Reviews
Fender Eliminator, Center cover can be installed.
There is a Carrier with a Pipe extending to the Tandem Footpeg, but I prefer this one in terms of design if it can be attached so Firmly.
The center cover can be installed, and the Bracket can be inserted and put back on before installing the Carrier. However, the Screw holes in the Bracket are half blocked, so a slight modification is necessary.
It is equipped with DAYTONA's Fender Eliminator Kit, but it can be pontoon-mounted.
I like the balance with the SeatBack.
View detail
Balance of quality and price...
[How is it used?
My friend's younger brother bought a new SEROW250Final edition without a rear carrier. "Let's go buy the parts we want to install!" I went to the Motorcycle Accessories store where I went and bought this Rear Carrier because it was the only one they had in stock.
Was the one you received as per Image?
In hindsight, I could have chosen many things including design etc. if I had chosen at Webike... or rather, my friend and I did. You might as well pick one from Webike's or mail order, right?" I advised him to do so. I want to buy the parts I want and install them right away." and Tension seemed to be higher. I'd rather buy something now than wait a little." I was forced to do it like that.
Rear Carrier functional parts are working fine.
Was the installation difficult?
As mentioned in others' Reviews. Can be used with OEM Assist Grip. In reality, however, the clearance between the Assist Grip and the Carrier Bracket is too narrow to allow for easy access, so modification is required.
In this sense, it is difficult to install, but if you give up the Assist Grip installation, the difficulty will be reduced (the bolt length is also included in the package and is large and strong).
How was your experience with it?
As mentioned above, there is no problem with the functional part as a Rear Carrier, and the box can be installed.
but the Design is It's like a sturdier version of Carrier for Motorcycle." I'm too plain with my...
Moreover, the Gold amount is not one of the cheapest, and to tell you the truth. If I was willing to pay this amount of Gold, I would choose a Carrier from another company with better parenthesis. It's like
[Included Parts:were they on?
The CarrierBody, collar and bolt necessary for installation are included in the package, so if you do not use the Assist Grip, you can install the CarrierBody with this product alone. (If you use the Assist Grip, you will need a collar of appropriate thickness and a longer bolt to accommodate the additional thickness.)
[Was there anything that disappointed you?
Price and Design・・・・It is hard to say how much people like the look of the product, but I think the position of the Assist Grip, which makes it difficult to use if it is attached as it is, is not well thought out for a product that costs this much in gold.
Other items that would be helpful
Point and hang of installation
If the base for the box is to be installed from the beginning, it is better to install the base on the carrier before installing the rear carrier on the car body, so that the work can be done smoothly.
[Availability and clarity of the Instruction Manual
It is an easy-to-understand product.
[Notes]
As I have already mentioned above, there are some points to note when installing the OEMAssist Grip and the Bolt mounting holes are slightly gapped (individual difference range?). It is safer to do a temporary assembly in advance.
[ITEMS TO BUY TOGETHER
If you plan to install the Rear box, it is easier to purchase it together and install the Base first.
[Opinions and requests to Manufacturer
It would be helpful if you could improve the accuracy of the product... or lower the price.
View detail
Looks sturdy ??
The instruction manual was well written, and it was installed without any modification.
However, it says to remove the Center cover, but nothing is mentioned in the installation. ?? It can only be installed with it removed. (I don't think it will be installed)
It was a little unkind.
View detail
usually
Installation is not that difficult according to the Instruction Manual.
It's working fine.
Carriers are available from a variety of manufacturers.
I chose KIJIMA.
HURRICANE was waiting for delivery, so...
View detail
Useful for Touring.
Since I like Touring large, I wanted Carrier, and I wanted something solid with a casual design, so I decided on KIJIMA's.
Easy to install. It's strong and neat.
good point
You can load about a folded 1 person tent.
You can use it without spoiling the atmosphere of the car because the plating is elegant carrier.
Easy to install and comes with Instruction Manual.
●Feels like an OEMOption.
A bad point
None
When I do touring, it is not possible to translate empty-handed, and it is tired to carry a bag on the back.
In such a case, I recommend that you use a carrier and keep your luggage together.
View detail
Doesn't the 2018 SEROW have a Fit?
