Reviews
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA WR250F (WR250FS), YAMAHA WR450F (WR450FS), YAMAHA YZ450F (YZ450FS)
Genuine Yamaha Left Side Swingarm Cover for YZ125 2004
This bike came in with a lot of issue and a lot of smll niggly parts that needed replacing. The swingarm cover on the left hand side was completely missing for some reason or another. Might as well just buy a new one which will help protect the pivot bolt nut on this side. I also needed to get the right hand side as this was also missing too. I did have a couple of other parts for this bike in the order so I got them all shipped together to save on a bit of cost. I generally use EMS as they just get the job done fast. In 5 days my order was at my door and was all presented in perfect condition. The packaging was excellent as always with Webike. The cover came in the regular Yamaha packet and was just as expected. It is made from a plastic kind of material and was a moulded part. Makes sense really. It is basically a dust cover to protect the nut on the pivot shaft. Obviously, as this is an off road bike, you do get a lot of dirt that could easily make its way in there and cause some issues. Fitting it just a push on and that's it. A nice snug fit and hopefully, this will stay in situ for a long time to come. Overall, very happy with this purchase. View detail
Fits: HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB400F
For CB250F
I am happy to deal with the webike team.Actually this item i could not found in my country (Batsugu, Service Butsuku 77251-342-000). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R
For CB250F
It is genuine. I am happy to deal with the webike team.Actually this item i could not found in my country (Nut,Cap 6MM 90201-415-000). Finally I bought it from webike. Very good packaging.fast shipping. View detail
Fits: HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CR250R A, HONDA CR250R A, HONDA CR250R A, HONDA CR250R A, HONDA CR250R A
For CB250F
Genuine Rubber, Stomper Cost performance and comparison with other products reasonable price, About shipping and packaging good packaging.Thanks to the webike team.highly recomended. View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F
For CB250F
Actually this item i could not found in my country (Bolt,Flange 8X35 90161-ML7-000). I am happy to deal with the webike team. Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. View detail
Fits: YAMAHA MORPHOUS, YAMAHA TMAX, YAMAHA TMAX, YAMAHA TMAX, YAMAHA TMAX, YAMAHA TMAX, YAMAHA ZUMA FX (YW50FXEL), YAMAHA ZUMA FX (YW50FXEB), YAMAHA ZUMA 50FX (YW50FXJS), YAMAHA ZUMA 50FX (YW50FXJR), YAMAHA ZUMA 50FX (YW50FXHS), YAMAHA ZUMA 50FX (YW50FXHR), YAMAHA ZUMA 50FX (YW50FXGW), YAMAHA ZUMA 50FX (YW50FXGS), YAMAHA ZUMA 50FX (YW50FXFW), YAMAHA ZUMA 50FX (YW50FXFL), YAMAHA ZUMA 50F (YW50FKS), YAMAHA ZUMA 50F (YW50FKR), YAMAHA ZUMA 50F (YW50FJS), YAMAHA ZUMA 50F (YW50FJR)
Genuine Yamaha Seal for TMAX
This was a replacement fuel tank seal that was needed for the TMAX I had in from a customer. There was a small tear in the seal which was casued by user error. No point in messing around with sealant when you can just buy a genuine Yamaha one cheaply like this. Finding the right seal was super easy using the tools Webike provide in their help section and then cross referencing with Yamaha schematics. The price was really cheap which did surprise me and it was a lot better value than sourcing locally. The seal and some other parts were all shipped using my chosed courier, who is EMS. My order arrived in perfect condition in 5 dayas from being shipped. The seal came in the standard yamaha packet and was inside a bubble wrap envelope to keep it safe. The seal itself is a moulded part as this needs to be pertty exact to make a good seal. It is less flexible than I thought it would be but that is not a bad thing at all. It serves its purpose and that is what is needed for the fuel tank. Fitting was easy after removing the fuel cap by the small screws. Refit and that was it. Nicely sealed fuel tank once again. Thanks Webike, very impressed. View detail
Fits: HONDA CBR900RR, HONDA CBR900RR, HONDA VFR750F A, HONDA VFR750F A, HONDA VFR750F A
For CB250F
Genuine standard key. Cost performance and comparison with other products reasonable price, About shipping and packaging good packaging.Thanks to the webike team.highly recomended. View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100S, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA GL1500, HONDA GL1500
For CB250F
