Reviews
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
Easy!
It can be used for both navi110 and PCX150. It is cheap and not bad. I guess it's not so bad, but it's not that bad. View detail
Easy to install
Installation is really easy, taking less than 10 minutes. The texture is good, and the Pipe on the thick body is a nice parenthesis. If I have one complaint, it is that it is not designed to be installed with a helmet holder, even though it is an Endurance Carrier. Other than that, I am satisfied. View detail
For peace of mind
Purchased to protect myself and justify my own driving while driving on Motorcycle.
The product was relatively easy to install and complete.
It took some thought to run the Camera wires through the interior of the car body, but the rest of the connection was completed in comparative perspective.
The recorded images are clear and secure with no problems.
There is no GPS function, but the situation is satisfactory enough if you want to check the driving conditions.
View detail
High quality is realized, seems to be very practical.
[How is it used?
Myself, I don't like Guard, but to use it as a base for fog mounting.
Was the one you received as per Image?
Impressed with the cleanliness and precision of the finish. I think it is a good product for the price.
Was the installation difficult?
The 3 Bolts that suspend the Engine are replaced with the attached special Bolt, so basically, a Jack is required. I think it is easier to work with a smaller Jack.
How was your experience with it?
When I installed it and got on the car, I was impressed by the very high quality of the assembly, which was nicely aligned with the lines of the Radiator cover, as shown in the photo. I was very impressed with the high quality of the assembly.
I have never tried to rub it, but it seems to do the job of PROTECTION well.
[Included Parts:were they on?
The instruction manual is, well, easy to understand.
[Was there anything that disappointed you?
None in particular
Manufacturer conformity is after 2020, and Initial Model does not seem to conform.
The pipe diameter is 25.4mm, so the LED fog bracket fits a wide range of brackets.
LED fogs are in the works, but I will add them when they are installed.
I thought about installing the fogs on the handlebar, but since the R's sibling has a heavier headlight assy than the R, I did not want to add any more weight to the handlebar.
View detail
Fits: HONDA CBR250R, HONDA HRC GROM, HONDA HRC GROM, HONDA CBR250R, HONDA HRC CBR250RR, HONDA HRC CBR250RR, HONDA GROM
Drain bolt
Fast shipping, nice packaging, will repeat ordering parts again, About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125
Convenient
The one on the PCX160 is a GIVI one, which I inherited (old) from a number of others, so it's a bit useless.
I knew the newer ones have advanced in terms of keys, locks, ease of removal, etc.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
We should have done this from the beginning.
I used to use a lever with a parking brake, which is a type of brake that you push into the brake lever.
Screws loose and slipping on hills etc....
I had to re-tighten it each time.
And if you tighten it too much, the Stop-lamp stays on.
Lever fades and rattles, and I'm sick and tired of the inferiority of Chinese products.
I reverted to OEM Brake lever.
I found this product on YouTube, purchased it and installed it.
Installation itself is very easy.
The effect is also Outclassing
Why didn't I buy it sooner?
View detail
Fits: YAMAHA MAJESTYS, YAMAHA MAJESTYS, SUZUKI GSX-S125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM
Good!
[How is it used?
Purchased because there was no bar to install the Smartphone Holder.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Just tighten with a Hexagonal Wrench. It was easy.
How was your experience with it?
I have had no problems at all and it has been good to use.
[Included Parts:were they on?
Included Parts:itself was not originally there. No problem.
[Was there anything that disappointed you?
None
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-R125
I am satisfied with the quick delivery and excellent quality!!
I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. -------------------------------------------------- -------- I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. Powered by Google Translator View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
The construction is good.
Material:Stainless Steel and well made.
However, I think that about 4,000 yen is appropriate at the highest.
Instruction Manual is also paperless and not included.
View detail
Great Looking Engine Guard
Out of all the available engine guard in the market, this Endurance Engine Guard blends in the best with the bike itself. Standing afar, you would not be able to differentiate the guard from the black original frame. The tapering of the guard creates a very nice flattering silhouette. Love it very much. View detail
Gusseted and safe to use.
It has a GIVI Box weighing about 3 kg and is used to load shopping.
Gross weight of 8 kg giri (Sensation) There is no particular problem, although there are occasional instances where it becomes
The material is solid when pressed down, the material is reasonably thick, and the welds are beautifully well welded, so it is safe to use.
View detail
Good multi bar!!
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
Fits: HONDA cross-cub 110, HONDA cross-cub 110, HONDA Super Cub 110, HONDA Super Cub 110
CenterCarrier for CROSS CUB
Various CenterCarriers for CROSS CUB are available, but I bought this one because I thought it was the most practical.
Mount bar is also available for mounting whatever you like.
Small objects such as rain jackets can be placed and secured with a small fixing net such as for MotorcycleNet.
Helmet holder can also be attached.
DAYTONA in the photo. [Helmet Holder Replacement Parts] Holder Body
Belt and other bags can also be attached.
The photo shows a magazine supplement.
View detail
![[Exclusive for Race]Under Cowl Set](https://img.webike-cdn.net/catalogue/images/88795/el64126pr1_01_TS.jpg)
ENDURANCE [Exclusive for Race]Under Cowl Set
Molding quality and texture is fairly good its to be expected from fiberglass resin made. I like the fact it comes with all the mounting hardware which makes installation easy. The blue markings i made on the product are areas i need to grind or cut off due to my exhaust set up which i am very aware of before purchasing it, i knew i would be modifying it to make it fit. Product was well packaged and protected. I would advice anyone who purchase this cowl to be aware of what type of exhaust set up you have and be prepared for minor modification but if your a Do It Yourself like myself, it shouldn't be difficult to work around modifying it. On a side note you will need to paint it with the color of your choice as well. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
![14. Grip End Cap [Grip Heater HG: Repair Parts]](https://img.webike-cdn.net/catalogue/images/30252/08T50HANE21_1_TS.jpg)
Hole concealment of fret & mdash;厶
Holes were drilled and painted Silver. View detail
Fits: HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA APE TypeD, HONDA CBR125R, HONDA CBR150R, HONDA CBF125F
feel well
The more you grip the lever, the more it works. When the lever is suddenly and strongly applied, the front fork sinks suddenly, so I think this type is easier to control. I don't know about the durability of this type. I would prefer a more flashy color to give it a more custom look. View detail
Oil catch tank
It looks good
However, water accumulates so quickly that it is not enough.
Perhaps it is just a tube.
You have to clean it frequently.
We believe it will be effective and we will use it.
It was difficult to install the hose, but I was able to do it myself.
View detail
Very sturdy piece of front rack.
It is mounted to the front fork and thanks to that it won't move a bit. You could even grab it a move your bike holding it. I would argue you could even sit on it :))) Very happy with this product. View detail