it depends on Timing.
I use CopperGrease to attach the exhaust pipe to the engine side before using it.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Yoshi Yoshi
Quantity:1 Set of 2pcs. would be appreciated.
Since the parts are invisible, the durability will be known much later.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Any vehicle.
I use it every time I replace or remove the Exhaust System.
Quantity:It is kind of nice that it is 1 Set of 2pcs.
I guess it would be better to use OEM, but it would take a long time to order, and these are usually sold at supply stores and motorcycle shops.
good point
The number of lineups in the ●Size.
● Quantity:1 Set of 2pcs. so if you use one, you can Stock the rest.
● Easy to obtain.
Accuracy and quality are fine.
A bad point
● No.
Exhaust system replacement is of course a good idea, but if you feel that the fuel mixture is a little strange, you may also want to suspect the Gasket.
Use and reuse are strictly prohibited.
View detail
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
Consumables at the time of Chamber replacement
[How is it used?
TZr250R (3XV1) This was used in conjunction with the Chamber replacement of
I chose KITACOBrand because I felt comfortable with the name KITACOBrand and there were a lot of Impression.
Was the one you received as per Image?
Quantity as described:1 Set of 2pcs.:It is 1 Set for 1 Vehicle, so it is easy to use.
How was your experience with it?
It is a conforming product, of course, but the size and feel, etc., were perfect.
There are no exhaust leaks and it is perfect.
Since it is a consumable item, it is essential when replacing the Chamber.
[Points to note]
It is not limited to this product, but it is good to apply Liquid Gasket as a countermeasure against exhaust leakage if you are concerned about it because it may shift when installing the Chamber.
How did it compare to other products?
Exhaust Gasket for 3XV is quite limited, but I purchased this product based on price, evaluation, etc.
【Review】
Quantity:It is available in 1 Set of 2pcs. and has no performance problems at all.
Although almost no one buys OEM products, they are very inexpensive compared to OEM products, which cost more than 2,000 yen per pc.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Necessities for Exhaust System Removal/Installation
The exhaust pipe had been installed and the flange was bent due to over-tightening.
The Gasket was still crushed and stuck to the Cylinder.
With the Pick tool, I forced it off by sticking the Pick while pulling on the Gasket.
Cylinder was cleaned with foam Carburetor cleaner and Dustcloth, and exhaust pipe was cleaned with Oil stone.
When installing the Gasket, it is best to install it on a slightly inclined surface with the Front facing up so that the Gasket will not fall off.
Put in a new Gasket, tighten the exhaust pipe by hand, and set the Quantity:Pair (for Left and Right) Tighten it to even etc.
If you get to the point where it will not tighten, adjust the exhaust pipe up or downQuantity:Pair (for Left and Right) The first time, the client shakes the machine to see if it is settled. Then tighten it again by hand.
When it got to the point where I couldn't tighten it anymore, I tightened it with an Offset wrench at about 90-degrees to 180-degrees to even etc.
If there are no exhaust leaks, the system is complete.
I think it is loose, so I recommend checking regularly or double nut. If you tighten it too much, it is not the end of the world.
I did not take pictures of the work since it is a friend's vehicle.
View detail
Fits: SUZUKI BIRDIE90 (4Cycle), SUZUKI BIRDIE 80 (4Cycle), SUZUKI BIRDIE 50 (4Cycle), SUZUKI BIRDIE 50 (4Cycle), SUZUKI BIRDIE 50 (4Cycle), SUZUKI GAG, SUZUKI GS50, SUZUKI GS250FW, SUZUKI DR-Z70, SUZUKI DR-Z50
Maintenance
Used when the exhaust system is removed for maintenance.
Quantity:2pc. The price for the Set is cheap.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Used to replace Type 3 Grom Exhaust System
It was a little difficult to remove the NORMAL Gasket, but after 10 months of exhaust system replacement, I managed to get it off by prying it with a slotted screwdriver. When I took it off, I found that it was in a tattered and battered state.
It was the first time to replace the exhaust system, so I can't compare it with the normal basket, but it didn't stop on the exhaust system side, so I had to use my fingers while putting it on the exhaust pipe. Quantity:It's set. (I did this because I failed to apply Silicon grease with a dot, but there may have been a better way. Maybe there was a better way.)
After that, I drove about 100 miles and checked it again, and it was fine.
View detail
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
Used on GSX-R125
Purchased KITACOGasket to replace OEM exhaust system with external exhaust system.:I don't have many chances to remove the exhaust system, but I keep 1pc. as a spare. View detail
Fits: KAWASAKI KDX200SR, KAWASAKI KDX125/SR
It matched.
Product Name
KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
Item Number
963-4000006
Vehicles
KDX125SR
Number of man-hours
About 10 minutes
Why did you choose this product?
The OEM chamber broke, so I bought a Gasket to replace it with a spare chamber.
Quantity, including spares:2pc. SetI wanted to get this product.
Impressions after using it
There is nothing much to say about the quality and comfort of the product, and it can be used normally.
There has been no exhaust leakage from the mounting area, so I think the product is functioning at least as well as it could.
▼ Attention
When installing the gasket, apply a thin layer of heat-resistant gasket to the cylinder, and you will be able to install the exhaust system without difficulty.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Quantity:1 Set of 2pcs. is useful.
I remove the Exhaust System several times a year for maintenance.
In that case, I always replace the Gasket, so I use this product.
Quantity:It's a set of 2pcs. but it's reasonably priced, easy to use and very useful.
Each time Quantity:2pc. When I have used the first set, I try to buy more so that I always have some in stock at home.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
To replace the exhaust system on my MONKEY125!
I used it to replace the exhaust system on my Monkey 125. It installed without any problems and no trouble.
It is made by a reputable manufacturer, so you can use it with confidence.
View detail
Fits: YAMAHA MAJESTY125, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X, YAMAHA Axis Treat, YAMAHA BWS125(BWS)
No problem
I have been using KITACO Exhaust pipe Gasket for a long time.
I've never had a problem.
I suppose you could use a cheaper one, but I want to use it with peace of mind.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Cost performance
I'm sure there are cheaper ones out there, but these are KITACO's so I can use them with confidence. View detail
Fits: SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI COBRA, SUZUKI GSX400, SUZUKI GSX400, SUZUKI GSX400, SUZUKI GSX400, SUZUKI Across, SUZUKI RF400, SUZUKI RF400, SUZUKI NZ250
Purchased to replace the Oil Element
I have a custom Exhaust System, so I bought this product to remove the Exhaust System and replace the Oil Element. There is no exhaust leak and I can trust this manufacturer. View detail