Reviews
3rd same thing
I am riding the Honda CB1100EX for the 3rd time.
This is a knee grip pad that I always buy and use every time I ride.
First of all, the design is clean and the colors are toned down.
It goes well with most bikes.
It provides a very stable knee grip when going around curves. -------------------------------------------------- -------- Honda CB1100EX is only the third generation It is a niglip pad that you must buy every time you ride. First, the design is clean and the color is down down It goes well with some bikes. Very stable Ngrip is caught when you go around the curve. Powered by Google Translator
View detail
great for the price
The Takegawa product was too expensive, so I chose it while looking for a replacement.
Good quality but almost half the price.
Adhesion is better than expected due to the double-sided adhesive method.
The size is just right, so it's perfect for monkeys.
It is definitely a very good product for the price. -------------------------------------------------- -------- The product was so expensive that I was looking for a substitute and chosen. Good quality, but the price is almost half. The adhesive power is more than expected by two-sided adhesive method. The size is also appropriate, so it is compatible with Monkey. It is certain that it is a very good product for the price. Powered by Google Translator
View detail
It can be used normally
It is a Universal Product, so there is nothing special about it.
I don't know about durability, but the texture itself is good.
I have the impression that there are no particular problems with the tightness.
View detail
Less slippery.
I stuck it on my CB223S.
My knees were slipping during Brake, but now they are less slippery.
Quantity because it was too appropriate at the time of pasting.:Pair (for Left and Right) The effect range was reduced when the position was shifted in Rear Sets and the effect range was reduced when Rear Sets were used.
If you want to tweak things, it would be safer to put it on later.
View detail
I think it's good
I bought ESTRELLA's Tank because I Re-painted it.
The area is large and can be firmly affixed, so it will be safe to use.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Focus on appearance
The knee is less likely to slip, even though it is a
Knee grip is also easier to get right.
If you accidentally spill and drip Fuel1, etc.
Wipe it off immediately or you'll get sticky Tape.
Be careful, it will come off. to Service station
There was no dustcloth, and I couldn't wipe it off even if I wanted to.
The diagonal has lost a little stickiness…
We have similar products in Thin Brown.
Depending on the color of the car, it may be better for you.
It might be stylish.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
If Rear Sets are installed, the effect is Large.
After installing Peyton PlaceRear Sets, my knee bend angle has changed and it is harder to get a good knee grip. This is a problem for short-legged Riders.
After installing this product, my problem is solved. I like the classical look of the product as well as the ability to hold the car during acceleration and deceleration.
If I had to say so, it would be easier to use if it were a little thicker, but the price of SROwner's Separate Handle and Rear Sets is very reasonable, and I think it's worth a try.
View detail
Perfect size!
I love this knee grip pad! It great because I think it has the best proportions in relation to the tank. The tank looks very long on its own and this knee pad cuts down the long blank space and provides a great accent. It will also protect the paint job from pants abrasion specially during long dirty rides. The adhesive seems to be of high quality as well. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
For Normal tank, this is the one.
The Normal tank is Flat, so it's hard to do the Knee Grip, and in the winter, my feet are cold when I put the tank between the tanks.
I love it.
good point
Shaped to fit the dimensions of a Normal tank.
Reduction of vibration transmitted from the tank.
Retro look and feel. It fits in nicely without the feeling of being retrofitted.
Knee grip is also easy.
A bad point
The tape is very sticky, so be careful when peeling it off.
It has been around for a long time.
It is safe to use, and is also a recommendation for those who are touring or aiming for a classic look.
View detail
Small (Too small)
I confused and tempered the small version, so it looks scanty, fortunately the tank is without a pattern. And so, the quality is good, they perform their function
(quality is good, but too small for SR tank) -------------------------------------- -------------------- I mixed up and ordered a small version, so they look a little bit, fortunately the tank without a pattern. But the quality is good, they perform their function
(quality is good, but too small for SR tank)
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Cosmo
I thought it would fit different motorcycles since it is a SR pad, but I think it fits a lot of motorcycles and is very universal.
It's a good feeling to see it on my motorcycle.
It's a little bit difficult to grip the knee because of the thickness of the rubber until you get used to it, but once you get used to it, the grip is very good and it's easy to turn without slipping when you grip the knee. The effect is Large.