Spacer and bolts of Included Parts:The one which is not in the instruction manual was included. But it is impossible to install the "RearTandem grip" at the same time because it interferes with the "Rear Fender". After all, I did not wear the Tandem grip. Well, I don't mind because I was able to reduce the weight. Also, the bolt is too short to tighten the bolts on the back side. I like the design because it's light and Slim, but like other reviews, it didn't seem to take into account the 2018 model year. View detail
Necessities for improving loading performance
Motive for purchasing
Top case to improve the loading performance of VTR250 (Injection model) I was looking for a rear carrier to attach a Originally, I avoided using the Rear Carriers and Top cases because I thought they would detract from the design of the car body and But SeatBack doesn't allow for Tandem, and always have rain gear and Helmet I decided to install the Top case from the advantage of being able to store the Rear Carrier situation I chose this product as it was the lowest priced and dedicated product as I was not particular about the
About the product
Installation is easy as it is exclusive to the type of car
To install it, just tighten it with the Loading Hook attached to the car body If you have Hexagonal Wrench, you can install it without any difficulty The installation accuracy is also perfect because it is a famous brand and the hole position was perfect without gap
Surprisingly, Design is not bad
When I installed the CarrierSingle Body, it felt even quicker than I expected The Carrier itself, like CUB and AdventureMODEL, was not Because it doesn't have a firm look to it, I personally feel that the design of the body of the car is compromised to that extent It was not The Loading Hook, which is also on the Carrier, is useful
The durability is unquestionable
The top case has a 47-liter (size for two full face helmets) I installed it, but I've been using it for many years and I've been on a long touring trip overnight to change clothes, rain gear, and souvenirs We tried to fill the Case with a lot of luggage, but the Carrier was broken, etc I think there was some vibration there because it is a V-twin engine, but there was not I think it is durable enough for normal use
Paint peels off
The paint of Carrier peels off because of the Bracket that binds the Base of the Top case It is a bit of a mess, and rust has developed from it If you're concerned about rust, it's probably best to deal with it as soon as you find the paint peeling
View detail
Great trunk
Great trunk! Excellent quality in its original packaging. The mounting kit was in the box. I got up like a native, no complaints! I will order more. Great trunk! Excellent quality in factory packaging. The mount kit was in the box. I got up as a native, no complaints! I will order more. translated by Google Translator View detail
awful
Even though I bought the one for the CRF250L, the mounting holes didn't fit at all
I will have to give up the installation and buy another Manufacturer's one
View detail
Thank you for making better products
The attached Flat Washer is Quantity : 1 Set of 4pcs. There should be two but only two were included. Since the number of days passed until the installation work, I decided to buy it myself separately.
Whether the BodyFrame is slightly distorted or the Screw hole is misaligned, or some of the original OEMScrew becomes difficult to tighten after installing Carrier.
Highly precise product development and products and Included Parts : Please thoroughly check the inspection.
View detail
Let's keep the Large load capacity
Mounting on z 125 for givi box installation.
Fix the carriers so that they sandwich them in the Frame.
From the other Manufacturer, I purchased it because it looks clearer, but has it exceeded the Large load capacity a little bit
The fixed place of Frame and Carrier has been scratched.
Please observe the maximum load capacity and use.
View detail
Bolt seemed to lose Bolt due to the positional displacement of the hole
CRF250L (2014) We mounted on. The creation of Carrier itself is very solid and satisfying.
On the other hand, installation is easy and only sepapping Bolt and CarrierBolt are replaced with four carriers attached to Carrier Bolt. However, since the position of the Bolt hole of the carrier and the Bolt hole of the car body were delicately Gap, I was very worried whether the Bolt tightening was very cramped and I could not lick the threads. After all it was tightened with a hard screw lift but I wanted a little more precision Up.
View detail
Very versatile carrier
The Carrier works great on a Ruckus, provided you remove the stock taillight bracket. But you can add a tail light underneath this one if you desire. Will carry a 12 pack of beer easily, or doubles as a table while one the road. View detail
It is exclusive for car models, but needs correction
It installed in GSX 250R. I have decided not to go out as much as I can choose, so I decided at the price.
It is a product of Mr. KIJIMA, but it was accuracy like a product of some country.
I fix the front side of Carrier which is not used under Seat, but the Bolt attached can not be attached if the Pitch of the Carrier and the Pitch of the car body are different by about 1 cm.
Pantograph jack modified to make Carrier wider and installed. It's too bad because it's not JAPAN?.
Although modification is necessary, other than that it can be installed easily. I do not think the Tandem seat will float.
The painting is beautiful, but the making is cheesy. Although it may be useless from the price - -
Strength is now to come, but I think that Large is sturdy because it is quite solid.
I'd like Carriers for now, I will recommend some modifications to those who OK.
View detail
High Cost performance
There are not many commercially available Rear Carriers for BURGMAN 200 and few options.
Other carriers look nice, but I chose this Carrier for the following reasons.
