Reviews
just the right thickness
The OEMChange rubber had been worn and worn out since the vehicle was purchased used, so I decided to go with this thicker, better-looking rubber.
The replacement was done by cutting a slit in the original rubber so that it would not hit the shift lever, tearing it open, removing it, and then inserting a small amount of silicon spray into the inner diameter of this rubber. The length was not cut, and the size was Exactly.
I was satisfied with the new design, which is a little thicker than the original OEMRubber and easier to shift.
View detail
Stand out! Good durability!
I used it for SUPER CUB's Change Pedal. It is durable and does not wear off easily even after heavy use! The price is reasonable and you don't need any tools to replace it, so I recommend replacing the OEM change rubber if you change your mind or if the OEM change rubber has deteriorated! View detail
the expendables
It has been about 10 years since I backstopped my GB250 CLUBMAN, and the change rubber is getting tired, so I decided to replace it. I used Silicon spray because it is hard to put rubber on Change Pedal. I can't feel anything, but the new one is better. View detail
Rubber thick!
It was a bit pricey, but I bought it at the Shop because it didn't seem to be in stock at WeBig.
I have a GB250 CLUBMAN with Back's Tep, but the Rubber is worn out and I think the Rubber thickness is a bit more Shift change feeling (I just put it on and haven't run it yet). (I haven't run with it yet, just put it on.) It looks more durable because of the thicker rubber.
View detail
For discontinued Rear Sets
I have been using it on my Rear Sets Shift and Brake pedal, which are no longer available. View detail
Replace them when they deteriorate!
Since we are always stepping on them with our feet, even these things deteriorate after a while of use.
The old one did not come off by pulling, so I cut it off with Cutter.
When installing, spray Parts Cleaner and push it in, as it is difficult to get in without it. Do not stop halfway, but push it in before the parts cleaner dries.
After the replacement, it is easier to change, I think? (Laughs)
The shape is the same as the OEM one and only the rubber part can be replaced.
View detail
KIJIMA Change rubber
It can be used as a normal Change rubber. View detail
The color (Red) will transfer to Boots (you'll get it), but it's cool!
The color does transfer to the Boots, but it can be removed by wiping with Towel.
Just because the Change Pedal has changed from Black to Red (the same color as the car body), it looks really cool.
For OEM Change PedalRubber deteriorated! It gives a Custom feel and more than you can imagine!
It's a RECOMMENDATION because it's going to be cool!
View detail
One point!
I have not changed it once (25 years) and I wonder if it is deteriorating. View detail
Thick Change rubber
Installed on a GSX-R1000R 2019
I originally used BabyFace Rear Sets and replaced the Change Pedal and Brake pedal tips with G-Craft End Shaft/Rubber.
The G-Craft end rubber was worn out, so we purchased a replacement.
When combined with the G-Craft end shafts, there was no problem with the ponting of both thickness and length.
If it is hard to put in, spray it with Parts Cleaner and you are all set.
If it is loose, it is easy to wiring, so I think it will be no problem.
The shape makes it easy to cut, so if there is excess length, it can be easily adjusted.
It is an inexpensive and generally easy-to-reach end-Rubber.
The G-Craft pedals I was using originally looked SMART, but the rubber was too hard, and the part where I stepped on the Shift Pedal side was worn away, making the pedal look stenosed.
On the other hand, this one is thick and rugged visual, but I like it because it is Race ish.
The car has been driven a fair amount since the replacement, but at this point there is no sign of wear.
There is no particular slippery feel, and the thick-walled Rubber feels gentle on Boots.
Incidentally, although I wrote that it is thick and rugged, it is about the thickness normally seen in OEMPedals from various companies.
The price is low, so I think I will Repeat this next time it wears out.
Since it is compatible with a wide range of pedals, it would be a very promising option when considering the replacement of end rubbers that have deteriorated, or if you are not satisfied with the shape.
