Reviews
High quality
Purchased for reverse mounting a swCondor Handle on a w650.
I was prepared for this, but it reduces the angle of sharpness immensely.
UTurn is harder to do and considerably less maneuverable.
It was only de Tune, so I removed it as fast as I could and gave up on the reverse attachment.
But the product was polished and very beautiful. You can't see it once it's installed, but w
It was a good experience.
View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
Texture is good!
SR400 (1JR) I installed it on a Magura Separate handleSpec. car in the
I kept it off the vehicle for a while, but during this time I heard that Handlebar Lock is now being checked at vehicle inspections in my area, so I installed it along with the company's Handlebar Lock for the purpose of vehicle inspection and to prevent theft when the vehicle is stopped.
We felt that the quality was on the high side, even though it was inexpensive for an Other Brand Product Handlebar Stopper.
For installation, the company's Handlebar Lock and Quantity:It took about an hour to install with Set.
View detail
The handle lock which had been given up in using a separate handle became possible in combination with the top bridge of the company. It was impressed considerably!! It is recommended!!
The handle lock which had been given up in using a separate handle became possible in combination with the top bridge of the company.
It was impressed considerably!! It is recommended!!
View detail
It attaches, and it is easy and structure is also solid.
It attaches, and it is easy and structure is also solid. View detail
Quality WM Wellington
Convenient to install with Bolt On to the three-prong.
No complaints about the quality. It is also good that the Left Side Handlebar Lock can be used with the company's (WM) Top Bridge.
However, since the Optical Axis Adjustment Bracket is also co-tightened at the same location, the optical axis should be readjusted.
Also, if you are using a Blinker Bracketetc. to be installed at the same location, it may be better to use a Handlebar Stopper to be installed on the Frame side for better fit.
View detail
The quality is good. But.
It is a very good product.
I think it is a very good product in terms of structure, finish, and texture.
However, I think the mirror finish on the exterior is excessive considering the area of use.
I'd rather have something like a Matte finish to make it less noticeable.
My personal hope is that
I wanted the Handlebar Lock to stop at the limit of its usable position.
We did some DIY work to shave the lock contact area and adjust the contact position so that we could use the Handlebar Lock.
However, with this adjustment, we were able to use the Handlebar Lock on our Handlebar to prevent the Handlebar from hitting the Tank, but the situation may vary depending on the Handlebar used, so it does not mean that this product is bad.
View detail
Since I changed my style to a cafe racer, what I need!
Since I changed my style to a cafe racer, what I need! I like WM, so I bought WM parts. But I don't know what kind of mistake I made... I bought two... It's uncomfortable because the angle of the handle is too narrow. The handle of the cafe racer is short. It's dangerous if the handle is big. I have to install these parts. If you want a cafe racer, make sure to buy it! View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
It's easy to install and has a nice texture, but …
I used it with the DAYTONA Vintage top bridge Handlebar Lock failed
What's wrong with your vehicle?
I was able to lock the Handlebar without the Handlebar Stopper
The thing itself is not bad
I'm going to try adjusting it with Washeretc
View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
Nice
We bought to install separate steering wheel. To install a separate handle, you must not have just the handle. You must have a short cable for brake, throttle, clutch, decompression, and a handle stopper, which is of very good quality and is unlikely to rust. Installation is very simple. You only need to connect two bolts. I bought a three-rate handle to install. You should not only have a handle to install the three-rate handles. There must be a short cable for brake, throttle, clutch, or compressor, and the handle stopper must be present. This handle stopper looks very good in quality and does not rust. The installation is very simple. You only have to connect two bolts. Translated by Microsoft Translator View detail
The texture is high
The appearance is high texture. However, since it is Handlebar Stopper, I do not see it at all after installation. Also, it is easy to wear it with existing Bolt as well.
I use it with ESTRELLARS 's OEMHandlebar backwards, but with this Stopper alone, since Handlebar still hits Tank, I've added my own Stopper.
View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
I think that it is quite good
It is best to avoid rusting with Stainless Steel.
Installation does not cause problems for about 30 seconds
I think that it was still good if half price.
I do not know the angle because I still wear it and do not throw it away, but I'd like to ride a test ride
View detail
The Handle lock became possible. Required, if a Separate handle is used.
The Handle lock became possible. Required, if a Separate handle is used. View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
The Parts which is certainly needed in carrying out a Separate handle. A place [ a Handle lock is made because differing from a Stopper besides equips together with the same Top bridge made from WM, or a Handle lock ]. When the Handle lock which te
The Parts which is certainly needed in carrying out a Separate handle.
A place [ a Handle lock is made because differing from a Stopper besides
equips together with the same Top bridge made from WM, or a Handle lock ].
When the Handle lock which tends to be given up because of the
Separate handle or carrying out a Main-key move is made, user-friendliness is quite better than other Stoppers.
View detail
This item is used to reduce steering range in order to prevent handle switch sets bumping gas tank when taking turns, especially when using clip-on handle bars (or what here calls separate handle bars). It is made of stainless steel with excellent welding
This item is used to reduce steering range in order to prevent handle switch sets bumping gas tank when taking turns, especially when using clip-on handle bars (or what here calls separate handle bars). It is made of stainless steel with excellent welding and build. It is perfectly fit. View detail
Since the Tank and the Handle interfered when using the Separate handle, it purchased here. When removing the Emblem of the Tank, the crevice got bored somewhat, but the method which is turned off since he did not want to remove, and lessens an angle
Since the Tank and the Handle interfered when using the Separate handle, it purchased here.
When removing the Emblem of the
Tank, the crevice got bored somewhat, but the method which is turned off since he did not want to remove, and lessens an angle was chosen.
When using together with the Top bridge of WM, it became a motive which that a Handle lock is made also purchases here.
attachment was very easy with two Bolts.
Although
piece angle decreased, there is no trouble in particular during operation.
parking etc. change and, sometimes, it is troubled for a while.
View detail
Fits: YAMAHA sulfur oxide (SO, SO2, etc.), YAMAHA SR400, YAMAHA SR500
[webike Monitor] It purchased for formation of Separate handle. Since it went out and an angle was lost more than it considered, it Removes only with a Fitting, the board of an Aluminum is processed, and the Handle was kept from hitting
[webike Monitor] It purchased for formation of
Separate handle.
Since it went out and an angle was lost more than it considered, it
Removes only with a Fitting, the board of an Aluminum is processed, and the Handle was kept from hitting a Tank.
I did not have necessity, even if it used the Separate handle.
Since it goes out truly and an angle is lost, when you use it on a public road, please
Take care and operate.
View detail
For making ST250 into a separate handle, it is indispensable. However, although Locke can seemingly do it in the top bridge for separate handles and combined use which cannot use a handle lock, they are four stars now at the point which is not sold.
For making ST250 into a separate handle, it is indispensable.
However, although Locke can seemingly do it in the top bridge for separate handles and combined use which cannot use a handle lock, they are four stars now at the point which is not sold.
View detail
Although it had equipped with the Peyton thing before, WM was used this time. Form and finishing accuracy think whether to be above Peyton. Although it attaches to the place which is not conspicuous, since it is buffing, it is quite beautiful.
Although it had equipped with the Peyton thing before, WM was used this time.
Form and finishing accuracy think whether to be above Peyton.
Although it attaches to the place which is not conspicuous, since it is buffing, it is quite beautiful.
Moreover, although Peyton processed it a little at the time of attachment, it arranged without processing here.
If it is a trouble in either, the recommend of the WM will be carried out.
View detail