Because the real thing is a little smaller than the Image of the photograph, it is fat if you do SizeCheck.
For the price, I think it's pretty cosy.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Cheap.
It is a good product for a little dress-up. View detail
I used Magnet Sheet.
I didn't use the double-sided adhesive seat that came with the car, but I tried the strong magnet sheet of Kojo that someone reviewed. It is a very good thing to be able to remove it easily, but because it shifts after all while driving on the road where winding, especially Tight corner is continuous, I change it to the adhesive Seat straightforwardly. The pad itself is thick and has a good grip. The appearance is suitable for VTR. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Wound concealment of the Knee grip of the Black Tank.
I bought this to hide the knee grip part of the tank on my ZrX1200 DAEG, and it was a good decision to put this on because the knee grip part of the tank is black and the abrasion is easily noticeable. I'm not sure if this is the right product for you, but if you want to use it on other models, you'll need to make sure it matches the shape of your tank. Also, the double-sided tape that comes with this product is very strong.:Pair (for Left and Right) If you don't match the position of the paste firmly, it is Large strange (sweat).:Pair (for Left and Right) position Gap, but I compromised! (Lol) View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
A classic from the past.
I put them on for looks and to make knee grip easier.
To install, simply attach to the Tank side with Double-sided Tape.
The Normal tank is slippery and slippery when you have a knee grip.
good point
It's a classic that's been around forever.
Cheap.
It is easy to grip the knee because it is not slippery.
The appearance also becomes Classic.
A bad point
When you peel it off, it's hard to take it off because of the persistent glue. It's better to use neutral detergent.
This is an old standard. I think it's a reasonable part because it looks good and it makes knee grip easier. I've been riding SR for 20 years now, and I'm still wearing them.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Use Magnet Sheet instead of Double-sided Tape
Instead of Double-sided Tape, I used a strong Magnet Sheet with single-sided adhesive, bought at Monotaro.
Now you can remove it freely & it won't damage the tank. The adhesive strength is enough, no problem.
Recommended for those who use steel tanks.
However, even if you put this on the TS185ER Tank, it is too thin to grip the knee.
View detail
I love the VINTAGE look!
[Usage]
Vintage off-roader style custom BRONCO
Dress-up + Knee grip to make it easier
【Motivation or reason for choosing or purchasing
I've been looking around for Vintage off-roader images, and I've found Silver colored
I often see vehicles that have BlackRubber's Tank Pad attached to the tank.
I see you.
I'm going to try to imitate such Style for my BRONCO.
I was looking for a Tank Pad of appropriate size and design.
I found this product.
I bought it immediately because it was much cheaper than the budget I was expecting.
When installing
The Double-sided Tape of the same shape as the Pad part is attached, and it is possible to use it with the Pad.
The method was to paste it on both Tank.
The procedure and work itself is very simple, but the position of the paste
I was very careful in my decision.
of time to find a good looking position to temporarily attach with curing Tape.
I feel like I spent most of it (laughs)
I thought that it would be less troublesome if Tape was put on the Pad part from the beginning, but is it some kind of production convenience?
[Fit & Feel]
I put it on, and it was perfect, both visually and functionally!
Because it works unexpectedly at the time of knee grip, riding became easy.
From various people when I was driving. That's so cool! I was happy to hear him say that (laughs).
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It's hard to divert anything other than SR.
It was exclusive to the SR. The shape is ExactlyFit to the SR's DropTank, and there is nothing that can't be attached to the SR's DropTank, but it is awkward.
If you're on a Minor vehicle that doesn't have a special product available, I think it's better to turn off the Stomp Grip.
You can't complain if you use it for SR.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
There is a Large difference between having and not having
After waxing and wearing slippery over pants, I couldn't find the right position to put the tank in, but after installing it, it's stable.
I had a hard time attaching it to my BANDIT250, but I turned it over and attached it to my car.
Make sure you degrease the car before installation
I've got about 1000k miles on it and it hasn't come off after touring and commuting.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
look better than ever
It's easier to grip
However, only the Right Side came off I don't know if it's because of the way it was applied or the quality of it, but I'm going to buy it again and reapply it
View detail