I am happy to deal with the webike team. Actually this item i could not found in my country (NUT, SPECIAL 33128-MAH-671). Finally I bought it from webike. It is genuine. Very good packaging. fast shipping. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZFR6 (YZFR6PC), YAMAHA YZFR6 (YZFR6P), YAMAHA YZFR6 (YZFR6NC), YAMAHA YZFR6 (YZFR6N), YAMAHA YZF1000RJC, YAMAHA YZF1000RJ, YAMAHA R6 (YZFR6MC), YAMAHA R6 (YZFR6M), YAMAHA R6 (YZFR6LC), YAMAHA R6 (YZFR6L), YAMAHA R1 (YZFR1LC), YAMAHA R1 (YZFR1L), YAMAHA CHAMPIONS LIMITED EDITION (YZFR6SNC), YAMAHA CHAMPIONS LIMITED EDITION (YZFR6SN)
Genuine Yamaha Bulb Socket Cover for YZF-R1 2002
This was a replacement I needed after servicing the 2002 YXF-R1. The headlight bulb needed replacing and whilst I was working on this, the bulb cover was ripped and was not sealing to prevent water from penetrating. Clearly, this needed fixing fast. I found the rigt part by using the Yamaha schematics which is easy to navigate. The price from Webike for the cover was really good value. With a few other smaller parts in my order, I had them all shipped with EMS and the order arrived in 5 days from being shipped from Webike warehouse. The order was well packaged and there was no sign of any damage. The bulb cover came in the standard Yamaha packet and was also inside a small bubble wrap envelope. The cover is a good moulded part and the rubber is flexible but strong and will not rip in a hurry. Not a hard job to do but be careful not to touch the bulb glass or this could end up in a blow bulb once you check it. Very annoying to have to take all this apart again to change the bulb. Very happy with this purchase and not I am sure that this is water tight yet again. Thanks Webike. View detail
Fits: HONDA VTX1800, HONDA VT750S, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750CS, HONDA VT750C2S, HONDA VT750C2S, HONDA VT750C2S, HONDA VT750C2F
For CB250F
About quality and texture Great Genuine Product About shipping and packaging Very good packaging.fast shipping. Thanks to the webike team. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA BENLY50CD90
Parts that rarely break - Rare Case (LOL)
Flywheel has been replaced!
I don't have a Pin, even though it's called Flywheel. (;・∀・)
→ I replaced it because it was rusted.
Flywheel
。 It stores the rotational energy generated by the engine and transmitted to the crankshaft, supplies it to the drive wheels, and helps the engine to rotate by inertial force. The crankshaft is the engine's weight. It is neither too light nor too heavy.
[Flywheel has a glitch.
‥
▲Clutch will not disconnect, when Clutch is connected. "Skinny The symptoms include vibration and abnormal noise.
▲Idling is not stable and vibration increases.
By the way, in my case, I felt a strange noise when changing GEAR and Idling was going up and down (lol).
→ I thought it was because the weight had changed due to corrosion from rust or something.
In fact, Flywheel is basically not subject to much wear and tear, and with typical use can often last as long as the life of the vehicle body.
*On the contrary, when it becomes unusable, → corrosion or chipping.
Replacement Procedure]
1) Remove the middle nut with a universal holder and a socket wrench. 2) Remove the middle nut with a socket wrench.
↓
(2) Remove Nut and Washer.
↓
(3) Screw in the head of the Fly Wheel Puller.
Prepare for the Fly Wheel Puller, because it cannot be removed without the Fly Wheel Puller.
↓
(4) Since it is an Opposite Thread Screw, it is tightened by turning it counterclockwise.
↓
(5) Screw in the puller screw. 。 Normal Thread Screw.
↓
6) Place the MONKEYSpanner between the Head and push the bar down to easily pull it out.
↓
(vii) By turning the Shaft of the Puller and pushing in the head of the Crankshaft, the Flywheel comes out in front of the Flywheel.
↓
Replace ?Flywheel and assemble with ?→?.
[After exchange]
◎The noise during Gear changing is gone.
◎No strange vibrations 。
I think Rust caused this symptom because the Flywheel was not performing normal rotation and rotation timing.
It is rare that Flywheel cannot be used, but you should check it when you feel the symptoms or have a chance to open the crankcase.
Especially for older CUBs.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It is also the identity of SR.
Fork Boots are a distinctive feature of the SR400's appearance.
Material:Of course, the parts are rubber parts, so they will deteriorate over time...
It was torn and I replaced it with a new one.
What is Fork Boots anyway?
Front fork boots
It is a part to protect Inner Tube from dust, stepping stones, mud, etc. 。 They are made of natural rubber or silicon rubber and are bellows-shaped.
It has a strong visual component, but what is its role?
The role of Fork Boots.
