Reviews
Challenge to Valve Matching
I bought this to Challenge for my first Valve Matching. I think it is good to try everything, but I personally thought that this area should be left to PRO. Also, I think it is not a good way to do it, but the Suction Cup is easy to come off from Valve. I think it is a good cosmetic product because it comes with two types of Compound. View detail
Shoo, Pushing, Shoo, Snap
Used for new Valve replacement work on CUB.
I had to replace my previous tacho bar because the Rubber had been ruined.
The feel of the product is the same as the previous one.
The tacho did not come off and could be worked normally.
It's not a task I do very often, but I appreciate being able to purchase it because I can't move forward without it.
It also comes with Compound, which is helpful.
I hope that the Red Lead used for marking will also be available in the size of the Compound included with this product.
View detail
No spare Suction Cup
As pointed out in other reviews, LargeSmallQuantity on the Right Side of the photo:There is no spare Suction Cup for 5pcs. each. Suction Cup at both ends with stick (LargeSmall1 each) and Medium Eyes, and Quantity of Fine Compound:Set. I have no problem with this because I was convinced to buy it.
I used it to match the new Valve on my VIRAGO250, the Large one is for the Intake Valve and the Small one is for the Exhaust Valve.:Set was really helpful.
Well, this kind ofQuantity:I think those who buy Set do not need a lot of spare parts.
View detail
on the basis of
The price was also very reasonable.
I think it's not too bad to use.
View detail
It's just a good product for beginners
I used it for MONKEY's Valve rubbing As others have written, it needs some work to be used In my case, I used it with Oil I still worked with it coming off many times
I think this is just fine because it's not something I use very often It is
View detail
It's useful enough
It was used for the SUPER SHERPA mortise
The Valve and Suction Cup were about the same size, so it was just fine
It looks like there are four Suction Cups in the picture, but in fact there are only two, so if you want to note That's probably all
Compound also had more than enough for the Valve 4
View detail
Assist with Double-sided Tape
It is Z50JjNORMAL of MONKEY.
Although I purchased it for Overhaul, it was still impossible for the Small Valve on the exhaust side.
So I tried to stick with Double-sided Tape. I used 100 thick thick type, but it is quite easy to use and can slide.
As a way of using it may be a wickedness, but as a result it is OK.
Anyway, I use it only occasionally, so I think that it is enough, including the amount of Compound.
View detail
Easy to use
Engine It is essential for OH on waist. It's a bit familiar to me, but it's not that difficult. Cheap and Quantity : With 2pc - Compound also Quantity : 2pc. Recommendation with Set. View detail
The octopus smarks more than imagined
On the EX side it was Large Kimono, but on the IN side I felt quite Small. Valve is also heavy, so I want you to make a bigger octopus a little more.
Because it comes with two types of abrasive, I think that it is good on the Cost side.
View detail
Inexpensive and easy to use
Originally I had octopus and Compound, but I stayed for about 5 years
The octopus rod Suction Cup has broken.
After all, "I had not done many times in my life", so I thought it wasted and threw it away.
After that, SmallEngine Displacement Volume 2 Valve replaces an octopus with a suitable bar, Double-sided Tape and Alumina powder.
Even this was enough, but when it comes to grabbing 4 Volvex 2 Head
As expected the Double-sided Tape is tight. After all I got lost and bought this set of KIJIMA
Was.
The general circulation octopus is Universal which is made abroad, but this of KIJIMA is KIJIMA original
is not it. The handle is slender and easy to handle. Suction Cup part is sucked well and good!
Truly a former Grip Bar shop, it looks like there is no need to break in a few years.
Compound is just right amount. Even if this small amount of people is a normal person it will last a lifetime
I can not finish it.
I highly recommend it..
View detail
Overhaul time
I bought it for rubbing Valve with Overhaul of Head.
It was wood and it was very light and easy to turn. There is a sense of sense as Compound is also set.
View detail
[webike Monitor] It purchased to Valve adjustment of TT350. The airtightness by the side of intake air is no longer maintained, if a Head makes a Head upside-down and kerosene is filled, it will flow into the port side, and it came to become empty in
[webike Monitor] It purchased to Valve adjustment of
TT350.
The airtightness by the side of intake air is no longer maintained, if a Head makes a Head upside-down and kerosene is filled, it will flow into the port side, and it came to become empty in about 1 hour.
although it is cheap goods -- adjustment -- necessity -- it was enough.
although it seems that the sucker of a Spare is [ four size ] attached by the picture of description of item -- goods -- an octopus -- it is that every one Compound of a stick, the size sucker of both sides and inside Sakka, and details is only attached.
In order to use permanently, let's also purchase optional consumable goods collectively.
View detail
This product is used at the time of adjustment of the Valve of the Engine for my Races, and is APE 100 cc. Since the Valve was adsorbed firmly very in a user friendly manner and two kinds of Compounds were also attached, it came to be able to do adj
This product is used at the time of adjustment of the Valve of the Engine for my Races, and is APE 100 cc.
Since the Valve was adsorbed firmly very in a user friendly manner and two kinds of Compounds were also attached, it came to be able to do adjustment simply.
In addition to this, the Motorcycle of the Motocross adjusted the Valve each other using this product, and the Motorcycle here was also dramatically made into the Smooth.
I think that one piece may have the direction by which engine maintenance is carried out!
View detail
A Compound is also profitable by a Set. With the Head in the first half of 6V, although the Valve was large, the sucker was a Limit. On 12V Head, I think that it is severe. The Sizes of the sucker are large 20mm and small 15mm.
A Compound is also profitable by a Set.
With the Head in the first half of
6V, although the Valve was large, the sucker was a Limit.
On
12V Head, I think that it is severe.
The Sizes of the
sucker are large 20mm and small 15mm.
View detail
It is the best for a guide to bedding of a bulb. The compound of inside Sakka and details is a price of levers just. Let's remove a crack by inside Sakka and carry out surface finish by details. He was going to buy the glazing compound for sta
It is the best for a guide to bedding of a bulb.
The compound of inside Sakka and details is a price of levers just.
Let's remove a crack by inside Sakka and carry out surface finish by details.
He was going to buy the glazing compound for stainlesses further, do mirror surface finish of the valve seat, and was frustrated.
however, a cub -- the normal head exhaust side of a system engine has too small [ to correspond well ] a bulb diameter
octopus another only here -- let's prepare a stick and correspond.
View detail