- STAND bar (Grab Bar) Do not remove
- Sports Bag It is easy to tie a small package with an Elastic band
- It can also be used when adding a Top case
View detail
Rear Carrier 210-241 not fitting on YAMAHA SEROW 250 model 2017
I just purchased the rear carrier good for 5 kgs and it should fit on the Serow 250. But it is not the case. Now I am still waiting for their feedback to solve the problem. Not really happy by the after sales service as I immediately report it with pictures and the reply was: Thank you for using Webike Japan. We are sorry to inform that we cannot identify the item number you claimed. Here are the items you ordered for g00000097409N1. Please let us know the item number. We apologize for any inconvenience this may have caused. I have created an account with webike.ph so how come they cannot identify the item in my order history? View detail
The shape is warble but it is solid accordingly
I chose this product because it can be attached simply by cutting out a part under the Seat without doing troublesome processing such as drilling a screw hole in Cowl and attaching Bracket.
I was able to install it in less than an hour.
Although the shape of Carrier is a bone, I think that it is solid accordingly and I think that some impossible is Large durable.
Eventually I plan to purchase a Top case, but for now I will attach the Seat bag of GOLDWIN.
View detail
Although it was not a compatible model, only with this carrier - - -
I have been looking for a Carrier attached to my KSR 2 for a long time.
OEM Carrier for KSR 2 and Carrier of Raflo are making holes in Rear cowl - - - Although I did not like it, I bought a cheap Carrier of Made in Thailand, but even though I bought it, it was distorted, the position of the hole was sloppy, and further, already around Rear (Fender and Blinker) As I replaced it, the installation Bracket struck Blinker and shifted Blinker (Redraw around Rear) Whether you are going to choose to process Bracket or not, and until then you have to use Bracket that seems to be problematic in strength - - - I could not install Carrier in doubt.
Basically, this Carrier of KIJIMA was a Carrier that can only be installed in the KSR PRO series since 2013, but it has the same structure & strength as the Multi Wing Carrier of DAYTONA which is used for ZEPHYR 750 and has a structure of trust , Including the attachability to the car body, at a glance "If you can only have this Carrier!" I made a preliminary examination for installation.
Looking at the difference between KSR PRO and KSR 2 after 2013, the mounting hole of the Bracket of the Seat part seems to be no problem, the difference is that the position of the hole of the Belt mounting part on the Rear side. It seems like a hole misalignment of just a few centimeters, so I felt that if I processed the Bracket position on the Carrier side, I seemed to manage it somehow, so I tried purchasing this Carrier with no good idea.
After all, because the Seat part was not wanting too much Cowl side Cut when installing this carrier, so that Cowl's Cut was set to the Smallest, I installed the Carrier attached bracket (welding) Then rebuild, the AssistBand part also looks for Pipe that fits the screw and aligns it to the car body (Because I did not want to pinch Cowl, Cowl part somewhat extended the hole and inserted Color) We welded to Carrier and finished it.
(Incidentally, reinforced welding has been done since the Bracket of the installation Nut part of the Frame of the Band part seemed weak too)
Although my poor fecal welds were scraped cleanly and devastated by Black paint, they could safely be installed, there was no problem for actual use, easy to remove, easy to remove, excellent in design and excellent in strength (In order to use GIVICase, there is no need for Hook, it was enough to drill holes to install the Base) I am satisfied with this Carrier Large.
Still more KSR 1 - 2, and Owner who is riding the Large thing before 11013 before 11013 think that you can also see Owner, so I would like KIJIMA to consider selling this Carrier corresponding to that.
View detail
Simultaneously with KITACO made Fender Eliminator Kit
I decided to buy it by looking at various Net and saying that it can be installed simultaneously with KITACO made Fender Eliminator Kit.
The purpose is to attach a box.
I think the performance is good because the loadable range is 5 kg enough.
It took a while to install because it was installed simultaneously with Fender Eliminator Kit,
Accuracy and Instruction Manual were enough so we could cleanly install it.
I put it on, I removed the Black plastic on top of the Stop lamp and could not be installed,
Plastic could be installed with a little processing.
If there is no Plastic, it seems that there is free rainwater between Carrier and Blinker?
I thought that the direction to install putting explanation of processing etc if possible is good.
View detail
Is it the strongest in Carrier that can be attached to the D-Tiger 125?
【What made you decide the purchase?】 Because it was the most robust construction among the carriers that can be attached to the D-Tiger 125. Also, there was an impression that it was unnecessary to cut Side cowl.
【How was it actually used?】 Since the mounting Bolt 4 points are in the right position, it is fixed and Firmly fixed, the construction of the Carrier itself is also solid. Hunter × WorldWalk's 32 liter Box was put on, but it is also compatible with fixed Bolt with Carrier attached to Box. For this point I will attach an image so please check it.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Bolt hole accuracy is also good, so there is no difficult point.
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please tell me if there are any improvement points】 None.
View detail