Reviews
Purchased due to the appeal of the cosmetics.
First-class products are always better, but I thought that a measuring instrument of this price would be sufficient. It is more reliable than no management. There are many comparison videos on Youtube, and I found them to be very helpful. If you want to be absolutely particular about tools and equipment, I recommend you to buy a first-class product from the beginning because you will lose money by buying a cheap one. View detail
Fits: HARLEY-DAVIDSON Universal
Voltmeters for Motorcycle
Although not particularly necessary, a voltmeter was installed since it is also attached to the car.
White light is also provided, making it easy to see at night.
KITACO for mounting on Mount bar (KITACO) Meter clamp set Motorcycleetc. 672-1126900, etc. required.
Other items in the photo are KIJIMAHandlebar Mount Bracket, Eye PRO ShiftIndicatorAPH8 Red, SP Mukawa Φ48Small DN Tachometer 12500rpm (with Rev indicator)
View detail
Power management for old cars!
Purchased to manage power supply for old car!
I am impressed with the function-specific split, and I love the fact that I can visually determine the information I need!
View detail
I can't connect to the dedicated Site at all, so no.
If you don't improve Site, it will be useless. View detail
It is still a necessity for old motorcycles.
The vehicle is 30 years old, so I installed it to know the electrical system Trouble in advance.
This product is small in size, so there is no sense of discomfort even if it is installed in an easily visible place.
Wiring is also easy and practical.
View detail
Overall, KO!!!!
I am satisfied with the well made product, but I have old eyes and it is hard for me to see the memory.
Otherwise, it is OK.
View detail
Koso mini 3
The product matches the description, the product is not available in Vietnam so you have to wait for shipping from webike Japan at a quite high price. I tested it and it works perfectly. View detail
Not bad, but,
Not bad, but the lock part is sometimes subtle and difficult to use. View detail
Small Type
The DAYTONASmall Type Air Gauge is an easy-to-use product with good visibility. If I had not been concerned about the price, I would have chosen WITH HOSEKI. View detail
Torque management of Oil replacement
I used to have Dealer replace the oil, but I decided to purchase it to manage Torque so that I don't make mistakes when I turn it by hand.
The product has a solid weight and is easy to use.
I thought the Torque range could be used for Motorcycle maintenance.
Since I am a beginner, I thought it would be better to have a more detailed Instruction Manual on how to use the Torque wrench. I was wondering if you could give me more details on how to use the Torque wrench, such as how to adjust the Torque value after use, how to use it in a tight space, etc., since it says not to use a joint, etc.
I think the product itself is satisfactory for the price.
View detail
Peace of mind knowing the status of Battery
The battery for two-wheeled vehicles is smaller in capacity than that for four-wheeled vehicles,
Access to BatterySpace is so bad,
It is difficult to know Condition easily.
But with this product,
Highly accurate voltage information can be obtained via smartphone.
Use with Battery Charger,
Even Motorcycle without Kick starter,
We have been able to use the system without excessive worry about battery uptime.
The same product would be used on two Motorcycles,
If they are parked close to each other, there is a possibility of mixed signals.
If improved, it will be easier to use.
View detail
Buttons are hard, so operating them while driving is a bit dangerous.
There is a clock in the GSR Meter, but since it can only display one thing, I can't see the clock when it is in TRIP view, and it is a pain to switch positions at any time, so I bought this one.
I also bought one with a Thermometer and a voltmeter.
The size is small and good, but the button is just too hard. 。 And at this price of over 6,000 yen, I wanted it to be a radio-controlled watch.
Visibility at night is no problem at all.
The Large Gap on the watch is less than a month, but nothing special.
I think the attached Harness should have been about 300mm longer. 。 It seems that many vehicles probably can't reach LimitBATT, and I couldn't either.
The feeling of using the Others is neither particularly pleasant nor unpleasant, but it is a product that has been sold for a long time, so I think it has a certain reliability.
Personally, I had installed a Kaedere USB with voltage display function separately as a function, so the clock and Thermometer were enough, but this product is connected directly to the BATT, so it is a little fun to see the error.
The Thermometer is installed in a position that does not interfere with Cowl, Destruction and Wiring, but it displays about 2°C higher than the outside temperature system on the road.
I am not sure if this is the correct value or if there is an error in performance, since it is the same no matter how the position is changed, but I am using it as a guide.
And it's usually a clock display.
It is a reasonably priced product and I would like it to last about 3 years.
View detail
Small and can be installed anywhere.
I have installed them on all my cars. It is easy to install, just connect the 3 wires to the designated points, the back light comes on, and it is small but easy to see. View detail
Not with this one, though.
Torque range is not wide enough to be configured (Low) And, Large tightening Torque setting is out of range. 。 It is useful only for low-tightening Torque, which is below the setting range for high-tightening Torque. 。 You should have it if you want to maintain it carefully. View detail
Low Torque
I had a Torque wrench over 20N, but the suspension etc.
For the low Torque indication part, I used to tighten it by hand Torque.
I purchased this for low Torque for safety reasons.
I thought about DigitalSpec. but the part that would be mechanical”Snap”.
I chose this product
The feeling is not bad and it is useful.
View detail
Inspection supplies that penetrate regardless of Material
[How is it used?
The power supply when installing a USB power supply, etc., and the earth search.
Was the one you received as per Image?
The package is simple and as shown in the Image.
It is unexpected that the tip of the terminal is quite sharp, perhaps to enable inspection by sticking it into the Plain Type Terminal.
Cap is included but was missing when I noticed it and may have been somewhat loose
How was your experience with it?
Although it was not possible to measure any voltage or current, it was possible to check various points with Earth clamped in appropriate places to see where the power source was coming from.
Since Cable is about 80cm, after checking Plus and Minus, we were able to try out the fixation points with pathways and Tie Wrap as it is.
Since it can be purchased for only one coin in terms of price, it is not so regrettable in case the Cable breaks or disconnects when it is bent at a steeper angle than expected by Handlebar, for example.
After installing all the electrical components, it is no longer used for measurement, but it is increasingly used as a tool for drilling holes because of its sharp tip and Gold price, which is not too high even if it is broken.
I've penetrated quite a few polyesters and skins, and the tips still remain sharp enough to be painful to the fingertips.
[Points to note]
The tip is sharp enough to easily pierce paper, thin plastic, cloth, and skin, so it is quite painful when it pierces the hand.
How did it compare to other products?
Compared to most products, the price is much lower due to the fact that the equipment does not measure.
Where can I get power and where can I connect it to use the electrical components? I recommend this product for people like me who think that all they need is to search for the answer. On the other hand, I want to see the values of electricity that I can't see. I want to work while watching. I do not recommend this product to such a person.
View detail
Graduation from Hand Torque
I wanted a Wrenchunch for low Torque and purchased it.
I used to do it by hand Torque, but now I can do it around Brake, etc.
It was good because I wanted to tighten the important parts with the designated Torque.
The more expensive ones may not have any errors, but from the hand Torque
I think the accuracy has improved a little.
View detail
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail
![KOSO Mini3 Digital [Current Volt Meter]](https://img.webike-cdn.net/catalogue/14762/04292333_517e84cf54709_TS.jpg)
Small but easy to see and use!
Since it is a SPMODEL, it is not equipped with any convenient functions such as a clock, and since the crank is heavy, the cell will not turn even if the voltage drops a little, so it was installed for voltage monitoring.
【good point】
Anyway, the body is small, so there is no need to worry about the mounting position.
Back light is bright enough to see well in the Tunnel.
The temperature has little use, but the clock and voltmeter are essential.
[Trouble.
In order to make the power supply extraction SMART, we extended the electric Cable to the Battery installation area by ourselves.
IgnitionON is connected to the Wiring of the ETC, and Always ON is directly connected to the Battery+ terminal.
[Still unclear].
I don't know what happens when it hits the rain.
View detail
Recommended if you want to DIY power supply
If you are a DIYer who installs USB power supply, electric heating equipment, etc., you should have one of these to get the job done.
It is also useful to know the +- polarity
View detail