Reviews
design fault
As others have said in their Reviews,
The Right Side Pipe shaped fixing is 5mm longer than the Right Side,
It will not stick properly as it is.
This is also the reason why the shape is often described as distorted in Amazon Reviews.
The part of the front side that is co-tightened to the Seat fixing hole also extends 5mm outward as it is,
Bolt is not tightened normally.
If the hole on the Frame side of the APE is 5mm Offset in the Right Side only.
I can see why it has this dimension, but our 50FI is a Quantity:Pair (for Left and Right) Symmetry.
Is it different for older year APE's?
So I did a 5mm Cut on the Pipe. Now it can be installed normally,
The Carrier itself is also properly fixed to the Center.
View detail
Style good
It is still useful to have a Carrier. It is useful for a small amount of luggage. View detail
The ally 笙ｪ with load capacity strong for remarkable low Ape
The ally 笙ｪ with load capacity strong for remarkable low Ape View detail
Be careful how you install it!
Seat Boltetc. It's OK to use and install it, but if you tighten up one part tightly, it's hard to get the other bolts in Be careful
The whole thing shall be temporarily tightened before final tightening
The paint is weak, so it peels off easily and rusts easily
If you are installing a rear box, you need to be careful because it will not be level
View detail
Too much accuracy
I've never had this happen with any Parts I've bought, but all the Mounting Bolt No matter how I try No matter how I try.1,Quantity:2pc. I used it without the Set on, but I took it off immediately I will never buy this Manufacturer's Parts again View detail
Why design to Gap to Right Side?
It is 5 mm longer to fix to the Fender of the car body Right Side, of course Gap to Right Side when installed.
Since the attached Screw also contains 5 mm differing items, the design "Intentional Gap" I think that it is not clear why it is such a design.
When looking from the back, Gap with Logo of Stop-lamp and Seat's HONNDA is quite conspicuous.
Although it carries out the minimum function of loading a certain degree of loads, this Gap is not very desirable from the viewpoint of mental health.
Explaining Gap in detail,
Car body Left Side has Carrier 's Pipe directly above Blinker attached Bolt,
Body Right Side has Pipe on the outside of Bolt's Bolt.
View detail
nice construction and finishing, this is quality product.
i purchase this carrier for my hybrid ape 150 project, and overall fitment is spot on, build quality seems good, coatings are even. the bends of the pipe is also very good, quality product for sure. 4 bolts and 1 bracket are included in the box, also 1 small kijima logo/decal. overall very happy with the purchase, you got what you pay for, will update again after using this for some time, thanks webike for competitive price and discounts! View detail
The bend is disturbing.
Since Rear is bent, there are Parenthesis, but it is hard to add a Rear box.
If it is attached as it is, the fixed pla of the Rear box will bend and it is likely to be damaged.
So I dropped the plastic cutting board of about 8 millimeter thick which I bought at Home center in the place I got down and pinched it.
However, since it is supported by three points compared to other manufacturers, is it easy to distribute the load?
Painting is easy to peel. (We repair by odds with Body pen)
View detail
I installed it in a good feeling!
There was neither twist nor paint was beautiful.
If you want a greedy manual, I think that you can attach it more easily.
The installation time was about 30 minutes.
Packing was polite as well from order to delivery.
I will try again if there is opportunity.
View detail
Firmly
Because it is a split type, I was concerned about the strength somewhat, but it is pretty solid.
When installing, the position of the hole was Large sturdy, but the width of the part to be tightened with Seat did not fit, and it was hard to spread.
View detail
Many thanks for the article! Planning a long trip without a boot would be very bad ... Came up perfectly. Installation spent about 20 minutes. Written that the maximum load of 3 kg but I think it easily withstand 10!
Many thanks for the article! Planning a long trip without a boot would be very bad ... Came up perfectly. Installation spent about 20 minutes. Written that the maximum load of 3 kg but I think it easily withstand 10! View detail
The sheet and the Rear fender were removed and attached.It completed in about 30 minutes, reading the description.The woman has also attached easily.
The sheet and the Rear fender were removed and attached.It completed in about 30 minutes, reading the
description.The
woman has also attached easily.
View detail
Since it has ridden on the APE and was always afflicted by loading nature, it obtained by making it purchase this time. Although some prices are stretched, it is dramatically satisfied with j strongly structure.
