Reviews
Used as anchor bolt for REBEL250
It was used as an anchor bolt for REBEL250.
Recent Motorcycle has no Loading Hook because of CostCut.
It will be installed as a retrofit, but the car-specific products are quite expensive,
We think it is a good idea to use such a Universal Product.
This product comes with a 30mm Bolt, but with a slightly shorter exit allowance,
A separate 35mm Bolt will provide the same amount of output as the OEMBolt.
(Even Bolt with "Included Parts:" can be used as long as it is firmly tightened.)
One note on installation.
For OEMBolt, after removing one part, temporarily fasten this product and then remove the next part.
If you remove the Bolt holes in two places at the same time, the Bolt holes will shift, making it difficult to install and licking the Screw holes.
Also, the OEMBolt is tightened at a ridiculously high Torque, so it is hard to loosen the Bolt.
If you find it difficult, you should honestly ask Shop for help.
View detail
I am concerned about Bolt's Size.
Here are my impressions after installing on a Triumph SpeedTWIN1200.
Since there was no place where a Net could be attached, it was installed in the form of replacing the Bolt on the Rear suspension.
The work was easy and securely installed, and the Net is now ready for use.
Also, the texture is adequate for the price.
I bought Black, and if I wanted, I would be happy if the center Bolt was also Black.
Bolt size was a concern during installation.
The length was fine, but the diameter was slightly smaller than M8, and I was a bit concerned about the possibility of the mountains licking if I tightened the screws too hard.
(It may be correct to say that the Frame side may be just slightly larger than the M8, so it is not an outstanding match when installed on SpeedTWIN.)
I'm generally satisfied.
View detail
PoshNet Anchor
I bought it because I like the color. The paint has not peeled off so far. View detail
Installed on all owned Motorcycles
The Bolt that comes with the Number is Rusty, so I always replace it with this product. View detail
Parenthesis looking good
PointI was close to the expiration date, and I had been wanting it for some time, so I took the plunge and bought it
I like it because it matches the color of my motorcycle However, I wish there was a plastic washer on the mounting part of the motorcycle to prevent scratches I thought
View detail
Beautiful
I have them on all my motorcycles, Defferential Gear Because the Volt in the faux is rusty and dirty
I haven't used it as a Hook, but I like it because of the texture
View detail
5 stars
Z1000 ABS 2017 Model has a Loading Hook with Tandem Footpeg Just at the base of the!
Naturally, there is no storage space under Seat, etc
I thought about using touring net when I was trying to load up a few things, but Loading Hook is missing
And I arrived at this product To install it, just remove the license plate's bolt nut and replace it
It's a piece of cake in 10 minutes It's a relief
View detail
I am useful.
SEROW's Adventure Carrier's Frame is too fat,
Net or code hook is not applied.
OEM Product is so expensive that it's OK with that.
View detail
No damage when attached
I had attached Silver so far, I replaced it to Black according to the color of Body.
Originally it is a modest Size, but it makes me feel less noticeable by making it Black.
M8 × 30 mm Bolt is attached, but in the case of YAMAHA BOLT Shoulder Bag, Length is not enough for 30 mm.
It is recommended for those who do not want to add Saddlebag.
View detail
Buy without loss
I bought it in preparation for Hokkaido Touring.
It is used as Loading Hook in the License Plate to raise the loading capacity.
With this, it is now possible to tie baggage to the extent that Tail lamp is not hidden on Rear Fender.
I also feel like playing a part in Dress-up style.
However, I think whether it is a little expensive personally.
It is not something to make tens of thousands of yen ^ ^;
View detail
It is convenient to have it
I bought DOrange, but because there was some red color and the color tone did not match, I used it painted in Orange color.
Easy to install, easy to use.
View detail
Klx, dTRACKER 125
The Rear Fender of klx, dTRACKER 125 has rigidity because it contains iron Frame, and if you replace the installation Bolt of License Plate with this Hook, baggage will be loaded even without Carrier. It is recommended not to be heavy. View detail
To hook on Hook!
Ideal for hook hooking. Since there are several colors, it is GOOD that you can choose your own car and color of your choice!
However, because the attached Bolt was not necessary, it is cheap Spec. I thought that there was. Depending on the installation location, it was disappointing that Bolt was long or short, and Bolt's purchase increased separately.
View detail
For Rubber string with hook - - -
I am satisfied with the results, but the price seems to be a bit high. And, is it just my own Motorcycle, Bolt included, we purchased Long bolt separately without reaching ♀ Screw. From such a circumstance, if it seems to be able to choose Bolt's Length, Bolt is not attached and it is suppressed in price, it becomes a product with a high CP value and it is Large welcome.
If so do you ★ 5 tickets?.
View detail
To ensure unity
I was hooked in Bolt hole of Tandem Footpeg when hanging Net on my luggage
I purchased it because I burned my finger at the base of Silencer when I removed it
By attaching it, you can surely shorten the time required for packing
I think that it will become Dress-up as rich lineup of colors is also available
View detail
Texture is good!
Because of resin Tank with a lot of curved surface, Tank Bag is hard to use, I use it for Loading Hook of MONSTER S2796.
I liked the design of Tandem Sheet Cover and I did not want to remove it, but this one is attachable without removing Cover, and it is useful as an emergency use when the package has increased at the destination.
I do not feel uncomfortable in appearance, I think that I will not mind even if I leave it on.
If you put the baggage in the same way, it is safe to use a non-slip Seat so that it will not slip off and slip off.
View detail
Since the Hook which fixes a Touring net etc. is insufficient on the outskirts of rear ones of Ninja250R, it purchases. Since mounting instruction is only exchanged for the Bolt which is fixing the Number plate, it is very easy. Although g
Since the Hook which fixes a Touring net etc. is insufficient on the outskirts of rear ones of Ninja250R, it purchases.
Since
mounting instruction is only exchanged for the Bolt which is fixing the Number plate, it is very easy.
Although
goods purchased red, a color is becoming thin by degradation now when it uses in several years.
As a result of attaching this product, it came to be able to perform fixation of a Tandem-step portion, a pure rear Hook Number-plate portion, and a total of six Touring nets.
Since the
load is stabilized and can be fixed, it is large satisfaction!
View detail
It replaced with the top captive screw of the Rear shock of CB1300 SC40, and attached. Although it will use as a loading hook originally [ ], a built-in Hook is just before a Rear shock, and since that one is larger and easy-to-use, it is not functio
It replaced with the top captive screw of the Rear shock of CB1300 SC40, and attached.
Although it will use as a loading hook originally [
], a built-in Hook is just before a Rear shock, and since that one is larger and easy-to-use, it is not functioning as a loading hook.
I think that the
thing of the texture of an Anodized itself is also good, and it is a good thing.
-- in short, it uses how -- or .
View detail
Since the Fender less was used and the authentic positive Hook was lost, it purchased. It attaches to the Number plate. It is also a little Accessories.
Since the Fender less was used and the
authentic positive Hook was lost, it purchased.
It attaches to the
Number plate.
It is also a little Accessories.
View detail
The tandem belt was removed, attached and carried out. Although it may not be so practical in location, I think that he is smart as a one point. Also when riding, it did not become obstructive in particular. I think that I will look for the ne
The tandem belt was removed, attached and carried out.
Although it may not be so practical in location, I think that he is smart as a one point.
Also when riding, it did not become obstructive in particular.
I think that I will look for the net or rope which can be used in this location.
View detail