Spring is attached to the outside of Suspension and used as a cover to prevent Garbage from entering Spring in the Inner Tube, which is used as Spring's Cover.
Originally, Fork Boots were used on Large Motorcycle models with the spring on the outside of the suspension (early Tele ScauperPick models) to prevent rocks and other objects from getting caught in the spring and making it dirty unless the spring was covered.
Later, when Spring was placed in the Inner Tube as it is today, it also began to serve as a Dust Seal. This is what→SR is for.
(2) Attachment for a Classic look and feel.
Since current motorcycles are equipped with a dust seal, it is not functionally necessary to add a dust seal, so it would be a press-up element. However, if there were no Dust Seal, the protection of the Dust Seal on the Fork would be lost, so there is no denying the danger of Garbage and other contaminants getting inside the Fork.
→ Functionally requiredParts and understanding.
There are many Fork Boots for SR on the market, from OEM to Other Brand Products, and although there are personal preferences in design, I chose OEM because of its durability and reliability, considering it as a consumable item.
Replacement procedure - in the case of SR
Remove the front wheel.
↓
Loosen the Bolt on the Top BridgeSIDE.
↓
(3) Remove the +Screw holding Boots at the end and set it to Free.
↓
Loosen two bolts in the "Under" section. Loosen two Bolts of the Under part. 。
↓
(5) Pull out.
↓
(6) Insert new FrontBoots and assemble in the order of (4), (3), (2), and (1).
If you ask a store to do it for you, they will charge you 10,000 yen (laughs), so I think it is better to do it yourself if you can.
[Effect]
It is not a part that can be felt, so it is not effective, but it can protect the Dust Seal of the Fork, so there is peace of mind in driving.
Fork Boots are still old-fashioned parts, and I can't deny the feeling that they are going against the times, but I think they protect the inside of the fork in addition to the dress-up effect, and I feel that they are one of the faces of SR motorcycles.
Fork Boots→Dust SealCover is also available, if you prefer.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125G, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125X, YAMAHA YZ250G
Genuine Yamaha Front Wheel Oil Seal for WF450F 2017
This was the oil seal for the front wheel on the WRF450F which needed new wheel bearings. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 5 days from being shipped. The oil seals came in th standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125G, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125X, YAMAHA YZ250G
Genuine Yamaha Front Wheel Nut for WRF450F 2017
After replacing the wheel bearings and the oil seals for this bike. I also wanted to replace the wheel nut as this had a lot of damage and although right now, it is still ok, at some point it will need replacing anyway. Might as well get this all done at the same time right. Finding the correct nut was easy as I just checked the Yamaha schematics I had already opened. This nut is good value and as it is a wheel nut, it needs to be right first time. With a few other parts in this order for the bike, I got them all shipped together using EMS who are my chosen courier. In 5 days from being shipped from Webike warehouse, my order arrived safely. The wheel nut came in the Yamaha packet and was wrapped with the oil seals together to keep it safe. This wheel nut is a well machined nut and the threaded section is silky smooth. Install is a simple replace with new from old. Torque the nut and away you go. Thank you for the help Webike. Very happy customer. View detail
Fits: HONDA PCX150, HONDA WW150 AC
Genuine Honda Air FIlter for PCX150 2012
New air filter needed for this baby of a bike. I have had other air filters before and not been overly impressed. Decided to go for stock genuine Honda for a change. Finding the correct part was simple and I used the help pages Webike provide and cross referenced with Honda schematics to confirm. The price was really good for a genuine Honda and as I had other items in the order, the shipping was cushioned somewhat and very reasonable. Delivered by EMS standard within a week of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Honda kit. Very happy with this item. Thank you Webike View detail
Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Top Choice Bearings,oem brand
My water pump bearing was shot, so decided to replace in seals,orings and bearing.Zero issues with install. Did the freezer and heat gun method. Perfect fit! very high quality and fit awesome! Only thing i would say is to throw some more grease into them, otherwise awesome. View detail
Fits: HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R
For cb250f
Genuine product 94103-06700 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Fits: HONDA CB750F, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CT125, HONDA CT125, HONDA CT125, HONDA CT125, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500
CB250F MUFLER COLLAR
Genuine product - COLLAR, FR. FENDER 61104-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Fits: HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
For CB250F
About quality and texture genuine productAbout quality and texture Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging View detail
Fits: HONDA XR250, HONDA XR250, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S
CB250F MUFLER PROTECTED RUBBER
This is used to protect the bend in case of any shock Genuine product -Rubber, FrontFender Mau 61103-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail