Reviews
Priced right and no damage to the adjuster.
Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View detail
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Low price but sufficient Quality
The price of Motion pro was too high, so I went with this one. The price is a quarter of the price, but the quality is solid and this product should be sufficient. The box is just a bonus, and the lid closure is so roughly made that it won't close after a few uses. View detail
Chain cleaning essentials
[How is it used?
Used to clean Chain every 500 km.
Chain cleaner is sprayed on and then shakily scrubbed.
Was the one you received as per Image?
As per image.
If they cost more than 1,000 yen each, a little more BALIetc. surface treatment would be nice, but it does not affect the performance.
How was your experience with it?
The size is just right for MotorcycleChain, and the back and underside of the chain can be easily cleaned.
[Points to note]
Spraying and scrubbing with the Cleaner will clean the Plate surface of the Chain and feel good, but it is important to use a Large amount of force to avoid damaging the Seal Ring more than necessary.
How did it compare to other products?
I think DAYTONA and others are almost the same in shape and performance, but the Brush part seems to be interchangeable.
Other items that would be helpful
Items to buy together
・Maintenance Stand
・Chain cleaner
・Chain lube
・Dustcloth
Rubber gloves etc.
I think Chain maintenance can be done anyway if there is a
View detail
On roadMain for people who clean regularly.
[Feeling of use]
Brush has 3 sides for quick cleaning.
The softness of Brush is hard.
Brush is hard and dirt bounces off when rubbed hard.
Brush is difficult to apply to small areas, so it is better to prepare a soft brush separately for hard stains.
(Points to note)
Brush width can be changed, but when the width is made narrower, the brush cannot be fixed and immediately comes off, making it unuseable.
View detail
Solid easily adjustable but sprockets smaller than I required
This tool is multi-purpose; You can use it to remove the variator, flywheel, front sprocket and clutch. This was purchased to enable me to remove the front sprocket for bike. Although it did work, it was rather fiddly to use and the assistance of an additional pair of hands to held was needed. Product solid and quality.The tool itself is looks as though it will last long time. View detail
Fits: BMW K1600B, BMW K1600B, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW , BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW C600 Sport, BMW C650GT, BMW F750GS, BMW F800GS Adventure, BMW F800R, BMW F800R, BMW F800R, BMW F850GS, BMW F850GS Adventure, BMW K1200GT
high
KTC's Hexagon socket was half price, so I bought that.
Inch size, so it's not available in stores.
View detail
Commonly usable
It is not difficult to use and can be used normally.
In the usage situation, the handlebar is removed from the vehicle body, the handlebar is fixed in a vise, this product is installed, and the cut is performed.
It is not a tool I use often, but I think it is worth the price.
View detail
Pump without ActiveAir
It is an indispensable item when replacing brake fluid and brake hose! At first glance, it looks like just a manual pump, but if you know the principle of air removal, this is enough without buying an effective pump! If it breaks, I will repeat again! View detail
Chain cut
Since the installation chain is unknown, I bought a little longer and bought this one for a trial because it was cheaper here to cut it.
Although it will not be used often, it corresponds to chain size, 420 to 530, so it will be useful to have 1 pc.
It seems sturdy for the price, and seems to be fine for use.
View detail
It backfired a little, but I was able to lubricate it successfully.
Lubricated when replacing Clutch Wire. Used Bell HammerSpray. View detail
Cable lubricant
An excellent cable lubricator. I have already tried it, it lubricates well, it can be used for any of your equipment, it is very convenient. I recommend it to everyone. Excellent cable lubricant. I’ve already tried it, it lubricates well, can be used for any of your equipment, very convenient. I recommend to all. View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Convenient to have
I bought this tool to remove the clutch lock nut on my NSR50. It is not impossible to remove the clutch lock nut without this tool, but it is safer to use this tool because the lock nut is tightened by a considerable torque. The feel of using this tool is not as accurate as the DrumstickDrumstick, so it is difficult to apply force if you do not support the tool when using it. If you have an Impact wrench, you may not have to worry about this kind of feeling. View detail
Spring in one shot.
I purchased this product for use in Silencer replacement.
Before I bought this product, I had to struggle with pliers and my fingers to finally install it, but I was able to install it in one shot.
It is a part that I am tempted to be stingy with because I don't use it often, but I think there is no harm in buying it because it makes things much easier.
View detail
Chain cleaning essentials
There are many similar products, but I personally think DAYTONA has the best cosmetics.
The workmanship is rather sturdy and does not seem to break down for a while.
I'm not good at detail stains, but I know what I'm doing originally, so I'm going to finish it off with a tooth Brushetc.
View detail
It worked!
[How is it used?
I purchased this to remove the Pulley area of my PCX125 JF56 as part of a drivetrain refresh.
Was the one you received as per Image?
It was solid and sturdy as per Image.
The weight was quite heavy.
How was your experience with it?
It worked normally. However, I think it was replaced by Air impact, so I didn't have much of a chance to use it.
I would use it again when messing with weight roller etc.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Brake fluid replacement
Used for brake fluid replacement. Although it is a little expensive View detail
Quantity:Cover Honda vehicles with the OEMSpecial Tool from Set
OEMSpecial Tool so you can service it with confidence! View detail
Thank goodness for special tools
I used to work with an iron saw, but I bought a special tool. The solid handle makes it easy to work with, and prevents the outer surface from getting scratched. View detail
Fits: KTM , HUSABERG FE250-501, HUSQVARNA FC250-450, HUSQVARNA FE250-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150-300, HUSQVARNA TX125, HUSQVARNA TX300, KTM 125-300XC-W, KTM 125SX, KTM 150SX, KTM 250-500EXC-F, KTM 250EXC, KTM 250SX, KTM 250SX-F, KTM 250XC, KTM 300EXC
Buy Fork Springfor Replacement
I used it on my MY22 KTM250EXC to replace the Fork Spring. It works fine, but a 24mm Spanner would be useful too. View detail