Reviews
no problem
There were no problems, and the product could be used normally. View detail
Probably shoddy
I was able to use it, but the bearing assembly of the rotating part is not right.
The rotation at the time of jack-up is terribly heavy because of it.
As delivered, the grease of the moving parts was dirty and covered with iron powder and dust,
I took it all apart and Greased it up again before using it.
View detail
For maintenance of GlassCoating vehicles
I use it on my glass coated cb400sb and dio110. It is also used on cars, although it is listed as for motorcycles.
It is ideal for GlassCoating vehicles as it does not seem to contain Wax and is cosmetically excellent! It is also EXACTLY for shipping adjustments!
View detail
historical legacy
Wow, so many people writing imprements on just Nozzle!
When I was on my 2nd, I kept a 1 liter can at the fueling port in the back of the car. Replenishment." The best time to do this was when I was
We didn't weigh the Levels exactly, and it was routine to dispose of the entire can after 3 or 4 refills (and it was free back then).
On the other hand, when pouring more than 3Liter in 4st Engine oil change, there is not much Merit.
It would be much faster to transfer the required amount to a jug or use Bellows long funnel...
But there is something quaint about attaching it to the mouth of the G1 one at a time and waiting for the last drop to fall out.
I think it is a gem that has supported Sunday Motorcycle.
View detail
Easy to use
Uses as expected and performs well View detail
Nozzle
I think the product is good.
I changed the engine oil for the first time in about 10 years.
I was very enthusiastic, but the oil leaked out of the BWS125 because the place where the engine oil is put in is at an angle.
Next time I will use Funnel. But my hands get dirty too, so I may leave it to Shop.
View detail
Purchased at Wash for Vehicle:!!!!!
[How is it used?
I bought it in a wash-for-vehicle.
Was the one you received as per Image?
It is about the size of A3Size. I feel that the water absorbency has decreased as the frequency of use increases.
How was your experience with it?
I am satisfied with the product because it generally absorbs water.
View detail
I love it!
I tried them on and found that the size was Exactly the same as usual. The sole is thin, but I feel that it is a good thickness for motorcycles. The steel core in the toe gives a sense of security and at the same time makes it easier to change gears. I think it is a good product in terms of cost performance. I want another pair. View detail
I think COSPA is expensive
I have been wearing them with Insole since the beginning because many Net reviews commented that the bottom was too thin.
This is my first pair of Riding shoes, so I can't compare them with High-grade ones, but they are by far the easiest to ride Motorcycle with compared to Sneakersetc.
I think this is a good choice for first-time Riding shoes, including the price point.
By the way, as stated in the review, this one is also one size down from my normal shoes.
View detail
Ame Zing indeed.
Remove brake dust, chain oil spatter, and other contaminants.
Thinking back, I remembered that Gekiochi Kun also had a similar Dustcloth for Kitchen (for kitchen grease stains).
I recommend CROSS because it is so powerful that even dirt stuck on CROSS can be washed off surprisingly cleanly.
View detail
Purchased for summer
I used to be in Boots in the summer, so it's just more comfortable to be in Shoes up to my ankles.
It is easy to put on and take off because it can be fixed with ankle Belt. The toes also have steel protectors, so those who are concerned about them may be at ease.
I just started using it, so I don't know how durable it is, but I had no problem using it for 3 days in a row.
The soles feel comparatively thin, but it is easy to get a sense of where to step on the Brake pedal, which is helpful in some areas.
If I had to make a complaint, I would say that when you remove the belt that holds them at the ankle, they naturally stick to the ankle and are sometimes difficult to take off.
View detail
GOOD for easy cleaning
I was looking for a WetCROSS without Wax effect since both my two Motorcycles and Helmet have commercial Spray type GlassCoating. This product is excellent in that respect.
The material is thick and easy to use. By the way, it was sold at a certain home center for 360 yen. You can have as many as you want, so I think it's perfect for adjusting shipping costs.
View detail
Different texture from real leather, but looks durable.
I used it in comparison to the genuine leather ChammyTowel.
White water stains will form if not exposed to water well before Spec.
It is recommended to flush well with water stored in the Bucket before use.
Since the material is a little hard, I am a little concerned about scratching the painted surface.
However, it is also highly absorbent and does not harden after drying, so it can be folded and stored neatly.
The size is just enough to cover the top of the Motorcycle Tank, see image.
View detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON , HARLEY-DAVIDSON Touring, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON Touring, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON XL1200C SPORTSTER 1200
Oil change
When I applied the Engine and drained the Oil, I couldn't tell the boundary between the old residual Oil and the new Oil.
Is it because they're mixing it up when they're refilling the Oil?
It was a little different from what I imagined.
I think the idea of the product is very interesting!
View detail
Cheap and easy to use
You can use anything from Oil to Gasoline.
I purchased this for my Oil4Liter cans.
It has a wide range of applications!
I have no complaints at this price, but if I had to say, I would have liked it to be 5 cm longer.
View detail
so so
There are many inexpensive Microfiber Cloths nowadays, but they are priced at about 1,200 yen, which is a strong price.
I wiped up the Ta Brett that was fogged up with hand grease with Dry, and it was clean without being spread out, but I think this area is the same for micro fiber as well.
Compared to Micro, Merit has almost no fur, so it is less likely to hold debris and Garbage, and the volume of the fabric is also less, so it is easier to carry in Touring.
I don't know how it will look in the long run, but I cut it to test it out and it is indeed clean on the end face with no fraying.
It is a good product, but I would like it to be a little cheaper because it is a consumable item and I need a number of them.
View detail
Necessities when changing Oil
This is the first time I have used this product, and it is a convenient product that fits tightly into the mouth of Honda's UltraG1 and can be disposed of as is.
However, if the engine is a Vertical TypeEngine and refueling is done from above, the nozzle part is a little short, and there were times when the oil would spill unless the kick pedal was removed on my vehicle.
I would be more than happy to have a longer Nozzle as a separate Spec.
View detail
Cheap Oil nozzle
If oil is poured directly into a motorcycle, there is a risk of spilling it, so it is safe to add a nozzle.
I bought this product because it was recommended to me. There is nothing special about it, but I think it is a product that can be recommended to everyone because it is inexpensive and has no problems in use.
View detail
Handy to have.
MicroCROSS is just convenient for wiping down helmets and the exterior of motorcycles.
I use the Barriers coat by WAKOS, and it is just right for wiping up beautifully without worrying about scratches, especially when using such Coating type Chemicals.
View detail
Usable but a little unreliable.
Used in Step WGN Maintenance of Transporter.
I felt it was smaller than I had imagined. Compared to the one I used to borrow from a friend, which was about two sizes larger, I felt it was a little inadequate.
But even on Specifications, the use itself is not a problem.
View detail