Reviews
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
Doppelganger indeed.
As you would expect from Doppelganger, a Quality called Doppelganger.
I used it for camping touring with SPACY100.
Waterproof was perfect, did not flood at all, even when driving in a downpour.
The capacity also put the Tent in the Left and the cookware in the Right.
Installation is also easy, as all you have to do is adjust the length of the three Belt pieces and insert them into the Seat.
I used it with Tarpaulin Side Bag and it was CinderellaFit without interfering with each other.
Quantity:Pair (for Left and Right) I felt it was easier to bend than usual, perhaps because I swung the center of gravity to the
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
PCX160 8BK-KF47 Mounting on
Purchased for daily use such as shopping for two and for overnight touring.
The installation is done with multiple one-touch belts, so anyone can do it.
However, if the Belt to be installed is Quantity:Pair (for Left and Right) somewhat on Seat's buttocks as it straddles the
Interference.
The capacity is large enough to hold a helmet and many other items.
The waterproof property is also excellent, so rain will not be a problem.
The flap (lid) is held in place with magic tape to make it waterproof,
This guy is super powerful. (Lol) The one-touch is not easy to open and close.
However, it is unavoidable in order to maintain the waterproof function.
View detail
Continuous ride time can be extended.
[How is it used?
Since the OEMSeat of 390DUKE has thin and hard Sponge, I decided to introduce it as an analgesic measure because my buttocks would surely hurt after long distance running.
Was the one you received as per Image?
It's a pastiche product of a certain Gel0b, but it's cheaper than Gel0b and comes with a 3DMeshCushion, which is a high Point.
Was the installation difficult?
It is very easy to remove the Seat and wrap the Belt with Magic tape around it. However, when attaching the Seat to the car body, you have to hold the Belt so that it does not gap, otherwise the GelSeat will not fit in the right position.
How was your experience with it?
At any rate, my buttocks no longer hurt after one hour of continuous riding, but they still hurt after two hours of riding. The footing is a little worse, but it is hardly a problem in practical use. In the case of my Riding Pants (made by Komine), the seat surface does not feel so slippery. The GelSeatBody does not gap while riding. At any rate, the intended pain-relieving measure was successful. Incidentally, I have not used the 3DMeshCushion of Included Parts:yet, so I have no impression of it.
[Included Parts:were they on?
Two Extended Belt are included.
[Was there anything that disappointed you?
It doesn't look great, but I guess it's just a matter of getting used to it.
View detail
Fits: Others , HONDA REBEL1100, HONDA REBEL500, HONDA REBEL250
Good CHIC appearance.
I replaced the Made of Leather Side Back with this one because of its insufficient capacity.
The bag is lifted up by the hanging rings, which are slightly lower than the bag support bracket, and the bag is spaced well from the exhaust system. The conventional side bag was attached in such a way that it hung down from the Bag Support Bracket, so this is also a good impression from Forme's point of view.
Since the product has just started to be used, the waterproof performance is yet to be determined.
View detail
For Earth Rock
[How is it used?
I use Disc Lock and Tire Lock, but I was looking for a chain lock that can connect a lock to a building.
Was the one you received as per Image?
It was just like the image.
How was your experience with it?
The chain is quite thick and well made, so it feels secure and has a great deterrent effect. The padlock part seems a little cheap.
[Points to note]
Not particularly.
How did it compare to other products?
Since this length and make of Chain is less than 10,000 yen, I think the cost performance is quite good. Even expensive products are stolen when they are stolen.
View detail
Fits: YAMAHA TRACER900, YAMAHA XSR700, SUZUKI V-STROM250, HONDA CB1100RS, KTM 390DUKE, HONDA Rebel250, Others
light (i.e. not heavy)
It is just the right size to hold a large Waist Bag. View detail
quite
It does not hold as much as expected. If you want more capacity, avoid this.
The long Wallet can be used, but it is not enough for a day touring or a casual trip with nothing in hand.
Most importantly, the cosmetics are great. It doesn't get in the way, doesn't flop around, and I like the way it looks!
View detail
It is still convenient.
I bought an extra one because it was so convenient:a combination of a LuminousPole 25mm, extended to the ceiling and fixed with Screws, and two additional Helmet Hangers. The only thing Minus is the high price. View detail
Petroleum smell!
I'm sure others have written about this, but it is a strong petroleum smell. It filled the room and I had to take it outside to the Small store. Regular washing did not improve it at all, so I soaked it with baking soda that I found on Net. If that doesn't work, I will wash it one more time with Sesqui Soda. If that doesn't work, I will throw it away.
By the way, when I rubbed lukewarm water with baking soda and laundry detergent, the water became Black cloudy.
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
Generally good.
I used a Cover in the $1,000s and it was so thin that it had a hole in it after six months.
The thicker, $2,000s Covers are too thick and scratchy to STIFF and BODY.
DAYTONA products are being used for CYGNUS, and they are small as per the Review.
This time Doppelganger decided to purchase the Side fastener because it is easy to install.
A little large for 600RR because of SSUniversal.
It is possible to squeeze in Band, but Band installation is a pain in the ass.
The wire lock hole is too small to feed the keyhole into the cover.
The fabric of Cover is thinner than expected.
Easy to remove because of handles in each section.
Durability remains to be seen.
View detail
I'm interested in the appearance and ease of handling.
As you said, the zipper is hard to open and I always have to use both hands to open it. What I disliked more was that the glue-like substance was like a frayed thread.
When I tried to remove it, the adhesion between the Zipper and Back peeled off and the Back was always open-mouthed.
Waterproofness and capacity are good if you don't mind the look, but for me the look, ease of use, and durability were a concern.
View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
handy defense
I put it on my SEROW. The length is just right, but the width is wide, so I think it will flap around on windy days. It seems to be able to protect against condensation, but the fabric is so thin that it may only protect against UV rays to a limited extent. The ease of hanging is very good, so it can be hung quickly and easily. View detail
MainZipper breaks easily.
MainZipper is too Large + Material:Plastic, and anyway, it is hard to open and close.
This caused the PlasticZipper to gradually wear out and eventually break.
The usage period is 3 months; there is a similar review on Amazon, which suggests that they have not done a proper durability test.
Doppelganger's design is good, but the development span of the product is too short or they do not conduct proper testing.
I hear MotorcycleTent leaks easily, too... I wish they'd try harder!
View detail
It is easy to use
I used to use Rough&Road's WaterproofSide Back, but it was a pain to open and tighten, so I switched to this.
I like the simple design and the easy loading and unloading.
View detail
Not only Touring, but normal use.
I'm happy with the look and the workmanship of the product. The back is facing down in any position because it is a type without a thigh band, so there is no spillage.
It seems unlikely.
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
Security features and contact with Exhaust System
1.Security:Quantity at the luggage entrance, like DAYTONA products.:Pair (for Left and Right) There should be a Fastener that can be closed from Both Sides and the two Fasteners should be stacked and closed with a Padlock. With this product, the Bag can be opened when the bike is parked, so some countermeasure needs to be considered.
2.depth (height) Adjustment:The bottom of the Bag is about to hit the Limit on the Exhaust System. Therefore, the depth of the bag is adjusted by tying the entire bag. It would be better to have a function of "Beltc." to adjust the depth from the beginning.
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
Attachment and fit is superb. Security is.
[How is it used?
...Purchased on October 5, 2023 for about 1 month. With rainfall
Was the one you received as per Image?
The product is exactly as shown in the image.
How was your experience with it?
As described in the product description, the cover is easy to put on and take off thanks to the large opening SIDE.
Since the vehicle can be checked only by opening and closing the SIDE zipper, I feel that it is easier for uninformed people to check the inside of the vehicle compared to the Cover, which is completely covered.
As the claim of "Fit", it covers from Mirror to Tire completely and just right.
Black, so a little dirt is not noticeable.
Resistant because it has not melted even if Cover is applied immediately after returning home.
The puddling of rainwater between Mirror and Stem that occurred during Y’S GEAR did not occur.
I need to fix the anti-slamming Belt at the bottom, so I have to bend down and stretch my arms. At that time, I am afraid of contact with the Exhaust System.
Fastener easily chews through the Orange fabric covering the fastener, so be careful.
Not rated because I am of the school of thought that locks do not go through Cover.
[Points to note]
Avoid contact with the Exhaust System when installing the Belt buckle.
How did it compare to other products?
*Comparison is Y’S GEAR, which was repeatedly used on a yearly basis. (YAMAHA) :Motorcycle Cover E Type (https://www.webike.net/sd/24026744/)
Attaching and detaching the Cover is easier and less time consuming with this product.
The front and rear strings can be pulled to secure the device in place. This product is mainly mentally scary.
Fit feeling was better with this product, and the weight of the water did not cause puddles in parts of the product to dip under the weight of the water.
The thickness is thicker and seems to be more durable.
The price of this product is often less expensive when discounts are taken into account.
The manufacturer that sells the Cover has the same appearance (Silver base with Blue front, etc.) for various targets such as Scooter, but this manufacturer sells only this Cover with the exception of the Inner, and it seems that this manufacturer's Cover has no security function that prevents identification of the vehicle type. However, this manufacturer sells only the Cover, except for the Inner, and the Cover of this manufacturer does not seem to have a security performance that does not allow the user to identify the model of the vehicle.
[Opinions and requests to Manufacturer
I would feel more comfortable if you sold Covers for various types of motorcycles, not just sports type motorbikes. (https://www.doppelganger.jp/product_list/cover_motorcycle/)
The ease of attachment/detachment and the fit of the vehicle are highly satisfactory as described in the product description. On the other hand, the ease of attachment/detachment and the fact that the security performance is inferior to other Covers due to the narrowing of the vehicle in the Cover state are a little scary.
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
good
It has a lot of capacity and keeps out the rain.
I think this Gold amount is a good one.
View detail
Fits: YAMAHA XSR700, YAMAHA TENERE700, SUZUKI DL1000 V-STROM1050, SUZUKI V-STROM250, SUZUKI GSX1300R, KAWASAKI NINJA250, HONDA Rebel250, HONDA CRF1000, Others , KAWASAKI ZX-11, KAWASAKI Z900RS, KTM 890DUKER
For REBEL 250.
I was riding a Rebel 250 with a side back, but when I was touring with my husband and carrying our luggage and buying souvenirs, I wanted more capacity, so I bought one.
I originally used the same Doppelganger for my Side Back, and I liked the design and feel of the Hook, so this Back is going to be very useful as well.
View detail
It was convenient for easy Touring!
Perfect for my Wallet and phone, which were bulky in my Seat bag+Pocket on Touring!
It doesn't have much storage capacity, but thanks to that, it was just the right size without getting in the way.
I like that it is easy to use.
View detail