View detail
Rubber in Blue
This is my third purchase of this product ChangeCushion rubber.
Red→Black→Blue in that order, this time Blue (all the same thickness)
There were Black, Red and Blue, and Blue was cheaper than the other colors.
Red is Black and stains are noticeable when using it, so Black was a safe choice for me.
The reason for the thicker diameter is that it has a longer wear life than the thinner diameter.
Each person's preference for thickness depends on his or her own Shift change Fee Ring.
Black is a safe choice for Motorcycle color matching.
View detail
It was used for [Webike-monitor] CB400SF SPECIII. Since an authentic positive one deteriorated, it worried about an original manufacturer's product and exchange, but it exchanged for this product as a one point of a joke. As it is, since it is lon
It was used for [Webike-monitor] CB400SF SPECIII.
Since an authentic positive one deteriorated, it worried about an original manufacturer's product and exchange, but it exchanged for this product as a one point of a joke.
As it is, since it is long, it has cut into the same die length short with it being pure.
When attaching, it dips in a molten bath, and if a rubber makes it soft, inserts a silicon spray or lubricant and blows on a portion, it will be attached very simply.
View detail
Cushioning is good and Change is easy!
[How is it used?
I replaced the OEM Rubber on the Change Pedal, the cushioning is better and the change is easier.
Was the installation difficult?
I'm using it through an 8mm Bolt so it was easy to just thread it through the Bolt.
How was your experience with it?
The inner diameter is just 8mm. The outer diameter is 20mm, so it was larger than what I had imagined, but I think it's just right for the Cushion.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The texture is cheap for the price.
View detail
Outer diameter is Large threshold
[How is it used?
I use it in place of the Cushion in my homemade BrakeExtension bar.
Was the installation difficult?
I'm using it through an 8mm Bolt so it was easy to just thread it through the Bolt.
How was your experience with it?
The inner diameter is just 8mm. The outer diameter is 20mm, so it was larger than what I had imagined, but I think it's just right for the Cushion.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The texture is cheap for the price.
View detail
Dress-up。
If you would rather replace it with OEM Product, how about Dress-up? View detail
In conjunction with the replacement of consumables
Diverted to STRIKERRear Sets
Other than the Rubber part, Quantity:It's cheaper than the Repair Parts set that comes with it, so it's less expensive than the worn out rubber parts As an exchange of goods
In addition, you can change the color of the rubber part as custom parts
It's too humble a product, but Merit is a lot
There is no instruction manual included, but the chain cleaner When you blow it and make it slippery, you only have to twist it in, so you don't think it's necessary and the price is held down by this that doesn't come with it It doesn't matter if it's been established
View detail
Surface White Rune!
I installed it in BEET's HYPERRear Sets.
When the inner diameter is Small two times, the outer shape is one size larger and larger, the length is also not matched at all, so cut carefully with Cutter, it was possible to install it without difficulty.
Although it is a thing of the level of Dress-up, I feel that it became easier to understand when my feet became gorgeous and when I put on a foot.
View detail
Stand out prominently at a rabbit
I had previously purchased Footpeg Rubber and Kick Starter Rubber, but I found this later
Purchase. It is conspicuous to the rabbit. Around footpeg became flashy.
Bring it to a noticeable shop.
My CUB is exchanging Shift Pedal for things of BENLY CL 50.
View detail
I looked for it..
Shift Pedal of my own SR 500 and Rubber of Brake pedal searched in this form in this form, but it was not there. When we were watching KIJIMA 's Parts by Wei Big it happened to find and bought it. Rubber's deterioration is quick so I was saved. View detail
Easy installation 15 seconds
I feel a little uncomfortable if this part is deteriorating.
Gold amount was also appropriate and installation was easy. Since it degrades and Rubber part throws away anyway it cuts with Cutter and pulls out this product
Just thrust. So it's 15 seconds from Cut to work end. Gold amount is also cheap so it is enough for performance.
View detail