Since it has ridden on the APE and was always afflicted by loading nature, it obtained by making it purchase this time.
Although some
prices are stretched, it is dramatically satisfied with j strongly structure.
View detail
It attached to ape100. Although the object vehicle type given in Mr. [ webike ] had become a statement called ape100 (-08), it seems that it is real ALL-MODEL correspondence since typeD had also been corresponding at the instruction manual of the pro
It attached to ape100.
Although the object vehicle type given in Mr. [
webike ] had become a statement called ape100 (-08), it seems that it is real ALL-MODEL correspondence since typeD had also been corresponding at the instruction manual of the product.
Unlike
others' thing, it becomes a sheet attachment part, a Sub-frame attachment part, and a three-point stop of the Clamp (addition) to a Sub frame.
Although paint application and welding of the
products were beautiful, when attaching to our vehicles, the hole position of the inner one Bolt of four Bolts attached to a car body did not suit easily.
It seems that attachment may not go with Pons attachment by individual specificity although it is able to attach by some corrections.
If even
hole position suits exactly, I will think whether DIY beginners can also attach.
A tool required for
attachment is only several Wrenches and Hexagon wrench of a Millimeters size.
I think whether to be a product which we can recommend to you, since a Quality is also high as
products.
View detail
Since a load etc. did not ride at all, the APE purchased this product. -- it was attached very simply and I weak of maintenance have also attached! since I have performed also making firmly, it can use in comfort -- ^o^ -- if it s
Since a load etc. did not ride at all, the APE purchased this product.
-- it was attached very simply and I weak of maintenance have also attached! since I have performed also making
firmly, it can use in comfort -- ^o^
-- if it says by force, paint application will feel that it is a little weak.
View detail
It purchased to commuting.It has equipped with the 26-liter VOX of GIVI. Once, since it is 3 km of withstand loads, I think that how much it has has room for improvement, but the VOX can be attached satisfactorily.
It purchased to commuting.It has equipped with the 26-liter VOX of GIVI.
Once, since it is 3 km of withstand loads, I think that how much it has has room for improvement, but the
VOX can be attached satisfactorily.
View detail
It purchased on the occasion of a long-distance Touring. Since FTR does not have a Space which stacks a load, it changes very well only by attaching a Carrier. Although it is heavy at iron, I think that rigidity is reliable as compared with the product
It purchased on the occasion of a long-distance Touring. Since FTR does not have a Space which stacks a load, it changes very well only by attaching a Carrier. Although it is heavy at iron, I think that rigidity is reliable as compared with the product made from an Aluminum. View detail
He wanted to attach a Rear box and it was purchased. although the place whose screw hole never suits came out when attached -- -- the screw hole was able to be united and attached forcibly after all. Since it had been curved by
He wanted to attach a Rear box and it was purchased.
although the place whose screw hole never suits came out when
attached --
-- the screw hole was able to be united and attached forcibly after all.
Since it had been curved by
back, when the Base of the Rear box was attached, the
Base also curved, and that was right and it gave up attachment of the Rear box.
Since it thinks
That back curvature is also a safety catch of a load in a part to carry the
load and to fix in a Net, it is satisfied with the function as a Carrier.
View detail
Since it is smallish from the first, does it seldom change? Well, it is a grade as Massey rather than there is nothing.
Since it is smallish from the first, does it seldom change?
Well, it is a grade as Massey rather than there is nothing.
View detail
Not much, functionality is not considered, but is purchased and used from the only same reason for being black as a body. Since one year passed about, I would like to report. Since free is an ape without loading power, carriers are indispensable i
Not much, functionality is not considered, but is purchased and used from the only same reason for being black as a body.
Since one year passed about, I would like to report.
Since free is an ape without loading power, carriers are indispensable items, considering how to use me.
Although it went for touring several times, for the moment, fault has not come out.
In addition, since the noticed point does not have the level heavens side of a carrier, even boxes cannot be carried well.
Maximum allowable load cannot stack 2 K and a big load.
If I, an amateur, also have even a spanner and 6 angle wrench, it can equip with attachment in 10 minutes.
Occasionally, it may be YURUYURU if slack of an attachment bolt is not checked.
Is it such a place?
But since it is the carrier which made investment which is not cheap, was purchased and is used, I continue wish to carry a load carefully so that it can use long.
View detail