Reviews
watchman
I have been using this all the time on any vehicle for decades. View detail
It's very useful to be sober.
Thanks to this, when you fall down, you can slide on the road surface cleanly and avoid unnecessary damage.
Of course, it is meaningless if the impact is made at an angle close to perpendicular to the Handlebar End, etc.
View detail
Eve Smile
I replaced the Handlebar Grip used for Eve Smile with a Pierced Type and the purchase design was cool, so no problem. View detail
Perfect fit
These were exactly what I was looking for. They match the ones that I saw in pictures on vintage AMA bikes. The fit is nice and tight. I know they're not going to fall out. View detail
Attach Bar end cap for Handlebar to Step end
[How is it used?
I installed a footpeg from Other Brand Product, but the hole for the bolt was left open, so I was looking for something to cover the hole. It turned out to be 18mm, the same as the inside diameter of the handlebar, and I immediately bought this product.
Was the one you received as per Image?
The texture is like DURACON. GizaGiza has 4 with Stages on the part to insert into the hole, but it is also quite hard, so I was a little worried if I could really insert it into the hole.
Was the installation difficult?
Before installation, I sprayed silicon spray on the inside of the footpeg and the insertion point of the bar end cap to improve the sliding. At first, I tried to push it in by hand, but it was still impossible, so I ended up using a plastic hammer.
How was your experience with it?
It was all put together smoothly, as if it had always been like this. It seems to protect footpegBody somewhat even when it falls down.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang for installation:Hammer is a must for installation.
View detail
Surprisingly strong!
With the Bar End installed, I crashed while riding on the circuit, but I think it depended on how I crashed, but the Bar End acted like a slider and the Handlebar did not bend and let the force go. View detail
Introduced to ZETA's Separate handle
[How is it used?
I used it on my ZETA Pilot Handlebar. It was a perfect fit for the inside diameter.
How was your experience with it?
It will be knocked in with Hammer. It's just a Plastic piece, but it's cheap.
How did it compare to other products?
Compared to the Gold genus, it's cheaper and weighs less, so it doesn't feel as heavy on the Handlebar end.
I think that it becomes the Parts that can be recommended when riding in Circuit etc.
It also acts like a slider when you fall over, so I think it minimizes damage to the Handlebar.
[Points to note]
You have to hit it with Hammer to make it fit. If you hit it too hard, it will be deformed.
View detail
From a practical standpoint, this is OK.
It may be a matter of taste, but for me, this is good enough for both looks and practical use. It is the first place where Wound enters if it falls.
Installation is just a tap with a plastic hammer, but it's never come off, even when I've fallen.
View detail
Temporary Bar End
I used this when I replaced the Handlebar in anticipation of installing the Hand guard.
The Hand guard will be available later in the budget, and if I only replace the Handlebar, the OEM will not have a Bar End and the hole will be exposed, so I bought it for temporary relief.
It's not something that will improve performance (vibration control, etc.), and for temporary purposes, I don't think there's anything better.
View detail
It can be used in Circuit driving.
When running a circuit, you can change from the NORMAL Bar End to a lighter one.
It also reduces damage in the event of a fall and is easy to replace as it is an inexpensive product.
You can also return it to NORMAL to keep it clean.
Design is not a good division, so it's not a dress-up.
It's just a part of keeping it lightweight and safe.
Note that it depends on the diameter of the Handlebar.
Please take your actual size before you buy.
View detail
It can be used in Circuit driving.
When running a circuit, you can change from the NORMAL Bar End to a lighter one.
It also reduces damage in the event of a fall and is easy to replace as it is an inexpensive product.
You can also return it to NORMAL to keep it clean.
Design is not a good division, so it's not a dress-up.
It's just a part of keeping it lightweight and safe.
Note that it depends on the diameter of the Handlebar.
Please take your actual size before you buy.
View detail
The hole in the Bar End.
If you're not comfortable with a hole in the Bar End but want to do it cheaply, this is a good choice.
It does not contain any weight, so there is no vibration suppression effect.
It's a replacement for the Slider when you fall down.
View detail
I'm not complaining
It is used for the Handlebar End of CRF and Mini bike used in FlatDirt I am
I use it simply because it's cheap and it's so durable
As far as looks and such, I have nothing to comment on
Anyway, I recommend it for the practicality type
View detail
I put it on just in time …
When I changed the handlebar from POSH to ZETA the other day, the inner diameter was different, so I had to change it from the conventional one The Bar End with Weight that I had attached could not be converted
I put this Bar End which I had in stock in the shop where I exchanged it because it was strange not to put anything on
This product was originally designed for 14mm I.D., and it is not suitable for use with the 13.5mm ZETA Handlebar It's impossible, but I managed it because it's just a press-fit structure
I'm trying to make it in time for now, but I'm thinking I could keep it on as long as the vibration isn't too bad I think
What can I say, the cosmetology is great!
View detail
The Nylon Bar End is a classic
For a long time, the end of the Pipe Handlebar on a custom motorcycle has been
It came with a White Nylon Cap
White Nylon in Black Plating with a Handlebar
This is a classic
But I used this product on a Grass for Race vehicle (YZF-R25)
Regulation-compliant, inexpensive, and difficult to catch in the event of a fall You can expect to have less damage to the Handlebar
I haven't checked if it's attached to the OEM R25 handlebar
Anodized aluminum gleams on the shiningly dressed dress-up however
You can't get any better than this
View detail
Lightweight and fully functional
I bought it to improve stability by reducing the weight of the Handlebar area
It is necessary to use a plastic hammer to fix it in place by plastic tension There is a
This will hold it in place so tightly that no amount of motorcycle vibration can take it off
If it is the Bar End of the type that fastens the ordinary screw, the size of the fitment size may vary from individual to individual Even in the Handlebar
Although there are some disadvantages such as very loose or hard installation and dismounting, the screw comes loose
With Bar End, you won't have any of those problems
It may be difficult to reuse after removal due to its structure, but it's cheap and I don't mind it
You can easily remove it by pulling with Neji-saurus etc
I have never experienced an accident, but it was not able to function as a bar end, but it was not able to be used in the event of a fall during work
I only had to replace the Bar End as it protected the Handlebar despite the damage
It is even lighter than the Screw-type Bar End of Aluminum Handling and
It helps to improve straight-line stability
It won't be a dress-up, but I want to reduce the weight of the handlebar area I want to protect the Handlebar
It's a great choice for people who are likely to replace their Bar Ends frequently
View detail
Beautiful
I installed it in GORILLA
Installation was easy, just one tap with a plastic hammer and it was done I used to install the Bar Ends made of Gold, but it was much easier to install than the other single car in the garage I think it will reduce the Damage when you hit a car or a car
Price is Reasonable, so if you want to be (Scratches, deformation, etc.) The replacement is economically helpful
View detail
sufficient!
It's cheap and just plunges. Even if it rolls lightly, it is shaved and it guards firmly.
I do not feel like using anything else.
View detail
Size did not match
I could not use it with Susuka for AF 28,
I hope you can use it with other Motorcycle, but I have not tried it
I think that it is inexpensive and affordable if you make sure of Size firmly.
View detail
It is strong for the price.
Even if you fall down for low price Handlebar will not bend without bending. It is surprisingly strong. Expensive looks and CoolBar end cap are also good, but I think that this is enough considering falling. My son was present at the Minimoto race and it fell several times, but it is not yet a level to exchange. It is recommended. View detail